Ultra Yüksek Performanslı Lifli Beton İçeren Kirişlerin Eğilme Davranışı

Kaan Türker; Tamer Birol; Altuğ Yavaş; Umut Hasgül; Halit Yazıcı

doi:10.18400/tekderg.287116

Ultra Yüksek Performanslı Lifli Beton İçeren Kirişlerin Eğilme Davranışı

Abstract

Çalışmada, betonarme kirişlerde Ultra Yüksek Perfromanslı Lifli Beton (UYPLB) kullanımının, kiriş sünekliği, taşıma kapasitesi, eğilme rijitliği, kırılma şekilleri ve çatlak davranışı üzerindeki etkileri deneysel olarak incelenmiştir. Bunun için dikdörtgen enkesitli 150x250x2500mm boyutlarında test kirişleri kullanılmıştır. Beton içeriğinde düz mikro ve kancalı makro boyutta çelik lifler karma olarak kullanılmış ve ortalama 161 MPa’lık basınç dayanımı elde edilmiştir. Düşük ve yüksek dört farklı çekme donatısı oranına sahip lifli ve lifsiz toplam dokuz adet betonarme test kirişi üzerinde dört noktalı eğilme testleri gerçekleştirilmiş ve salt eğilme davranışları incelenmiştir. Çalışmadan elde edilen sonuçlar, kirişlerde UYPLB kullanımının incelenen parametreler bakımından önemli avantajlar sağladığını göstermiştir.

Keywords

betonarme kiriş,lifli beton

References

[1] Wille, K., Naaman, A. E. Ve Parra-Montesinos, G. J., (2011). Ultra-high performance Concrete with compressive strength exceeding 150 Mpa (22 ksi): a simpler way, ACI Materials Journal, 108, 1, 46–54.
[2] Wille, K., Naaman, A. E., El-Tawil, S. Ve Parra-Montesinos, G. J., (2012). Ultra-high performance concrete and fiber reinforced concrete: achieving strength and ductility without heat curing, Materials and Structures, 45, 309-324.
[3] Wang, C., Yang, C., Liu, F., Wan, C. Ve Pu, X., (2012). Preparation of Ultra-High Performance Concrete with common technology and materials, Cement and Concrete Composites, 34, 538-544.
[4] Yazıcı, H., Yardımcı, M. Y., Aydın, S. Ve Karabulut, A. S., (2009). Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes, Construction and Building Materials; 23,1223–31.
[5] Yudenfreund, M., Skalny, J., Mikhail, R.S. ve Brunauer, S., (1972). Hardened portland cement pastes of low porosity, II. Exploratory studies. Dimensional changes, Cement and Concrete Research, 2 (3), 331–348.
[6] Roy, D. M., Gouda, G.R. ve Bobrowsky, A., (1972). Very high strength cement pastes prepared by hot pressing and other high pressure techniques, Cement and Concrete Research, 2, 349–366.
[7] Bache, H. H. (1981). Densified cement/ultrafine particle-based materials, 2nd int. Conference on superplasticizers in concrete, Ottawa, 10–12 June.
[8] Richard, P. And Cheyrezy, M., (1995). Composition of reactive powder concretes, Cement and Concrete Research, 25 (7), 1501–1511.

[9] AFGC, (2013). Recommendation: Ultra high performance fibre-reinforced concretes, revised ed. Association Française de Génie Civil; Service d’études techniques des routes et autoroutes.
[10] Fehling, E., Schmidt, M., Walraven, J., Leutbecher, T. Ve Frönlich, S., (2014). Ultra-High Performance Concrete UHPC, Betonkalender, Wilhelm Ernst & Sohn.
[11] JSCE, (2008). Recommendations for Design and Construction of High Performance Fiber Reinforced Cement Composites with Multiple Fine Cracks, Concrete Engineering Series, 82, Japan Society of Civil Engineers.
[12] Russell, H. G. Ve Graybeal, B. A., (2013). Ultra-High Performance Concrete: A State-of-the-Art Report roject Bridge Community, FHWA Publication HRT-13-060. Federal Highway Administration.
[13] Gowripalan, N., ve Gilbert, I. (2000). Design Guidelines for Ductal Prestressed Concrete Beams, VSL Australia.
[14] Naaman, A. E. (2007). High performance fiber reinforced cement composites classification and applications, CBM–C1 International workshop, Karachi, Pakistan, 389–400.
[15] Taşdemir, M. A. ve Bayromov, F., (2002). Yüksek performanslı çimento esaslı kompozitlerin mekanik davranışı, itüdergisi/d, mühendislik serisi, 1, 2, 125-144.
[16] SAMARIS, (2005). Report D22, Full scale application of UHPFRC roject rehabilitation of bridges – from the lab to the field, European roject 5th FWP / SAMARIS – Sustainable and Advanced Materials for Road Infrastructures – WP 14: HPFRCC.
[17] Moreillon, L. Ve Menétrey, P., (2013). Rehabilitation and Strengthening of Existing RC Structures with UHPFRC: Various Application, RILEM-fib-AFGC Int. Symposium on Ultra-High Performance Fibre-Reinforced Concrete, France, RILEM Publication S. A. R. L,127-136.
[18] Wang, Y. C. Ve Lee, M. G., (2007). Ultra–high strength steel fiber reinforced concrete for strengthening of RC frames, Journal of Marine Science and Technology, 15 (3), 210–218.
[19] Tayeh, B. A., Bakar, B. H. A., Johari, M. A. M. ve Voo, Y. L., (2013). Utilization of ultra–high performance fibre concrete (UHPFC) for rehabilitation – A review, Procedia Engineering, 54, 525–538.
[20] Guan, Q., Zhang, P., Xie, X., (2013). Flexural behavior of steel fiber reinforced high-strength concrete beams, Research Journal of Applied Sciences, Engineering and Technology, 6, 1, 1-6.
[21] Yang, I., Joh, C., Kim, B., (2010). Structural behavior of ultra high performance concrete beams subjected to bending, Engineering Structures, 32, 3478-3487.
[22] Khalil, W. I., Tayfur, Y. R., (2013). Flexural strength of fibrous ultra high performance reinforced concrete beams, ARPN Journal of Engineering and Applied Sciences, 8, 3, 200-214.
[23] Stürwald, S., Fehling, E., (2012). Design of reinforced UHPFRC in flexure, 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Kassel University Press, Germany, 403-410.
[24] Dancygier, A. N. Ve Savir, Z., (2006). Flexural behavior of HSFRC with low reinforcement ratios, Engineering Structures, 28, 1503–1512.
[25] Türker, K., Birol, T., Yavaş, A., Hasgül, U. (2016). Ultra Yüksek Performanslı Lifli Beton İçeren Kirişlerde Etkin Çelik Lif Tipi İncelemesi, Afyon Kocatepe Ü. Fen ve Mühensilik Bilimleri Dergisi, 16, 776-785.
[26] Ashour, S. A. ve Wafa, F. F. (1993). Flexural behavior of high-strength fiber reinforced concrete beams, ACI Structural Journal, 90, 3, 279-287.
[27] Yoo, D. Y. Ve Yoon, Y. S., (2015). Structural performance of ultra-high-performance concrete beams with different steel fibers, Engineering Structures, 102, 409-423.
[28] Bertram, G. Ve Hegger, J. (2008). Shear carrying capacity of Ultra-High Performance Concrete beams, Proceedings, 8th International Symposium on Utilization of High-Strength and High-Performance Concrete, Tokyo, Japan.
[29] Voo, Y. L., Poon, W. K. Ve Foster, S. J., (2010). Shear strength of steel fiber-reinforced ultra-high performance concrete beams without stirrups, Journal of Structural Engineering, 136, 11, 1393–1400.
[30] Sudheer Reedy, L., Ramana Rua, N. V., Gunneswara Rao, T. D., Shear resistance of high strength concrete beams without shear reinforcement, International Journal of Civil and Structural Engineering, 1, 1, 101-113, 2010.
[31] ACI 318-14, Building code requirements for structural concrete and commentary, ACI Standard, American Concrete Institute, 2014.
[32] Sivakamur, A., Santhanam, M. Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibres, Cement and Concrete Composites, 29, 603-608, 2007.
[33] Yoo, D. Y., Lee, J. H., Yoon, Y. S. Effect of fiber content on mechanical and fracture properties of ultra high performance fiber reinforced cementitious composites, Composite Structures, 106, 742-753, 2013.
[34] Marković, I., High-performance hybrid-fibre concrete-development and utilization, Ph.D. Dissertation, Delft University of Technology, 2006.
[35] Kim, D. J., Park, S. H., Ryu, G. S., Koh, K. T., Comparative flexural behavior of hybrid ultra high performance fiber reinforced concrete with different macro fibers, Construction and Building Materials, 25, 4144-4155, 2011.
[36] Rossi, P., Arca, A., Parant, E., Fakhri, P., Bending and compressive behaviors of a new cement composite, Cement and Concrete Research, 35, 1, 27-33, 2005.
[37] Birol, T. Ultra yüksek performanslı lifli beton ile üretilen betonarme kirişlerin eğilme davranışının incelenmesi, Doktora Tezi, Balıkesir Üniversitesi, Fen Bilimleri Enstitüsü, Balıkesir, 2016.
[38] Türk Standartları Enstitüsü, TS500: Betonarme yapıların tasarım ve yapım kuralları, Bakanlıklar, Ankara, 2000.
[39] Park, R., Evaluation of ductility of structures and structural assemblages from laboratory testing, Bulletin of the New Zealand National Society for the Earthquake Engineering, 22, 3, 155-166, 1989.
[40] Park, R., Ruitong, D., Ductility of doubly reinforced concrete beam sections, ACI Structural Journal, 85, 2, 217-225, 1988.
[41] Rashid, M. A., Mansur, M. A., Reinforced high-strenght beams in flexure, ACI Structural Journal, 84, 4, 330-341, 2005.

Details

Primary Language

Turkish

Subjects

Engineering

Journal Section

Research Article

Authors

Kaan Türker
Balıkesir Üniversitesi, Balıkesir, Türkiye
Türkiye

Tamer Birol
Balıkesir Üniversitesi, Balıkesir, Türkiye
Türkiye

Altuğ Yavaş This is me
Balıkesir Üniversitesi, Balıkesir, Türkiye
Türkiye

Umut Hasgül
Balıkesir Üniversitesi, Balıkesir, Türkiye
Türkiye

Halit Yazıcı
DOKUZ EYLÜL ÜNİVERSİTESİ
Türkiye

Publication Date

January 1, 2019

Submission Date

January 24, 2017

Acceptance Date

March 16, 2018

Published in Issue

Year 2019 Volume: 30 Number: 1

DOI

https://doi.org/10.18400/tekderg.287116

IZ

https://izlik.org/JA35RC27LC

Cite

RIS / Bibtex

APA

Türker, K., Birol, T., Yavaş, A., Hasgül, U., & Yazıcı, H. (2019). Ultra Yüksek Performanslı Lifli Beton İçeren Kirişlerin Eğilme Davranışı. Teknik Dergi, 30(1), 8777-8801. https://doi.org/10.18400/tekderg.287116

AMA

1.Türker K, Birol T, Yavaş A, Hasgül U, Yazıcı H. Ultra Yüksek Performanslı Lifli Beton İçeren Kirişlerin Eğilme Davranışı. Teknik Dergi. 2019;30(1):8777-8801. doi:10.18400/tekderg.287116

Chicago

Türker, Kaan, Tamer Birol, Altuğ Yavaş, Umut Hasgül, and Halit Yazıcı. 2019. “Ultra Yüksek Performanslı Lifli Beton İçeren Kirişlerin Eğilme Davranışı”. Teknik Dergi 30 (1): 8777-8801. https://doi.org/10.18400/tekderg.287116.

EndNote

Türker K, Birol T, Yavaş A, Hasgül U, Yazıcı H (January 1, 2019) Ultra Yüksek Performanslı Lifli Beton İçeren Kirişlerin Eğilme Davranışı. Teknik Dergi 30 1 8777–8801.

IEEE

[1]K. Türker, T. Birol, A. Yavaş, U. Hasgül, and H. Yazıcı, “Ultra Yüksek Performanslı Lifli Beton İçeren Kirişlerin Eğilme Davranışı”, Teknik Dergi, vol. 30, no. 1, pp. 8777–8801, Jan. 2019, doi: 10.18400/tekderg.287116.

ISNAD

Türker, Kaan - Birol, Tamer - Yavaş, Altuğ - Hasgül, Umut - Yazıcı, Halit. “Ultra Yüksek Performanslı Lifli Beton İçeren Kirişlerin Eğilme Davranışı”. Teknik Dergi 30/1 (January 1, 2019): 8777-8801. https://doi.org/10.18400/tekderg.287116.

JAMA

1.Türker K, Birol T, Yavaş A, Hasgül U, Yazıcı H. Ultra Yüksek Performanslı Lifli Beton İçeren Kirişlerin Eğilme Davranışı. Teknik Dergi. 2019;30:8777–8801.

MLA

Türker, Kaan, et al. “Ultra Yüksek Performanslı Lifli Beton İçeren Kirişlerin Eğilme Davranışı”. Teknik Dergi, vol. 30, no. 1, Jan. 2019, pp. 8777-01, doi:10.18400/tekderg.287116.

Vancouver

1.Kaan Türker, Tamer Birol, Altuğ Yavaş, Umut Hasgül, Halit Yazıcı. Ultra Yüksek Performanslı Lifli Beton İçeren Kirişlerin Eğilme Davranışı. Teknik Dergi. 2019 Jan. 1;30(1):8777-801. doi:10.18400/tekderg.287116

Cited By

Farklı Kalınlıkta UYPB Laminelerin Eğilme Kapasitesine Katkısının İncelenmesi

Deu Muhendislik Fakultesi Fen ve Muhendislik

https://doi.org/10.21205/deufmd.2019216329

Flexural Experiments on B58 Type Railway Sleepers with Different Dosages of Steel Fibers

Turkish Journal of Civil Engineering

https://doi.org/10.18400/tjce.1394166

Machine and deep learning-based prediction of flexural moment capacity of ultra-high performance concrete beams with/out steel fiber

Asian Journal of Civil Engineering

https://doi.org/10.1007/s42107-024-01064-2

Optimization of Mechanical Properties of Mixed Fiber Concrete by Taguchi Method: Impact, Compressive and Flexural Strength

Turkish Journal of Civil Engineering

https://doi.org/10.18400/tjce.1525770