DÖŞEMELİK DOĞAL VE YAPAY DERİLERİN AĞIR METAL İÇERİKLERİNİN BELİRLENMESİ

Year 2015, Volume: 25 Issue: 1, 33 - 37, 01.06.2015

Ahmet Aslan Nuray Olcay (ışık) Üzüm

Abstract

Bu çalışmada toksikolojik özelliklerinden dolayı birçok kullanım eşyasında bulunmasına sınırlamalar getirilen kadmiyum, kobalt, krom, bakır, civa, nikel, kurşun ve sınırlandırma getirilmeyen alüminyum ve çinko gibi ağır metallerin döşemelik doğal ve yapay derilerdeki miktarları tespit edilmiştir. Araştırmada; öncelikle derilerin yaş yakma işlemi ile toplam ağır metal içerikleri ICP-OES de belirlenmiştir. Daha sonra, derilerin kullanımı esnasında tere ve suya maruz kalmasıyla açığa çıkan ağır metal miktarları ICP-OES kullanılarak saptanmıştır. Doğal ve yapay derilerde saptanan en yüksek ağır metal elementinin krom olduğu tespit edilmiştir. Boyama ve finisaj prosesleri esnasındaki kimyasal ve fiziksel reaksiyonlardan dolayı küçük miktarlarda alüminyum, kobalt, bakır, nikel ve çinko elementleri tespit edilmiştir. Ayrıca her iki deri tipinde de hekzavalent krom, kadmiyum, civa ve kurşun metallerine rastlanılamamıştır. Son olarak da, ağır metal içerikleri, standart limit değerler ile kıyaslanmıştır

Keywords

Döşemelik doğal deri, döşemelik yapay deri, ağır metal, ICP-OES, çevre

DETERMINING THE HEAVY METAL CONTENTS OF NATURAL AND ARTIFICIAL UPHOLSTERY LEATHERS

Abstract

In this study, the amounts in natural and artificial leathers of heavy metals such as cadmium, cobalt, chrome, copper, mercury, nickel and lead, which are limited in many goods due to their toxicological features, and of aluminum and zinc, which are unlimited, were determined. First, the wet decomposition and the total heavy metal contents of the leathers were specified in ICP-OES. Later, the amount of heavy metal manifesting when the leathers were exposed to sweat and water was determined using ICP-OES. The heavy metal detected in the greatest quantities in natural and artificial leathers was chrome. Small amounts of aluminum, cobalt, copper, nickel and zinc were also determined due to the chemical and physical reactions during the dyeing and finishing processes,. However, neither hexavalent chrome, cadmium, mercury nor lead were encountered in either of the leather types. Finally, heavy metal contents were compared with standard limit values

Keywords

Natural upholstery leather, artificial upholstery leather, heavy metal, ICP-OES, environment

References

• 1. Zhang, M., Zhang, M. 2006, “ Assessing the Impact of Leather Industry to Water Quality in the Aojing Watershed in Zhejiang province, China”, Environmental Monitoring and Assessment, Vol:115, pp:321-333.
• 2. Aslan, A. And Gülümser, G., 2011, “Evaluation of Chrome-Tanned Leather Solid Wastes as Lubricating Filler Agents”, Tekstil ve Konfeksiyon, Vol:21, pp:405-409.
• 3. Basaran, B., Iscan, M., Bitlisli, B.O., et al., 2006, “Heavy Metal Contents of Various Finished Leathers”, Journal of the Society of Leather Technologists and Chemists, Vol. 90(6), pp: 229-234.
• 4. Bitlisli, B.O., Karavana, H.A., Basaran, B. and Aslan, A., 2005, “Importance of Using Genuine Leather in Shoe Production in Terms of Foot Comfort”, Journal of the Society of Leather Technologists and Chemists , Vol: 89, pp: 107-110.
• 5. Aslan, A., 2009, “Determination of Heavy Metal Toxicity of Finished Leather Solid Waste”, Bulletin Of Environmental Contaminatıon and Toxicology, Vol:82 pp: 633-638.
• 6. BLC, 2010, “Reach Update”, Leather International, Vol: September, pp:14-15.
• 7. Özdoğan, E., Korkmaz, A. Seventekin, N., 2007, “Eco-Tex and EU Eco Label”, Tekstil ve Konfeksiyon, Vol: 17, pp:149-152. 8. European Commission, 2004. “Official Journal of the European Communities”, http://europa.eu.int/comm/environment/ecolabel/pdf/furniture/draft_ criteria_furniture _june2002.pdf (20 Kasım 2004).
• 9. ISO, 2014, “The International Union of Leather Technologists and Chemists Societies”, http://www.iso.org/iso/iso_catalogue/catalogue_ tc/catalogue_tc_browse. htm?commid=55240&development=on (03 Ocak 2014).
• 10. ISO, 2013, “ISO 105-E04:2013 Textiles -- Tests for Colour Fastness - Part E04: Colour Fastness to Perspiration”, International Organization for Standardization, Switzerlan
• 11. Aslan, A., 2013, “Improving the Dyeing Properties of Vegetable Tanned Leathers Using Chitosan Formate”, Ekoloji, Vol: 22, pp:26-35.
• 12. BASF, 2010, “Pocket Book for the Leather Technologist”, http://visdombasfcrm.com/lp/Blue%20book.pdf (04 Nisan 2010).
• 13. Cantera, C.S., Greco, C.A. and Guisti, M., 1994, “Dechroming of Shavings.Part 1. Enzymic Alkaline Treatment. Study of Variables”, Das Leder, Vol: 11, pp:265-270.
• 14. Taylor M. M., Diendorf E. J. and Thompson C. J., 1997, “Extraction of Value Byproducts From the Treatment of Chromium Containing Collagenous Leather Industry Waste”, Journal of the Society of Leather Technologists and Chemists, Vol:81, pp:5-13.
• 15. Rajamaran, R., Poorneswari, S., Bangaruswamy, S., Rao, J.B. and Santappa, M., 1978, “Influence of Different Tanning Systems on the Characteristics of Leather”, Leather Science, Vol: 25, pp:394–399.
• 16. Tatano, Fabio; Acerbi, Nadia; Monterubbiano, Chiara; et al., 2012, “Shoe Manufacturing Wastes: Characterisation of Properties and Recovery Options”, Resources Conservation and Recycling”, Vol: 66, pp: 66-75.
• 17 SG, 2006, “The Test Mark for Low Pollutant Leather Products”, http://www.ecco.com/downloads/ECCO_SGlist.pdf (22 Kasım 2010).
• 18 Oeko-Tex Standard 100, 2010, “Limit Values and Fastness, Part 1”, http://www.oekotex.com/xdesk/ximages/470/16132_grenzwerte.pdf (22 Kasım 2010).
• 19. Harmancıoglu, M., Dikmelik, Y., 1993, “Inorganic Substances of Hide and Skin”, Raw Skin, Özen Press, Izmir, Turkey, pp: 207-210.
• 20. John G., 1997, “Finishing”, Possible Defects In Leather Production. Druck Partner Rübelman GmbH, Germany, pp: 158-209.
• 21. Graf, D., 2001, “Formation of Cr (VI) Traces in Chrome Tanned Leather: Causes, Prevention and Latest Findings”, Journal of the American Leather Chemists Association, 96, pp: 169-179.
• 22. Barroso J. M., 2014, “Regulations”, Official Journal of the European Union, 90, pp: 1-3.
• 23. Basaran, B., Isik, N.O., 2007, “Cr(VI) Formation in Double-Face Sheepskins: Effect of Chromium Level and Ironing Temperature”, Journal of the Society of Leather Technologists and Chemists, Vol. 91(1), pp: 4-10.