Baret Kazıklı Radye Temellerin Üç Boyutlu Sonlu Elemanlar Analizi

Halil Murat Alğın; Arda Burak Ekmen; Levent Yenmez

doi:10.18400/tekderg.399679

Baret Kazıklı Radye Temellerin Üç Boyutlu Sonlu Elemanlar Analizi

Abstract

Yüksek katlı yapı temellerinde kullanılan baret kazıklı radye sistemlerinin oturma analizlerinin yapılması, geoteknik mühendisliği açısından yeni bir bilimsel mücadele alanı olmuştur. Bu temel sistemlerinin sayısal üç boyutlu modellerinin görüntü işleme tekniğiyle daha gerçekçi olarak yapılabildiğini göstermek amacıyla, Viyana'daki Avrupa’nın en uzun gökdelenlerinden biri olan DC kulelerinin temel sistemleri ayrıntılı bir şekilde modellenmiş ve kulelerin birbirlerine etkisi incelenmiştir. Bu araştırma kapsamında geliştirilen üç boyutlu sonlu elemanlar (3B SE) modelleri sayesinde, geoteknik mühendisliğinde önemli bir temel çeşidi olan baret kazıklı radyelerin oturma analizleri, komşu kazık sistemiyle birlikte analiz edilerek ölçüm sonuçlarıyla kıyaslanmıştır. Bu bildiride sunulan analizler sayesinde, literatürde daha önce sunulan 3B SE analizi geliştirilerek oturma analizlerinin daha hassas olarak ileri bir modelleme tekniği ile yapılabileceği açıklanmıştır.

Keywords

Baret kazıklı radye,Görüntü işleme,Sonlu elemanlar analizi,Üç boyutlu modelleme,Oturma analizi

References

Tamaro, G., Perimeter Wall for New World Center, J. Constr. Eng. Manage., 107(2), 193–207, 1981.
Ramaswamy, S. D., Pertusier, E. M., Construction of Barrettes for High-Rise Foundations, J. Constr. Eng. Manage., 112(4), 455–462, 1986.
Pratt, M., Sims, M. J., The Application of New Techniques to Solve Deep Basement and Foundation Problems, Int. Conf. on Deep Foundation Practice, Singapore, 1990.
Ann, T. S., Fellenius, B. H., Failure of a Barrette As Revealed in an O-cell Test, GeoCongress ASCE, Oakland, California, USA, 307-321, 2012.
Thasnanipan, N., Maung, A. W., Baskaran, G., Diaphragm Wall and Barrette Construction for Thiam Ruam Mit Station Box, MTR Chaloem Ratchamongkhon Line, Bangkok, Int. Conf. on Geotechnical and Geologic Engineering, GeoEng 2000, Melbourne, Australia, 2000.
Kienberger, H., Diaphragm Walls as Load Bearing Foundations, Diaphragm walls and anchorages, Institution of Civil Engineers, London, 19–21, 1975.
Baker, C. N., Azam, I., Joseph, L. S., Settlement Analysis for 450 Meter Tall KLCC Towers, In Vertical and Horizontal Deformations of Foundations and Embankments, ASCE, 1650-1671, 1994.
Martak, L., Mayerhofer, A.F., Tschuchnigg, F., Vorwagner, A., Bahnhof Wien Mitte – Ein zentrales Infrastrukturprojekt im Herzen Wiens, Proc. 23th Christian Veder Kolloquium, Graz, 2007.

Ng, C. W. W., Lei G. H., Performance of Long Rectangular Barrettes in Granitic Saprolites, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 129(8), 685-696, 2003.
Geotechnical Engineering Office (GEO)., Pile Design and Construction, GEO Publication No. 1/96, Civil Engineering Dept., Hong Kong Government, Hong Kong, 1996.
Powrie, W., E. S. F. Li., Finite Element Analyses of an In Situ Wall Propped at Formation Level, Geotechnique, 41(4), 499-514, 1991.
Gunn M. J., Satkunananthan, A., Clayton, C. R. I., Finite Element Modelling of Installation Effects, Retaining Structures, 46-55, 1993.
Moran, J., Laimbeer, A., Behaviour During Construction of a Cantilever Diaphragm Wall in Stiff Clay at Limehouse Link, TRL Project Report 73, Transport Research Laboratory of the Department of Transport, Crowthorne, Berkshire, UK, 1994.
Ng, C. W. W., An Evaluation of Soil-Structure Interaction Associated with a Multi-Propped Excavation, PhD thesis, University of Bristol, U.K., 1992.
Lings, M. L., Ng, C. W. W., Nash, D. F. T., The Lateral Pressure of Wet Concrete Diaphragm Wall Panels Cast Under Bentonite, Proc. Instn. Civ. Engrs, Geotech. Eng., 107(3), 163-172, 1994.
Ng, C. W. W., Yan, R. W. M., Stress Tranfer and Deformation Mechanisms Around A Diaphragm Wall Panel, J. Geotech. And Geoenviron. Engng., ASCE, 124(7), 638-648, 1998.
Ng, C. W. W., Yan R. W. M., Three-Dimensional Modelling of a Diaphram Wall Construction Sequance, Geotechnique, 49(6), 825-834, 1999.
Ng, C. W. W., Lings, M. L., Simpson B., Nash, D. F. T., An Approximate Analysis of the Three-Dimentional Effects of Diaphram Wall Installation, Geotechnique, 45(3), 497-507, 1995.
Gourvenec, S. M., Powrie, W.,Three-Dimentional Finite Element Analysis of Diaphragm Wall Installation, Geotechnique, 49(6), 801-823, 1999.
Fellenius, B. H., Altaee, A., Kulesza, R., Hayes, J., O-Cell Testing and FE Analysis of 28-m-Deep Barrette in Manila, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 125(7), 566-575, 1999.
Lei, G., Behaviour of Excavated Rectangular Piles (Barrettes) in Granitic Saprolites, PhD Thesis, Dept. of Civil Eng. Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, 2001.
Zhang, L. M., Behavior of Laterally Loaded Large-Section Barrettes, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 129(7), 639-648, 2003.
Seo, H., Basu, D., Prezzi, M., Salgado, R., Load-Settlement Response of Rectangular and Circular Piles in Multilayered Soil, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 135(3), 420-430, 2009.
Adam, D., Markiewicz, R., Donau City Tower 1 – Deep Foundation, Excavation and Dewaterings Cheme for the 220 M Tall High-Rise Building in Vienna,Vplyv vody na geotechnic konštrukcie, Bratislava, 25(12), 2013.
Tschuchnigg, F., Schweiger, H. F., Comparison of Deep Foundation Systems using 3D Finite Element Analysis Employing Different Modeling Techniques, Geotechnical Engineering Journal of the SEAGS & AGSSEA, 44(3), 40-46, 2013.
Tschuchnigg, F., Schweiger, H. F., Study of a Complex Deep Foundation System Using 3D Finite Element Analysis, Numerical Methods in Geotechnical Engineering (NUMGE 2010), London, 2010.
Tschuchnigg, F., Schweiger, H. F., Comparison of Deep Foundation Systems Using 3D Finite Element Analysis, Proc. of IACMAG, Melbourne, Australia, 2011.
Algin, H. M., Optimised Design of Jet-Grouted Raft Using Response Surface Method, Computers and Geotechnics, 74, 56–73, 2016.
Algin, H. M., Optimised Design of Jet-Grouted Rafts Subjected to Nonuniform Vertical Loading, Korean Society of Civil Engineers (KSCE), 22(2), 494-508, 2017.
Algin, H. M., Gumus, V., 3D FE Analysis on Settlement of Footing Supported with Rammed Aggregate Pier Group, International Journal of Geomechanics, American Society of Civil Engineers (ASCE), 18(8), 1-18, 2018.
Matlab (2017). Matlab, version R2017a, MathWorks.
Abaqus (2012). Abaqus, version 6.12, Dassault Systèmes, USA.
Hamderi, M., Comprehensive Group Pile Settlement Formula Based on 3D Finite Element Analyses, Soils and Foundations , 58(1), 1-15, 2018.
BS-EN-1994-1. Eurocode 7. ,Geotechnical Design,, Brussels, Belgium: European Committee for Standardization, 2004.
Reul, O., Randolph, MF., Design Strategies for Piled Rafts Subjected to Nonuniform Vertical Loading, Journal of Geotechnical and Geoenvironmental Engineering, 130(1), 1–13, 2004.

Details

Primary Language

Turkish

Subjects

Civil Engineering

Journal Section

Research Article

Authors

Halil Murat Alğın ^*
Harran Üniversitesi
Türkiye

Arda Burak Ekmen
Harran Üniversitesi
Türkiye

Levent Yenmez This is me

Publication Date

September 1, 2019

Submission Date

February 28, 2018

Acceptance Date

August 29, 2018

Published in Issue

Year 2019 Volume: 30 Number: 5

DOI

https://doi.org/10.18400/tekderg.399679

IZ

https://izlik.org/JA64LU73MB

Cite

RIS / Bibtex

APA

Alğın, H. M., Ekmen, A. B., & Yenmez, L. (2019). Baret Kazıklı Radye Temellerin Üç Boyutlu Sonlu Elemanlar Analizi. Teknik Dergi, 30(5), 9443-9458. https://doi.org/10.18400/tekderg.399679

AMA

1.Alğın HM, Ekmen AB, Yenmez L. Baret Kazıklı Radye Temellerin Üç Boyutlu Sonlu Elemanlar Analizi. Teknik Dergi. 2019;30(5):9443-9458. doi:10.18400/tekderg.399679

Chicago

Alğın, Halil Murat, Arda Burak Ekmen, and Levent Yenmez. 2019. “Baret Kazıklı Radye Temellerin Üç Boyutlu Sonlu Elemanlar Analizi”. Teknik Dergi 30 (5): 9443-58. https://doi.org/10.18400/tekderg.399679.

EndNote

Alğın HM, Ekmen AB, Yenmez L (September 1, 2019) Baret Kazıklı Radye Temellerin Üç Boyutlu Sonlu Elemanlar Analizi. Teknik Dergi 30 5 9443–9458.

IEEE

[1]H. M. Alğın, A. B. Ekmen, and L. Yenmez, “Baret Kazıklı Radye Temellerin Üç Boyutlu Sonlu Elemanlar Analizi”, Teknik Dergi, vol. 30, no. 5, pp. 9443–9458, Sept. 2019, doi: 10.18400/tekderg.399679.

ISNAD

Alğın, Halil Murat - Ekmen, Arda Burak - Yenmez, Levent. “Baret Kazıklı Radye Temellerin Üç Boyutlu Sonlu Elemanlar Analizi”. Teknik Dergi 30/5 (September 1, 2019): 9443-9458. https://doi.org/10.18400/tekderg.399679.

JAMA

1.Alğın HM, Ekmen AB, Yenmez L. Baret Kazıklı Radye Temellerin Üç Boyutlu Sonlu Elemanlar Analizi. Teknik Dergi. 2019;30:9443–9458.

MLA

Alğın, Halil Murat, et al. “Baret Kazıklı Radye Temellerin Üç Boyutlu Sonlu Elemanlar Analizi”. Teknik Dergi, vol. 30, no. 5, Sept. 2019, pp. 9443-58, doi:10.18400/tekderg.399679.

Vancouver

1.Halil Murat Alğın, Arda Burak Ekmen, Levent Yenmez. Baret Kazıklı Radye Temellerin Üç Boyutlu Sonlu Elemanlar Analizi. Teknik Dergi. 2019 Sep. 1;30(5):9443-58. doi:10.18400/tekderg.399679

Cited By

Kazıklı temellerde zemin kazık etkileşimi parametrelerinin incelenmesi

Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi

https://doi.org/10.17341/gazimmfd.825224

Investigation of The Effectiveness of Blasting Patterns in Tunnel Excavations: The Case of The Sarıyer - Kilyos Tunnel

Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi

https://doi.org/10.29137/ijerad.1635246