KADIN GÖMLEĞİ DOKUMA KUMAŞ ÜRETİMİNDE DAĞILIMDAN BAĞIMSIZ KALİTE KONTROL KARTLARININ UYGULANMASI

Abstract

Bu çalışmada dağılımdan bağımsız kalite kontrol kartlarının bayan gömleği için dokuma üretiminde uygulaması verilmiştir. Çalışmada kullanılan dağılımdan bağımsız kalite kontrol kartı, (1) tarafından önerilmiştir. Farklı tasarım parametreleri için yanlış alarm oranı (FAR) ve ortalama çalışma uzunluğu (ARL) değerleri hesaplanmıştır. Bayan gömlekleri için dokuma üretimi yapan bir fabrikaya ait veriler bu kalite kontrol kartı ile analiz edilmiş ve sürecin istatistiksel olarak kontrol altında olup olmadığı incelenmiştir

Keywords

• İstatistiksel Kalite Kontrolü, Dağılımdan Bağımsız Kalite Kontrol Kartları, Hatalı Alarm Oranı (FAR), Ortalama Çalışma Uzunluğu (ARL), Bayan Gömleği Dokuması, Tekstil Sektörü

AN APPLICATION ON FANCY SHIRTING FABRIC PRODUCTION THROUGH DISTRIBUTION-FREE QUALITY CONTROL CHARTS

Abstract

This paper presents a case study of distribution-free quality control charts on fancy shirting fabric production. The distribution-free quality control chart used in this paper is proposed by (1). False alarm rate (FAR) and average run length (ARL) values for different design parameters are calculated. The process data obtained from the production mill in textile sector is analyzed with this distributionfree control chart and it is concluded that the process is statistically in control

Keywords

• Statistical Quality Control, Distribution-Free Quality Control Charts, False Alarm Rate, Average Run Length, Fancy Shirting Fabric, Textile Sector

References

1. 1. Balakrishnan, N., Triantafyllou and I. S., Koutras, M. V., 2010, “A Distribution-Free Control Chart Based on Order Statistics”, Communications in Statistics – Theory and Methods, Vol. 39, pp. 3652-3677.
2. 2. Burr, I. W., 1967, “The Effect of Non-Normality on Constants for X and R Charts”, Industrial Quality Control, 23, 563-568.
3. 3. Schilling, E. G. and Nelson, P. R., 1976, “The Effect of Non-Normality on the Control Limits of X Charts”, Journal of Quality Technology, 8, 183-188.
4. 4. Shewhart, W. A., 1939, Statistical Methods from the Viewpoint of Quality Control. Republished by Dover Publications in 1986, New York. 5. Woodall, W. H. and Montgomery, D. C., 1999, Research Issues and Ideas in Statistical Process Control. Journal of Quality Technology, 31, 376-386.
5. 6. Jacobs, D. C., 1990, “Statistical Process Control: Watch for Nonnormal Distributions”, Chemical Engineering Progress, 86, 19-27. 7. Yourstone, S. A. and Zimmer, W. J., 1992, “Non-normality and the Design of Control Charts for Averages”, Decision Sciences, 23, 1099-1113.
6. 8. Vermaat, M. B. (Thijs), Ion, R. A., Does, R. J. M. M. and Klaassen, C. A. J., 2003, “A Comparison of Shewhart Individuals Control Charts Based on Normal, Non-Parametric, and Extreme-Value Theory”. Quality and Reliability Engineering International, 19, 337-353.
7. 9. Das, N. and Bhattacharya, A., 2008, “A New Non-Parametric Control Chart for Controlling Variability”, Quality Technology & Quantitative Management, 5 (4), 351-361.
8. 10. Bakir, S. T., 2001, “Classification of Distribution-Free Quality Control Charts”, Proceedings of the Annual Meeting of the American Statistical Association, August 5-9.

9. 11. Montgomery, D.C., 2001, Introduction to Statistical Quality Control, 4th ed. John Wiley & Sons, New York.
10. 12. Nelson, L. S., 1982, “Control Chart for Medians”, Journal of Quality Technology, 14, 226–227.
11. 13. Janacek, G. J. and Meikle, S. E., 1997, “Control Charts Based on Medians”, The Statistician, 46 (1), 19-31.
12. 14. Park, H. I., 2008, “Bootstrap Median Control Chart”, Journal of the Korean Data Analysis Society, 10, 1861–1874.
13. 15. Park, H. I., 2009, “Median Control Charts Based on Bootstrap Method”, Communications in Statistics-Simulation and Computation, 38, 558–570.
14. 16. Park, H. I., 2013, “A Note on the Median Control Chart”, Communications for Statistical Applications and Methods, 20 (2), 107–113.
15. 17. Das, N., 2009, “A Comparison Study of Three Non-Parametric Control Charts to Detect Shift in Location Parameters”, The International Journal of Advanced Manufacturing Technology, 41, 799–807.
16. 18. Chakraborti, S., Van der Laan, P. and Van de Wiel, M. A., 2004, “A Class of Distribution-Free Control Charts”, Journal of the Royal Statistical Society: Series C (Applied Statistics), 53 (3), 443-462.