An Investigation on Profile Tension Measurement and Dynamic Load Analysis in Steel Roofs

Abstract

Whether new buildings are under construction, or the old building, bathhouse, social complex, etc. Static calculations in building systems and dynamic load analysis are carried out within the margin of error while creating roof systems, whether for the purpose of monitoring the structural behavior of buildings. Roof systems are created using one of many models. One of them is the finite element method. With this method, the distance between nodes from many nodes is measured and modeled. In our study, while creating a steel roof system in a structure of 10 floors 30.50 meters height, 23 * 22 meters width and length, 506 m2, as a result of physical calculations, load analysis, wind load, load combinations, steel frame calculations, equipment, torsion moments according to which parameters analysis was made as needed.

Keywords

• Steel Roof
• Finite Element Method
• Profile and Dynamic Loal Analysis

References

1. Chamber of Surveying and Cadastre Engineers, Engineering Measurements STB Commission 2. Engineering Measurements Symposium, 23-25 November 2005, ITU - Istanbul
2. Turkish standards institute, 498 TBDY, (2018). Turkish Building Earthquake Code, Ministry of Environment and Urbanization, Ankara
3. HE IS. Karagöz, H. Özbaşaran *, M. Doğan, H. Gonen, E. Ünlüoğlu, 6. SYMPOSIUM ON STEEL STRUCTURES, Reinforced Concrete Structure - Steel Cage roof Interaction: Earthquake Response, Eskişehir Osmangazi University, Engineering - Faculty of Architecture, Civil Engineering Department, 26480, Eskisehir / Turkey
4. Rüya Kılıç Demircan1 *, Pınar Sezin Öztürk Kardoğan2, Murat Pınarlık3, Osman Aytekin4, Analysis of Historical Şavşat Tibet Monastery with Finite Element Method, 2nd International Mediterranean Science and Engineering Congress (IMSEC 2017) Çukurova University, Congress Center, October 25-27, 2017, Adana / TURKEY Pages: 2049-2057, Paper ID: 918
5. Aslı ER AKAN, Determination of Bearing System Performance by Finite Element Analysis of Historical Wooden Column Mosques, SDU International Journal of Technologic Sciences, Vol. 2, No 1, February 2010, pp. 41-54
6. Vishal JAGOTA1, Aman Preet Singh SETHI2 and Khushmeet KUMAR1, Finite Element Method: An OverviewWALAILAK JOURNAL, Walailak J Sci & Tech 2013; 10 (1): 1-8. RW Clough. The finite element method in plane stress analysis. In: Proceedings of the 2nd ASCE Conference on Electronic Computation, Pittsburgh, 1960.
7. R Courant. Variational methods for the solutions of problems of equilibrium and vibrations. Bull. Am. Math. Soc. 1943; 49, 1-23. Url-1;https://www.elektrikport.com/teknik-kutuphane/sonlu-elemanlar-metodu-nedir-nerelerde-kullanilir/11661#ad-image-0