An investigation on rc high-rise structures with and without outriggers under lateral static loads

İbrahim Özgür Dedeoğlu; Yusuf Calayır; Bengi Arısoy

An investigation on rc high-rise structures with and without outriggers under lateral static loads

Abstract

Today, the need of high-rise structures is rising throughout the world day by day. The package programs used in the modelling and analyzing of high structures are being renewed and improved every day. However, analytical solutions are still to be very helpful in the preliminary design of the building model. In this study, the analytical solution approach has assessed for the horizontal displacement determinations of the shear wall-framed systems and shear wall-framed systems with outrigger systems under the static horizontal loads. For this purpose, two building models with 45 floors have been considered. The shear wall-framed system with outriggers has created by adding outrigger system to the shear wall -framed system in two levels. As the horizontal loads to the building models, the triangular distributed load representing the earthquake load and the uniformly distributed load representing the wind load have been applied. Displacement solutions of both models under horizontal loads have been performed using the analytical approach and ETABS program. The results of both models have been compared with each other and the validity of analytical solutions have been evaluated. Internal forces occurred in the both models under horizontal loads have been also assessed. The internal force solutions were obtained by using ETABS program. In addition, the effectiveness of the outrigger system has been examined.

Keywords

References

[1] Taranath, B. S., Reinforced Concrete Design of Tall Buildings, CRC Press, New York, 2010.
[2] Atımtay, E., Çerçeveli ve Perdeli Betonarme Sistemlerin Tasarımı: Temel Kavramlar ve Hesap Yöntemleri – Cilt I-II, METU Press, Ankara, 2001.
[3] Celep, Z., Deprem Mühendisliğine Giriş ve Depreme Dayanıklı Yapı Tasarımı, Beta Dağıtım, İstanbul, 2015.
[4] Nanduri, R. K., Suresh, B. and Hussein, Ihtesham., Optimum position of outrigger system for high-rise reinforced concrete buildings under wind and earthquake loadings. American Journal of Engineering Research, 2013, Volume-02, Issue-08, 76-89 pp.
[5] Nair, R. S., Belt trusses and basement as “virtual” outriggers for tall buildings. Engineering Journal, Four Quarter, American journal of steel construction, 1998.
[6] Taranath, B. S., Optimum belt truss location for high-rise structures, Engineering Journal, 1974, AISC 11:18-21 pp.
[7] Taranath, B. S. Optimum belt truss location for high-rise structures, Structural Engineer, 1975, 53, 345-347 pp.
[8] McNabb, J. B. and Muvdi, B.B., Drift reduction factors for belted high-rise structures, Engineering Journal, 1975, AISC 12: 88-91 pp

[9] McNabb, J. B. and Muvdi, B.B., Discussion: drift reduction factors for belted high-rise structures, Engineering Journal, 1977, AISC 14: 44-47 pp
[10] Smith, B. S. and Salim, I., Parameter study of out-rigger-braced tall building structures, Journal of Division, 1981, ASCE 107: 2001-2013
[11] Hoenderkamp, J. C. D. and Snijder, H. H. Simplified analysis of façade rigger braced high-rise structures. The Structural Design of Tall Buildings, 2000, 9: 309-319 pp.
[12] Hoenderkamp, J. C. D. and Bakker, M. C. B. Analysis of high-rise braced frames with outriggers. The Structural Design of Tall Buildings and Special Buildings, 2003, 12: 335-350.
[13] Hoenderkamp, J. C. D., Second outrigger at optimum location on high-rise shear-wall. The Structural Design of Tall Buildings and Special Buildings, 2008,17: 619-634.
[14] Kamath, K., Divya, N. and Rao, A. U., A Study on Static and Dynamic Behavior of Outrigger Structural System for Tall Buildings, Bonfring International Journal of Industrial Engineering and Management Science, 2012, Vol 2, No 4:15-20 pp
[15] Calayır, Y. and Dedeoğlu, İ.Ö., Earthquake Response of Reinforced Concrete Tall Building with Outriggers, 5. International Conference on Earthquake and Seismology, Anadolu University, Eskişehir/TURKEY, 2017, Proceeding No:3800.
[16] Tekeli, H., Control of Drift and Energy Dissipation in Earthquake Design, PhD Thesis, 2006, Süleyman Demirel University.
[17] Dedeoğlu, İ. Ö., Lateral Load Response of Reinforced Concrete High-Rise Buildings with Outrigger System, 2017, Ege University.
[18] Wu, J. R. and Li, Q. S., Structural Performance of multi-outrigger-braced tall buildings, The Structural Design of Tall Buildings and Special Buildings, 2003,12: 155-176 pp
[19] Smith, B. S. and Coull, A. Tall Building Structures Analysis and Design, 1991, John Wiley and Sons,
[20] Computer and Structures Incorporation, ETABS Integrated Analysis Design and Drafting of Building Systems, 2015, Berkeley, California, USA.

Details

Primary Language

English

Subjects

Engineering

Journal Section

Research Article

Authors

İbrahim Özgür Dedeoğlu This is me
0000-0001-5356-6655
Türkiye

Yusuf Calayır This is me
0000-0002-6387-5360
Türkiye

Bengi Arısoy This is me
0000-0002-2785-0609
Türkiye

Publication Date

March 27, 2020

Submission Date

May 30, 2019

Acceptance Date

March 17, 2020

Published in Issue

Year 2020 Volume: 38 Number: 1

IZ

https://izlik.org/JA65XM93DN

Cite

RIS / Bibtex

APA

Dedeoğlu, İ. Ö., Calayır, Y., & Arısoy, B. (2020). An investigation on rc high-rise structures with and without outriggers under lateral static loads. Sigma Journal of Engineering and Natural Sciences, 38(1), 191-211. https://izlik.org/JA65XM93DN

AMA

1.Dedeoğlu İÖ, Calayır Y, Arısoy B. An investigation on rc high-rise structures with and without outriggers under lateral static loads. SIGMA. 2020;38(1):191-211. https://izlik.org/JA65XM93DN

Chicago

Dedeoğlu, İbrahim Özgür, Yusuf Calayır, and Bengi Arısoy. 2020. “An Investigation on Rc High-Rise Structures With and Without Outriggers under Lateral Static Loads”. Sigma Journal of Engineering and Natural Sciences 38 (1): 191-211. https://izlik.org/JA65XM93DN.

EndNote

Dedeoğlu İÖ, Calayır Y, Arısoy B (March 1, 2020) An investigation on rc high-rise structures with and without outriggers under lateral static loads. Sigma Journal of Engineering and Natural Sciences 38 1 191–211.

IEEE

[1]İ. Ö. Dedeoğlu, Y. Calayır, and B. Arısoy, “An investigation on rc high-rise structures with and without outriggers under lateral static loads”, SIGMA, vol. 38, no. 1, pp. 191–211, Mar. 2020, [Online]. Available: https://izlik.org/JA65XM93DN

ISNAD

Dedeoğlu, İbrahim Özgür - Calayır, Yusuf - Arısoy, Bengi. “An Investigation on Rc High-Rise Structures With and Without Outriggers under Lateral Static Loads”. Sigma Journal of Engineering and Natural Sciences 38/1 (March 1, 2020): 191-211. https://izlik.org/JA65XM93DN.

JAMA

1.Dedeoğlu İÖ, Calayır Y, Arısoy B. An investigation on rc high-rise structures with and without outriggers under lateral static loads. SIGMA. 2020;38:191–211.

MLA

Dedeoğlu, İbrahim Özgür, et al. “An Investigation on Rc High-Rise Structures With and Without Outriggers under Lateral Static Loads”. Sigma Journal of Engineering and Natural Sciences, vol. 38, no. 1, Mar. 2020, pp. 191-1, https://izlik.org/JA65XM93DN.

Vancouver

1.İbrahim Özgür Dedeoğlu, Yusuf Calayır, Bengi Arısoy. An investigation on rc high-rise structures with and without outriggers under lateral static loads. SIGMA [Internet]. 2020 Mar. 1;38(1):191-21. Available from: https://izlik.org/JA65XM93DN