SeaCell® KUMAŞLARIN TERMAL ÖZELLİKLERİ VE GÜÇ TUTUŞURLUK ÖZELLİKLERİNİN İNCELENMESİ

Year 2013, Volume: 23 Issue: 2, 107 - 112, 01.12.2013

B. Cenkkut Gültekin Mehmet Akalın S. Müge Yükseloğlu

Abstract

Bu çalışmada medikal ve ekolojik olarak bilinen SeaCell®active and SeaCell®pure ipliklerden üretilen kumaşların güç tutuşurluk özellikleri araştırılmıştır. SeaCell® staple elyaftan üretilen ipliklerden kumaşlar oluşturularak boyama sonrası SeaCell®active ve SeaCell®pure kumaşlara fosfor–inorganik sinerjik ve organofosfor bileşikleri (N-hidroksimetil-3-dimetilfosfonopropionamid) maddeleri kullanılarak güç tutuşurluk bitim işlemi uygulandı. Daha sonra yıkama öncesi ve yıkama sonrası güç tutuşurluk özellikleri incelendi. Buna ek olarak termal özellikleri ve güç tutuşurluk maddelerinin etkilerine bakıldı. Güç tutuşurluk maddeleri uygulanan SeaCell®active and SeaCell®pure kumaşların Limit Oksijen İndeksi (LOI), diferansiyel taramalı kalorimetri (DSC) ve termogravimetrik analiz yöntemleri kullanılarak yapısal değişikler araştırıldı. %100 SeaCell® kumaşlara uygulanan güç tutuşurluk işlemi sonrası, fosfor–inorganik sinerjik maddesi ile LOI değeri %31, 15 yıkama sonunda ise LOI değeri %20 olarak elde edilmiştir. N-hidroksimetil-3-dimetilfosfonopropionamid maddesi ile yapılan uygulamada ise %28 LOI değeri elde edilirken 15 yıkama sonrasında %26 olarak tespit edilmiştir. DSC ve TGA termogramların birbirlerini desteklediği görülmüştür

Keywords

Güç tutuşurluk, Termal özellikler, SeaCell® kumaşlar, Antimikrobiyal lifler, Yıkama

THE STUDY OF FLAME RETARDANCY AND THERMAL PROPERTIES OF SeaCell® FABRICS

Abstract

In this study, the properties of flame retardant woven fabrics produced from the SeaCell®active and SeaCell®pure yarns, which are known as ecological and medical textile materials, were investigated. The yarns were produced from SeaCell® stapel fibres and then were woven into fabric. After dyeing, the fabrics flame retardants which has phosphorus–inorganic synergism and organophosphorus compounds (N-hydroxymethyl-3-dimethylphosphonopropionamide), were applied to the the SeaCell®active and SeaCell®pure fabrics, and later the flame retardant properties were determined before and after washing processes. In addition to that, thermal properties of the fabrics and the effects of flame retardants were studied. The flammability of the flame retardant treated SeaCell®active and SeaCell®pure were characterized by using limiting oxygen index (LOI). Structural changes of the treated SeaCell®active and SeaCell®pure and the compounds were carried out by using thermal analysis methods of differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). After flame retardant treatment on the 100% SeaCell® fabrics, the LOI value of the sample with phosphorus–inorganic synergism reached to 31 % and after 15 successive washing the LOI value was 20%. On the other hand, while obtaining 28% LOI value with the application of the N-hydroxymethyl-3dimethylphosphonopropionamide after 15 successive washing this was achieved only 26%. It was also observed that both DSC and TGA thermograms were verifies their results

Keywords

Flame retardancy, Thermal properties, SeaCell® fabric, Antimicrobial fibres, Washing

References

• 1. Zikeli S., Wolschner B. and Eichinger D., 1987, “Process For Producing Solutions Of Cellulose”, Patent EP 0356419.
• 2. Zikeli S., 2001 “Lyocell Fibers With Health-Promoting Effect Through Incorporation Of Seaweed”, Chemical Fibers International, Vol 51, pp: 272-276.
• 3. Grier N., 1977, “Silver and its compounds”, Antiseptics and Disinfectants, Philadelphia, Pa, Lea & Febiger pp: 375- 389.
• 4. http://www.samsungft.com/data/SeacellPresentationNewVersion.pdf ,(Access Date: 07.01.2013)
• 5. Zikeli S. and Ecker F., 2000, “Verfahren und Vorrichtung zur Herstellung von Endlosformkörpern”, Patent DE10037923.
• 6. Johnson&Johnson Product information, 2001, Actisorb Silver 220.
• 7. Shigeko N., Fumi M. and Toshimasa H., 1999, “Durable Flame-Retardant Finished Cotton Fabrics Characterized by Thermal Degradation Behaviors” Journal of Applied Polymer Science, Vol. 71, pp: 975–987.
• 8. Zaikov G. E. and Lomakin S. M., 2002, “Ecological Issue of Polymer Flame Retardancy” Journal of Applied Polymer Science, Vol.86, 2449-2462.
• 9. Lewin M. and Weil E. D., “In Mechanisms And Modes Of Action In Flame Retardancy Of Polymers”, (Horrocks, A.R. and Price, D., Ed.), 2001, Fire Retardant Materials, Woodhead Publishing Ltd and CRC Press LLC, Cambridge England, pp: 31-68.
• 10. Purser D., In Toxicity Of Fire Retardants in Relation To Life Safety And Environmental Hazards, (Horrocks, A. R., Price, D., Ed.), 2001, Fire Retardant Materials, Woodhead Publishing Limited, England, pp: 69-127.
• 11. Gültekin B. C., 2011, “SeaCell® İçerikli Kumaşların Güç Tutuşurluk ve Termal Özelliklerinin Geliştirilmesi” Doktora Tezi, Marmara Üniversitesi Fen Bilimleri Enstitüsü, İstanbul, pp: 69-71.
• 12. ASTM D 2863, “Test Method For Measuring The Minimum Oxygen Concentration To Support Candlelike Combustion Of Plastics (Oxygen İndex)”,2005.
• 13. http://www.perkinelmer.com/Catalog/Product/ID/N5370742, (Access Date: 07.01.2013)