Research Article

A Study Depending on the Probabilistic Seismic Hazard Analyses for Design Spectrum Parameters

Volume: 28 Number: 4 October 1, 2017
EN TR

A Study Depending on the Probabilistic Seismic Hazard Analyses for Design Spectrum Parameters

Abstract

Within the scope of this study, design spectrum parameters (constant acceleration region corner periods and site factors) are proposed, depending on probabilistic seismic hazard analyses conducted in a region located in a part of the North Anatolian Fault Zone. The outcomes are obtained for different site conditions and return periods. Two different seismic source models which are areal source, and fault and gridded seismic source models are used for probabilistic seismic hazard analyses. The ground-motion characterization is handled by selecting the ground-motion prediction equations that reflect well the seismic excitations around the study region. The computation of constant acceleration region corner periods and site factors are based on the empirical relationships that depend on the PGA or spectral accelerations at T = 0.2 s and 1.0 s for rock sites.

Keywords

References

  1. Deprem Bölgelerinde Yapılacak Binalar Hakkında Yönetmelik (DBYBHY), T.C. Bayındırlık ve İskan Bakanlığı, Afet İşleri Genel Müdürlüğü, Deprem Araştırma Dairesi, http://www.deprem.gov.tr, Ankara, 2007.
  2. CEN, Eurocode 8: Design of structures for earthquake Resistance - Part 1: General rules, seismic actions, and rules for buildings, EN 1998-1:2004, Comité Européen de Normalisation, Brussels, 2004.
  3. Building Seismic Safety Council (BSSC), NEHRP Recommended Seismic Provisions For New Buildings and Other Structures: Part 1, Provisions, Federal Emergency Management Agency (FEMA-P-1050-1), Washington, D.C., 2015.
  4. Newmark, N. M., Hall, W. J., Earthquake spectra and design, Earthquake Engineering Research Institute, Berkeley, California, 1982.
  5. Rey, J., Faccioli, E., Bommer, J. J., Derivation of design soil coefficients (S) and response spectel shapes for Eurocode 8 using the European Strong-Motion Database, Journal of Seismology, 6, 547-555, 2002.
  6. Kalkan, E., Gülkan, P., Site-Dependent Spectra Derived from Ground Motion Records in Turkey, Earthquake Spectra, 20, 1111-1138, 2004.
  7. Pitilakis, K., Riga, E., Anastasiadis, A., Design spectra and amplification factors for Eurocode 8, Bulletin of Earthquake Engineering, 10, 1377-1400, 2012.
  8. Giardini, D., Woessner, J., Danciu, L., Mapping Europe’s Seismic Hazard, EOS 95, 261-262, 2014.

Details

Primary Language

Turkish

Subjects

Engineering

Journal Section

Research Article

Authors

Özkan Kale
TED ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ, İNŞAAT MÜHENDİSLİĞİ BÖLÜMÜ
0000-0003-3997-4008
Türkiye

Publication Date

October 1, 2017

Submission Date

July 31, 2017

Acceptance Date

August 9, 2017

Published in Issue

Year 2017 Volume: 28 Number: 4

APA
Kale, Ö. (2017). Tasarım Spektrumu Parametreleri için Olasılıksal Sismik Tehlike Analizlerine Bağlı Bir Çalışma. Teknik Dergi, 28(4), 8077-8103. https://doi.org/10.18400/tekderg.331837
AMA
1.Kale Ö. Tasarım Spektrumu Parametreleri için Olasılıksal Sismik Tehlike Analizlerine Bağlı Bir Çalışma. Teknik Dergi. 2017;28(4):8077-8103. doi:10.18400/tekderg.331837
Chicago
Kale, Özkan. 2017. “Tasarım Spektrumu Parametreleri Için Olasılıksal Sismik Tehlike Analizlerine Bağlı Bir Çalışma”. Teknik Dergi 28 (4): 8077-8103. https://doi.org/10.18400/tekderg.331837.
EndNote
Kale Ö (October 1, 2017) Tasarım Spektrumu Parametreleri için Olasılıksal Sismik Tehlike Analizlerine Bağlı Bir Çalışma. Teknik Dergi 28 4 8077–8103.
IEEE
[1]Ö. Kale, “Tasarım Spektrumu Parametreleri için Olasılıksal Sismik Tehlike Analizlerine Bağlı Bir Çalışma”, Teknik Dergi, vol. 28, no. 4, pp. 8077–8103, Oct. 2017, doi: 10.18400/tekderg.331837.
ISNAD
Kale, Özkan. “Tasarım Spektrumu Parametreleri Için Olasılıksal Sismik Tehlike Analizlerine Bağlı Bir Çalışma”. Teknik Dergi 28/4 (October 1, 2017): 8077-8103. https://doi.org/10.18400/tekderg.331837.
JAMA
1.Kale Ö. Tasarım Spektrumu Parametreleri için Olasılıksal Sismik Tehlike Analizlerine Bağlı Bir Çalışma. Teknik Dergi. 2017;28:8077–8103.
MLA
Kale, Özkan. “Tasarım Spektrumu Parametreleri Için Olasılıksal Sismik Tehlike Analizlerine Bağlı Bir Çalışma”. Teknik Dergi, vol. 28, no. 4, Oct. 2017, pp. 8077-03, doi:10.18400/tekderg.331837.
Vancouver
1.Özkan Kale. Tasarım Spektrumu Parametreleri için Olasılıksal Sismik Tehlike Analizlerine Bağlı Bir Çalışma. Teknik Dergi. 2017 Oct. 1;28(4):8077-103. doi:10.18400/tekderg.331837

Cited By