AN ASSIGNMENT BASED MODELLING APPROACH FOR THE INVENTORY ROUTING PROBLEM OF MATERIAL SUPPLY SYSTEMS OF THE ASSEMBLY LINES

Şule Itır Satoğlu; Aydın Sipahioğlu

AN ASSIGNMENT BASED MODELLING APPROACH FOR THE INVENTORY ROUTING PROBLEM OF MATERIAL SUPPLY SYSTEMS OF THE ASSEMBLY LINES

Abstract

The milk-run is an in-plant lean logistics application where from a central warehouse; full-boxes of components are supplied to the line-side buffer stock areas of the assembly stations, on a just-in time basis, and in a cyclic manner, so that the stations do not run out of stock [10]. The associated problem is the cyclic Inventory Routing Problem (IRP). In this study, a two stage approach is proposed where a mixed-integer mathematical model is solved to assign the stations to the routes and to decide the service periods of the routes. At the second stage, travelling salesman problem needs to be solved to find the sequence at each route. In addition, an alternative mixed-integer mathematical model is developed where routes are constructed such that the sequence of stations and the service periods are determined for each route, simultaneously. Both of the models are assignment-based that considerably reduces the solution times of the IRP. A medium-size hypothetical data set was solved by the two approaches. According to the results, the proposed two-stage approach was found to perform better than the alternative assignment-based model, in terms of computation time.

Keywords

References

[1] Adulyasak Y., Cordeau JF, Jans R, (2015). The production routing problem: A review of formulations and solution algorithms. Computers & Operations Research, 55, 141–152.
[2] Alnahhal M, Noche B, (2013). Efficient material flow in mixed model assembly lines. SpringerPlus, 2, 415-427.
[3] Andersson H., Hoff A, Christiansen M, Hasle G, Lokketangen A, (2010). Industrial aspects and literature survey: Combined inventory management and routing. Computers & Operations Research, 37, 1515–1536.
[4] Archetti C, Bertazzi L, Laporte G, Speranza MG (2007). A Branch-and-Cut Algorithm for a Vendor-Managed Inventory-Routing Problem. Transportation Science 41:382-391.
[5] Archetti C, Bertazzi L, Paletta G, Speranza MG , (2011). Analysis of the maximum level policy in a production-distribution system. Computers & Operations Research, 38, 1731–1746.
[6] Archetti C, Bianchessi N, Irnich S, Speranza MG, (2014). Formulations for an inventory routing problem. International Transactions in Operational Research, 21(3), 353-374.
[7] Bard JF, Nananukul N, (2010). A branch-and-price algorithm for an integrated production and inventory routing problem. Computers & Operations Research, 37, 2202–2217.
[8] Bertazzi L, Paletta G, Speranza MG, (2002). Deterministic Order-Up-To Level Policies in an Inventory Routing Problem, Transportation Science, 36(1), 119-132.

[9] Boysen N, Emde S, Hoeck M, Kauderer M, (2015). Part logistics in the automotive industry: Decision Problems, Literature Review and Research Agenda, European Journal of Operational Research, 242(1), 107-120.
[10] Bozer Y, Ciemnoczolowski, DD (2013). Performance evaluation of small-batch container delivery systems used in lean manufacturing – Part 1: system stability and distribution of container starts, International Journal of Production Research 51: 555–567.
[11] Campbell AM, Savelsbergh MWP (2004). A Decomposition Approach for the Inventory-Routing Problem, Transportation Science 38: 488-502.
[12] Caputo AC, Pelagagge PM, Salini P (2015). Planning models for continuous supply of parts in assembly systems. Assembly Automation, 35(1), 35-46.
[13] Chuah KH, Yingling JC (2005) Routing for a just-in-time supply pickup and delivery system. Transportation Science, 39:328–339.
[14] Coelho LC, Cordeau JF, Laporte G., (2013). Thirty Years of Inventory Routing-Transportation Science, 48(1), 1-19.
[15] Coelho, L.C., and Laporte, G., (2013). The exact solution of several classes of inventory-routing problems. Computers & Operations Research, 40, 558–565.
[16] Cordeau, JF, Lagana D, Musmanno R, Vocaturo F., (2015). A decomposition-based heuristic for the multiple-product inventory-routing problem. Computers & Operations Research, 55, 153–166.
[17] Darwish, M.A., and Odah O.M., (2010). Vendor managed inventory model for single-vendor multi-retailer supply chains, European Journal of Operational Research, 204, 473-484.
[18] Desrochers, M. Laporte, G., (1991). Improvements and extensions to the Miller–Tucker–Zemlin subtour elimination constraints, Operations Research Letters, 10, 27–36.
[19] Emde S, Boysen N (2012). Optimally routing and scheduling tow trains for JIT supply of mixed-model assembly lines. European Journal of Operational Research, 217:287–299
[20] Gallego, G., Simchi-Levi, D, (1990). On the Effectiveness of Direct Shipping Strategy for One Warehouse Multi-Retailer R-Systems. Management Science. 36, 240-243.
[21] Gaur V., Fisher, M.L., (2004). A Periodic Inventory Routing Problem at a Supermarket Chain. Operations Research, 52, 6, 813-822.
[22] Kilic HS, Durmusoglu MB, (2015). Advances in assembly line parts feeding policies: a literature review. Assembly Automation, 35(1), 57 – 68.
[23] Li, J., Chu, F., Chen, H., (2011). A solution approach to the inventory routing problem in a three-level distribution system, European Journal of Operational Research, 210, 736-744.
[24] Ohlman JW, Fry MJ, Thomas BW (2008) Route design for lean production systems. Transportation Science, 42:352–370.
[25] Raa B, Aghezzaf EH (2009). A practical solution approach for the cyclic inventory routing problem, European Journal of Operational Research, 192: 429-441.
[26] Satoglu SI, Sahin IE (2013). Design of a just-in-time periodic material supply system for the assembly lines and an application in electronics industry, International Journal of Advanced Manuf acturing Technology, 65:319-332.
[27] Satoglu SI, Aslangul T (2014). An Integrated Methodology for Order Dispatching to Distributors. XII. International Logistics and Supply Chain Congress, October 30-31 2014, Istanbul, Turkey.
[28] Vaidyanathan BS, Matson JO, Miller DM, Matsona JE (1999). A capacitated vehicle routing problem for just-in-time delivery. IIE Transactions 31:1083–1092.
[29] Yildiz H, Ravi R, and Fairey W (2010) Integrated optimization of customer and supplier logistics at Robert Bosch LLC, European Journal of Operational Research, 207, Issue 2, 456-464.
[30] Alnahhal, M., Noche, B., (2015). Dynamic material flow control in mixed model assembly lines. Computers & Industrial Engineering, 85, 110-119
[31] Zammori, F., Braglia, M., & Castellano, D. (2015). Just-in-time parts feeding policies for paced assembly lines: possible solutions for highly constrained layouts. International Transactions in Operational Research, 23(4), 691-724.
[32] Aghezzaf, EH , Zhong, YQ , Raa, B , Mateo, M, (2012). Analysis of the single-vehicle cyclic inventory routing problem, International Journal of Systems Science, 43(11), 2040-2049.
[33] Aghezzaf, E.H., Raa, B., Landeghem, H.V., (2006). Modeling inventory routing problems in supply chains of high consumption products, European Journal of Operational Research, 169(3), 1048-1063.
[34] Hanson, R., Finnsgård, C. (2014). Impact of unit load size on in-plant materials supply efficiency. International Journal of Production Economics, 147, 46-52.
[35] Alnahhal, M., & Noche, B. (2015). Dynamic material flow control in mixed model assembly lines. Computers & Industrial Engineering, 85, 110-119.
[36] Klenk, E., Galka, S., & Günthner, W. A. (2015). Operating strategies for in-plant milk-run systems. IFAC-PapersOnLine, 48(3), 1882-1887.
[37] Satoglu, S. I., & Ucan, K. (2015). Redesigning the material supply system of the automotive suppliers based on lean principles and an application. In Industrial Engineering and Operations Management (IEOM), 2015 International Conference on (pp. 1-6). IEEE.

Details

Primary Language

English

Subjects

Engineering

Journal Section

Research Article

Authors

Şule Itır Satoğlu This is me
0000-0003-2768-4038
Türkiye

Aydın Sipahioğlu This is me
0000-0001-8743-2911
Türkiye

Publication Date

March 1, 2018

Submission Date

November 10, 2016

Acceptance Date

November 8, 2017

Published in Issue

Year 2018 Volume: 36 Number: 1

IZ

https://izlik.org/JA97RW78MP

Cite

RIS / Bibtex

APA

Satoğlu, Ş. I., & Sipahioğlu, A. (2018). AN ASSIGNMENT BASED MODELLING APPROACH FOR THE INVENTORY ROUTING PROBLEM OF MATERIAL SUPPLY SYSTEMS OF THE ASSEMBLY LINES. Sigma Journal of Engineering and Natural Sciences, 36(1), 161-177. https://izlik.org/JA97RW78MP

AMA

1.Satoğlu ŞI, Sipahioğlu A. AN ASSIGNMENT BASED MODELLING APPROACH FOR THE INVENTORY ROUTING PROBLEM OF MATERIAL SUPPLY SYSTEMS OF THE ASSEMBLY LINES. SIGMA. 2018;36(1):161-177. https://izlik.org/JA97RW78MP

Chicago

Satoğlu, Şule Itır, and Aydın Sipahioğlu. 2018. “AN ASSIGNMENT BASED MODELLING APPROACH FOR THE INVENTORY ROUTING PROBLEM OF MATERIAL SUPPLY SYSTEMS OF THE ASSEMBLY LINES”. Sigma Journal of Engineering and Natural Sciences 36 (1): 161-77. https://izlik.org/JA97RW78MP.

EndNote

Satoğlu ŞI, Sipahioğlu A (March 1, 2018) AN ASSIGNMENT BASED MODELLING APPROACH FOR THE INVENTORY ROUTING PROBLEM OF MATERIAL SUPPLY SYSTEMS OF THE ASSEMBLY LINES. Sigma Journal of Engineering and Natural Sciences 36 1 161–177.

IEEE

[1]Ş. I. Satoğlu and A. Sipahioğlu, “AN ASSIGNMENT BASED MODELLING APPROACH FOR THE INVENTORY ROUTING PROBLEM OF MATERIAL SUPPLY SYSTEMS OF THE ASSEMBLY LINES”, SIGMA, vol. 36, no. 1, pp. 161–177, Mar. 2018, [Online]. Available: https://izlik.org/JA97RW78MP

ISNAD

Satoğlu, Şule Itır - Sipahioğlu, Aydın. “AN ASSIGNMENT BASED MODELLING APPROACH FOR THE INVENTORY ROUTING PROBLEM OF MATERIAL SUPPLY SYSTEMS OF THE ASSEMBLY LINES”. Sigma Journal of Engineering and Natural Sciences 36/1 (March 1, 2018): 161-177. https://izlik.org/JA97RW78MP.

JAMA

1.Satoğlu ŞI, Sipahioğlu A. AN ASSIGNMENT BASED MODELLING APPROACH FOR THE INVENTORY ROUTING PROBLEM OF MATERIAL SUPPLY SYSTEMS OF THE ASSEMBLY LINES. SIGMA. 2018;36:161–177.

MLA

Satoğlu, Şule Itır, and Aydın Sipahioğlu. “AN ASSIGNMENT BASED MODELLING APPROACH FOR THE INVENTORY ROUTING PROBLEM OF MATERIAL SUPPLY SYSTEMS OF THE ASSEMBLY LINES”. Sigma Journal of Engineering and Natural Sciences, vol. 36, no. 1, Mar. 2018, pp. 161-77, https://izlik.org/JA97RW78MP.

Vancouver

1.Şule Itır Satoğlu, Aydın Sipahioğlu. AN ASSIGNMENT BASED MODELLING APPROACH FOR THE INVENTORY ROUTING PROBLEM OF MATERIAL SUPPLY SYSTEMS OF THE ASSEMBLY LINES. SIGMA [Internet]. 2018 Mar. 1;36(1):161-77. Available from: https://izlik.org/JA97RW78MP