RESEARCH CONCERNING THE HEAT-SEALED TREATMENT PARAMETERS INFLUENCE ON THE MAIN CHARACTERISTICS OF A DOUBLED ENSEMBLE

Year 2014, Volume: 24 Issue: 4, 380 - 385, 01.12.2014

Ionut Dulgherıu Manuela Avadaneı Ciprian Cozmancıuc

Abstract

In the manufacturing process, the heat-sealed treatment is an important step, because it contributes to the shape of the product and to dimensional stability during its use. In the heat- sealed treatment it is important to choose the proper values of pressure and temperature, correlated with the time needed for each phase, because the adhesive temperature increases as the surface temperature of the base material rises. This paper presents some results concerning the correlation between the heat- sealed parameters and some characteristics of a doubled ensemble (the detachment capacity, wrinkling recurrence and rigidity) by taking into account the direction by which the adhesive material is attached to the base one

Keywords

Heat-sealed parameters, Capacity of detachment, Rigidity, Wrinkling recurrence

İKİ KATLI BİRLEŞTİRME İŞLEMİNİN ANA KARAKTERİSTİKLERİNE ISI İLE BİRLEŞTİRME İŞLEMİNİN ETKİSİ ÜZERİNE BİR ARAŞTIRMA

Abstract

References

• 1. Erdogan, M.C., Kansoy, O., Dirgar, E., The relations of check dimensions fabric consumption, Tekstil ve Konfeksiyon, Volume 58, Issue 5, May 2009, Pages 175-185
• 2. Hes, L., Ursache, M., Effect of composition of knitted fabrics on their cooling efficiency at simulated sweating , Indian Journal of Fibre and Textile Research, 36, (3), pp 281-284, 2011
• 3. Hoblea, N., Hoblea, Z., Aprecierea calităţii procesului de termolipire. CORTEP XII 2002.
• 4. Kishore, R.A., Tiwari, R., Dvivedi, A. and Singh, I., 2009, Taguchi analysis of the residual tensile strength after drilling in glass fiber reinforced epoxy composites, Materials and Design, Vol. 30, pp 2186 – 2190
• 5. Loghin, C., Ursache, M. and Ionescu ,I., 2010, Experimental research on the sewability of ferromagnetic micro-wires, Tekstil ve Konfeksiyon, Volume 20, Issue 4, pp. 373-378, 2010
• 6. Loghin, C., Ursache, M., Muresan, R., Muresan, A., Surface treatments applied to textile materials and implications on their behaviour in wet conditions, Industria Textila, Volume 61, Issue 6, pp.284-290, 2010
• 7. Marmarali, A., Dönmez Kretzschmar, S., Ozdil, N., Gülsevin Oğlakcioğlu, N., Parameters that affect thermal comfort of garment, Tekstil ve Konfeksiyon Vol. 04/2006, pp: 241-246.
• 8. Mitu, S., Hancu, S.P., Matenciuc ,C.C., Barladeanu, E., The limits of the sanogenetic indexes for vestimentary assemblies having new structural peculiarities, Industria Textila, Volume 59, Issue 1, pp.14-25, 2008
• 9. Mitu, S., Mitu, M. Bazele tehnologiei confecţiilor textile vol.I şi II. Editura “Performantica” Iaşi 2005
• 10. Oglakcioglu, N., Marmarali A., Thermal comfort properties of cotton knitted fabrics in dry and wet states, Tekstil ve Konfeksiyon , Vol. 20 , Issue: 3 , pp: 213-217 , 2010
• 11. Pamuk, G. and Ceken, F., 2013, Comparison of the mechanical behaviour spacer knit cotton and flax fabric reinforced composites, Industria Textila, Nr: 1/2013, ISSN 1222-5347.