Research Article
BibTex RIS Cite
Year 2012, Volume: 22 Issue: 1, 52 - 57, 31.03.2012

Abstract

References

  • 1. Hands C., Hergeth H.A., Hudson P., 1997, “Marker Making in Small Clothing Companies: Part 1”, International Journal of Clothing Science and Technology, 9, pp: 154-165.
  • 2. Erdoğan M Ç., 1998, “Modern Kesim Sistemleri”, Tekstil ve Konfeksiyon, 8(1), pp: 74-77.
  • 3. Assyst-Bullmer, 2003, “Bullmer Procut Cutter User’s Manual”, Part: 5, pp: 1-30.
  • 4. TSE, “TS 397 EN ISO 9237 Textiles - Determination of the permeability of fabrics to air”.
  • 5. TSE, “TS 251 Textiles - Woven fabrics - Determination of mass per unit length and mass per unit area”. 6. Blekac R., Gersak J., 1998, “Influence of Mechanichal and Physical Properties of Fabrics on Cutting Process”, International Journal of Clothing Science and Technology, 10(3/4), pp: 293-304.

AN INVESTIGATION ON THE CUTTING PARAMETERS FOR VARIOUS TYPES OF FABRICS

Year 2012, Volume: 22 Issue: 1, 52 - 57, 31.03.2012

Abstract

Same type fabric and same cutting plan can be cut in different methods by using computer aided fabric cutting systems. This is possible with changing the parameters inside the program which is operating the cutter. In this research; the effects of cutting parameters on the cutting quality and the cutting duration were analyzed. In this study, six different cutting having different models and fabric characteristics were examined. During the study; it was seen that same parameters can sometimes be used while cutting of different fabric types; but change in the parameters is required generally according to fabric, model, marker plan and spreading. Especially, while determining vacuum intensity that will be applied to the cutting of the different type fabrics, fabric air permeability were measured and the correlation between fabric air permeability, spreading height and the vacuum intensity that will be applied were presented. Fabric type, marker plan, spreading height and clothing model characteristics are determinative elements for determining cutting parameters. Cutting efficiency and quality can be increased and possible defects can be prevented with changing the cutting parameters by the operator.

References

  • 1. Hands C., Hergeth H.A., Hudson P., 1997, “Marker Making in Small Clothing Companies: Part 1”, International Journal of Clothing Science and Technology, 9, pp: 154-165.
  • 2. Erdoğan M Ç., 1998, “Modern Kesim Sistemleri”, Tekstil ve Konfeksiyon, 8(1), pp: 74-77.
  • 3. Assyst-Bullmer, 2003, “Bullmer Procut Cutter User’s Manual”, Part: 5, pp: 1-30.
  • 4. TSE, “TS 397 EN ISO 9237 Textiles - Determination of the permeability of fabrics to air”.
  • 5. TSE, “TS 251 Textiles - Woven fabrics - Determination of mass per unit length and mass per unit area”. 6. Blekac R., Gersak J., 1998, “Influence of Mechanichal and Physical Properties of Fabrics on Cutting Process”, International Journal of Clothing Science and Technology, 10(3/4), pp: 293-304.
There are 5 citations in total.

Details

Primary Language English
Journal Section Articles
Authors

Serkan Boz This is me

Ziynet Öndoğan This is me

Publication Date March 31, 2012
Submission Date February 11, 2010
Acceptance Date September 22, 2011
Published in Issue Year 2012 Volume: 22 Issue: 1

Cite

APA Boz, S., & Öndoğan, Z. (2012). AN INVESTIGATION ON THE CUTTING PARAMETERS FOR VARIOUS TYPES OF FABRICS. Textile and Apparel, 22(1), 52-57.

No part of this journal may be reproduced, stored, transmitted or disseminated in any forms or by any means without prior written permission of the Editorial Board. The views and opinions expressed here in the articles are those of the authors and are not the views of Tekstil ve Konfeksiyon and Textile and Apparel Research-Application Center.