Elektrik Makinelerinde Hairpin Sargı Teknolojileri ve Uygulamaları

Abstract

Bu çalışmasında, elektrik makinelerinde son yıllarda yaygınlaşan hairpin (dik-dörtgen iletkenli) sargı teknolojisi çok boyutlu olarak ele alınmıştır. Çalışma; hairpin sargının temel prensiplerini, geleneksel yuvarlak kesitli tel sargılarla farklarını, elektromanyetik ve termal davranışını, üretim süreçlerini, yalıtım ve güvenilirlik konularını ve başlıca uygulama alanlarını kapsamaktadır. Özellikle elektrikli araç tahrik motorlarında önemli bir parametre olan oluk doluluk oranı, güç yoğunluğu, AC kayıpları, NVH (gürültü-titreşim-sertlik) etkileri, maliyet ve seri üretime yatkınlığı arasındaki tasarım kısımları ele alınmıştır. Ayrıca literatürdeki güncel yaklaşımlar doğrultusunda çok fizikli modelleme, gelişmiş malzemeler, bağlantı (kaynak/brazing) kalitesi değerlendirilmiştir

Keywords

• Hairpin sargı
• elektrik makinesi
• AC bakır kayıpları
• doluluk oranı
• elektrikli araç
• üretim teknolojisi

Hairpin Winding Technologies and Applications in Electrical Machines

Abstract

This study comprehensively examines hairpin (rectangular conductor) winding technology, which has become widespread in electrical machines in recent years. The study covers the basic principles of hairpin winding, its differences from traditional round wire windings, its electromagnetic and thermal behavior, manufacturing processes, insulation and reliability issues, and its main application areas. In particular, the design aspects concerning slot filling ratio, power density, AC losses, NVH (noise-vibration-harshness) effects, cost, and suitability for mass production—all important parameters in electric vehicle drive motors—are addressed. Furthermore, in line with current approaches in the literature, multi-physics modeling, advanced materials, and connection (welding/brazing) quality are evaluated

Keywords

• Hairpin winding
• electrical machinery
• AC copper losses
• filling level
• electric vehicle

References

1. [1] S. Ghahfarokhi, A. Podgornov, C. Gerada ve M. Galea, “Analytical modelling and design optimisation of AC copper losses in high-performance hairpin-wound traction electric machines,” Machines, c. 10, sy. 7, s. 508, 2022, doi: https://doi.org/10.3390/machines10070508.
2. [2] A. Hebala, C. Pastor, M. Hamiti ve C. Gerada, “A comprehensive review of electrical machine winding technology evolution and challenges,” Machines, c. 10, sy. 9, s. 731, 2022, doi: https://doi.org/10.3390/machines10090731.
3. [3] A. Dianati, J. C. Widmer, B. Bilgin ve A. Emadi, “Hairpin winding in electric traction motors: A review,” Energies, c. 17, sy. 24, s. 6494, 2024, doi: https://doi.org/10.3390/en17246494.
4. [4] J.Y. Hwang, S.-J. Kim, Y.-J. Kim ve J.-P. Hong, “A review of stator winding technologies of electric motors for electric vehicles,” Journal of Electrical Engineering & Technology, c. 20, sy. 2, s. 757–776, 2025, doi: https://doi.org/10.1007/s42835-024-02148-7.
5. [5] P. L. Dowell, “Effects of eddy currents in transformer windings,” Proceedings of the Institution of Electrical Engineers, c. 113, sy. 8, s. 1387–1394, 1966, doi: https://doi.org/10.1049/piee.1966.0236.
6. [6] J. A. Ferreira, “Improved analytical modeling of conductive losses in magnetic components,” IEEE Transactions on Power Electronics, c. 9, sy. 1, s. 127–131, 1994, doi: https://doi.org/10.1109/63.285500.
7. [7] J. Pyrhönen, T. Jokinen ve V. Hrabovcová, Design of Rotating Electrical Machines, 2. bs. Chichester, U.K.: Wiley, 2014.
8. [8] Y. Li ve L. Parsa, “Design and analysis considerations for EV traction motors with hairpin winding,” SAE Technical Paper 2018-01-0438, 2018, doi: https://doi.org/10.4271/2018-01-0438.

9. [9] J. Zhang, B. Bilgin ve A. Emadi, “Investigation of AC loss reduction techniques in hairpin winding traction machines,” SAE Technical Paper 2020-01-1204, 2020, doi: https://doi.org/10.4271/2020-01-1204.
10. [10] A. M. El-Refaie, “Fractional-slot concentrated-windings synchronous permanent magnet machines: Opportunities and challenges,” IEEE Transactions on Industrial Electronics, c. 57, sy. 1, s. 107–121, 2010, doi: https://doi.org/10.1109/TIE.2009.2030210.