Heat enhancement in solar flat plate collectors – A review

Abstract

This article provides an overview of recent advancements in the design and performance of flat plate solar collectors (FPSCs) for solar thermal power plants. The article highlights various strategies that have been explored to improve the efficiency of FPSCs, including the use of Micro Heat pipe Arrays, nano-materials, phase change materials, and novel tube geometries. The study emphasizes the importance of keeping costs low while improving overall collector efficiency and highlights the research gap in distinct aspects of FPSCs for heat enhancement. The article concludes that these advancements have the potential to significantly increase the use of solar thermal power, which could play a critical role in reducing our dependence on fossil fuels and mitigating climate change. This study examines the power potential and carbon emission reduction capabilities of solar collectors in India, taking into account the local climatic conditions and geographical location. The study also identifies major challenges and opportunities in the current research domain. Based on the analysis, the study highlights the opportunities for commercializing low cost solar plants in India.

Keywords

• Absorber Plate
• Flat Plate Solar Collector
• Heat Transfer
• Heat Pipe
• Nano Material
• Phase Change Material
• Tilt Angle

References

1. [1] Taner TA. Feasibility study of solar energy-techno economic analysis from Aksaray city, Turkey. J Therm Engineer 2018;5:25–30. [CrossRef]
2. [2] Ahmadi MH, Ghazvini M, Sadeghzadeh M, Nazari MA, Kumar R, Naeimi A, et al. Solar power technology for electricity generation: A critical review. Energy Sci Engineer 2018;6:340–361. [CrossRef]
3. [3] Ajay P, Mahesh K, Himanshu M, Rahul GA. Review on solar flat plate air collector with different design modifications. International Multidisciplinary Conference 2021, Oct 31. pp. 65–78.
4. [4] Tonekaboni N, Salarian H, Nimvari ME, Khaleghinia J. Energy and exergy analysis of an enhanced solar CCHP system with a collector embedded by porous media and nanofluid. J Therm Engineer 2021;7:1489–1505. [CrossRef]
5. [5] Bracamonte J, Parada J, Dimas J, Baritto M. Effect of the collector tilt angle on thermal efficiency and stratification of passive water in glass evacuated tube solar water heater. Appl Energy 2015;155:648–659. [CrossRef]
6. [6] Werner P. PV - enhanced solar thermal power. Energy Procedia 2014;57:477–486. [CrossRef]
7. [7] Robyns B, Davigny A, François B, Henneton A, Sprooten J. Electricity Production from Renewable Energies. Wiley; 2012. [CrossRef]
8. [8] Touafek K, Khelifa A, Moussa HB, Tabet I, Adouane M. Conception and study of a galvanized tubes hybrid PV / T collector for building application. J Therm Engineer 2015;1:303. [CrossRef]

9. [9] Gaudino E, Musto M, Caldarelli A, De Luca D, Di Gennaro E, Russo R. Evaluation of the absorber temperature frequency function valid for evacuated flat plate collectors. Energy Rep 2022;8:1071–1080. [CrossRef]
10. [10] Tabish A, Nagesh B, Kishor S, MdIrfanul H, Nishant R, Chandan S. Performance augmentation of the flat plate solar thermal collector: A review. Energies 2021;14:6203. [CrossRef]
11. [11] Kocer A, Gokcek M, Gungor A. Comparison of empirical models for the estimation of monthly global solar radiation at Nigde in Turkey. Curr J Appl Sci Technol 2015;11:1–8. [CrossRef]
12. [12] Alam T, Meena CS, Balam NB, Kumar A, Cozzolino R. Thermo-hydraulic performance characteristics and optimization of protrusion rib roughness in solar air heater. Energies 2021;14:3159. [CrossRef]
13. [13] Abdulkadir K, Murat G, Afsin G. Comparison of empirical models for the estimation of monthly global solar radiation at Nigde in Turkey. Br J Appl Sci Technol 2015;11:1–8. [CrossRef]
14. [14] Agarwal, Abhishek V, Vineet SN. Comparative approach for the optimization of tilt angle to receive maximum radiation. Int J Engineer Sci Emerg Technol 2012;1:1–9.
15. [15] Ahmed OK, Algburi S, Daoud RW, Aziz EF. Photovoltaic storage solar collector: Experimental assessment. Energy Reports 2022;8:13698–13707. [CrossRef]
16. [16] Wang P, Chung T. Recent advances in membrane distillation processes: Membrane development, configuration design and application exploring. J Membrane Sci 2015;474:39–56. [CrossRef]
17. [17] Vedanrayanan V, Dilli SJ, Arulvendhan K., Thirusenthil KP, Selvakumar R, Maridurai T, et al. Performance development and evaluation of solar air collector with novel phase change material. Int J Photoenergy 2022;3787141. [CrossRef]
18. [18] Hussien AA, Awad A, Ali HHM. Evaluation of the thermal efficiency of nanofluid flows in flat plate solar collector. J Therm Engineer 2024;10:299–307. [CrossRef]
19. [19] Aravind KC. A review of solar flat plate liquid collector's components. Int J Adv Res Innov 2015;3;138–141. [CrossRef]
20. [20] Papadimitratos A, Sobhansarbandi S, Pozdin V, Zakhidov A, Hassanipour F. Evacuated tube solar collectors integrated with phase change materials. Solar Energy 2016;129:10–19. [CrossRef]
21. [21] Budihardjo I, Morrison GL, Behnia M. Natural circulation flow through water-in-glass evacuated tube solar collectors. Sol Energy 2007;81:1460–1472. [CrossRef]
22. [22] Bhowmik H, Amin R. Efficiency improvement of flat plate solar collector using reflector. Energy Rep 2017;3:119–123. [CrossRef]
23. [23] Lambert AA, Cuevas S, del Río JA. Enhanced heat transfer using oscillatory flows in solar collectors. Solar Energy 2006;80:1296–1302. [CrossRef]
24. [24] Chopra K, Pratik KP, Mahendran S, Tyagi VV, Pandey AK. Recent advancements in design of flat plate solar collectors. IOP Conf Series Mater Sci Engineer 2021;1127:1–10. [CrossRef]
25. [25] Ekadewi A, Djatmiko I, Prabowoa. The optimal tilt angle of a solar collector. Energy Procedia 2013;32:166–175. [CrossRef]
26. [26] YiShui T, Zhao C. A review of solar collectors and thermal energy storage in solar thermal applications. Appl Energy 2013;104:538–553. [CrossRef]
27. [27] Singh RK, Lazarus IJ, Souliotis M. Recent developments in integrated collector storage (ICS) solar water heaters: A review. Renew Sustain Energy Rev 2016;54:270–298. [CrossRef]
28. [28] Salvi SS, Bhalla V, Taylor RA, Khullar V, Otanicar T, Phelan PE, et al. Technological advances to maximize solar collector energy output: A review. J Electronic Packaging 2018;140:040802. [CrossRef]
29. [29] Anthony XA, William Q, Luis FTR. CFD analysis of a solar flat plate collector with different cross sections. Enfoque UTE 2020;11:95–108. [CrossRef]
30. [30] Barriga J, Ruiz-De-Gopegui U, Goikoetxea J, Coto B, Cachafeiro H. Selective coatings for new concepts of parabolic trough collectors. Energy Procedia 2014;49:30–39. [CrossRef]
31. [31] Cabral D. Development and performance comparison of a modified glazed CPC hybrid solar collector coupled with a bifacial PVT receiver. Appl Energy 2022;325:119653. [CrossRef]
32. [32] Camelia S, Dorin S. Optimum tilt angle for flat plate collectors all over the world – a declination dependence formula & comparisons of three solar models. Energy Conver Manage 2014;81:133–143. [CrossRef]
33. [33] Moss R, Henshall P, Arya F, Shire GSF, Hyde T, Eames PC. Performance and operational effectiveness of evacuated flat plate solar collectors compared with conventional thermal, PVT and PV panels. Appl Energy 2018;216:588–601. [CrossRef]
34. [34] Jha P, Das B, Gupta R. Energy matrices evaluation of a conventional and modified partially covered photovoltaic thermal collector. Sustain Energy Technol Assess 2022;54:102610. [CrossRef]
35. [35] Mustafa A, Noranai Z, Imran A. Solar absorption cooling systems: a review. J Therm Engineer 2021;7:970–983. [CrossRef]
36. [36] Hassan A, Nikbahkt AM, Welsh Z, Yarlagadda P, Fawzia S, Karim A. Experimental and thermodynamic analysis of solar air dryer equipped with V-groove double pass collector: Techno-economic and exergetic measures. Energy Conver Manage 2022;16:100296. [CrossRef]
37. [37] Sunil VY, Yogeshwar JV, Sandeep MP. Analyze the effect of various shapes of riser tubes on flat plate solar water heater efficiency. Int Res J Engineer Technol 2022;9:275–280.
38. [38] Ganesh KB, Shubhangi GK. Performance analysis of flat plate collector by changing geometry of absorber tube – A review. Int J Innov Res Sci Engineer Technol 2017;6:538–544.
39. [39] Kalogirou SA. Solar thermal collectors and applications. Prog Energy Combust Sci 2004;30:231–295. [CrossRef]
40. [40] Saurabh P, Divya P, Bharat A. Performance evaluation of nanofluids in solar thermal and solar photovoltaic systems: A comprehensive review. Renew Sustain Energy Rev 2022;153:111738. [CrossRef]
41. [41] Pritam D, Chandramohan VP. A critical review on solar chimney power plant technology: Influence of environment and geometrical parameters, barriers for commercialization, opportunities, and carbon emission mitigation. Environment Sci Poll Res 2022;29:69367–69387. [CrossRef]
42. [42] Xia T, Li Y, Wu X, Fan Z, Shi W, Liu X, et al. Performance of a new active solar heat storage release system for Chinese assembled solar greenhouses used in high latitudes and cold regions. Energy Reports 2022;8:784–797. [CrossRef]
43. [43] Alghoul MA, Sulaiman MY, Azmi BZ, Abdul Wahab M. Review of materials for solar thermal collectors. Anti-corrosion Method Mater 2005;52:199–206. [CrossRef]
44. [44] Alkumait AR, Abed FM, Mina A. Experimental study on the thermal performance of a solar collector and the effect of the tilt angle on the collector efficiency. IOP Conf Series Mater Sci Engineer 2018;454:012135. [CrossRef]
45. [45] Anchal A, Mehmet A, Ashutosh S, Anand M, Ranchan C, Tej S. Solar collector tilt angle optimization for solar power plant setup able sites at Western Himalaya and correlation formulation. J Therm Anal Calorim 2022;147:11417–11431. [CrossRef]
46. [46] Basavanna S, Shashishekar KS. CFD Analysis of triangular absorber tube of a solar flat plate collector. Int J Mech Engineer Robotics Res 2013;2:19–24.
47. [47] Ramachandra TV, Krishnadas G, Jain R. Solar potential in the Himalayan landscape. ISRN Renew Energy 2012;12:1–13. [CrossRef]
48. [48] Burch J, Christensen C, Salasovich J, Thornton J. Simulation of anunglazed collector system for domestic hot water and space heating and cooling. Solar Energy 2004;77:399–406. [CrossRef]
49. [49] Deng YC, Zhao YH, Quan ZH, Zhu TT. Experimental study of the thermal performance for the novel flat plate solar water heater with micro heat pipe array absorber. Energy Procedia 2015;70:41–48. [CrossRef]
50. [50] Hassan A, Nikbahkt AM, Welsh Z, Yarlagadda P, Fawzia S, Karim A. Experimental and thermodynamic analysis of solar air dryer equipped with V-groove double pass collector: Techno-economic and exergetic measures. Energy Conver Manage 2022;16:100296. [CrossRef]
51. [51] Camelia S, Dorin S. Optimum tilt angle for flat plate collectors all over the world – a declination dependence formula & comparisons of three solar models. Energy Conver Manage 2014;81:133–143. [CrossRef]
52. [52] Koçer A, Yaka I, Sardoğan G, Güngör A. Effects of tilt angle on flat-plate solar thermal collector systems. Br J Appl Sci Technol 2015;9:77–85. [CrossRef]
53. [53] Hossein C, Yahya A, Esmaeil E, Saeid Z, Mahdi H , Mostafa K. Experimental study on thermal efficiency of flat plate solar collector using Tio2/water nanofluid. Modern Appl Sci 2013;7:10. [CrossRef]
54. [54] Anthony XA, William Q, Luis FTR. CFD analysis of a solar flat plate collector with different cross sections. Enfoque UTE 2020;11:95–108. [CrossRef]
55. [55] Aminreza N, Ebrahim H, Mojtaba M, Ali E. An experimental study of the thermal performance of the square and rhombic solar collectors. Therm Sci 2018;22:487–494. [CrossRef]
56. [56] Du B, Lund PD, Wang J. Improving the accuracy of predicting the performance of solar collectors through clustering analysis with artificial neural network models. Energy Reports 2022;8:3970–3981. [CrossRef]
57. [57] Papadimitratos A, Sobhansarbandi S, Pozdin V, Zakhidov A, Hassanipour F. Evacuated tube solar collectors integrated with phase change materials. Solar Energy 2016;129:10–19. [CrossRef]
58. [58] Todd O, Phelan PE, Prasher RS, Rosengarten G, Taylor RA. Nanofluid-based direct absorption solar collector. Renew Energy 2020;145:903–913. [CrossRef]
59. [59] Sinem K, Emin E, Cengiz Y. Investigation of the effect on the efficiency of phase change material (PCM) placed in solar collector tank. Therm Sci Engineer Progress 2018;5:25–31. [CrossRef]
60. [60] Li Y, Liang X, Song W, Li T, Wang D, Liu Y. Optimization and thermal performance of U-type evacuated tube solar collector filled with phase change material. Energy Reports 2022;8:6126–6138. [CrossRef]
61. [61] Patil BL, Hole JA, Wankhede SV. Performance enhancement of stepped solar still coupled with evacuated tube collector. J Therm Engineer 2023;9:1177–1188. [CrossRef]
62. [62] Bamisile O, Cai D, Adun H, Adedeji M, Dagbasi M, Dika F. A brief review and comparative evaluation of nanofluid application in solar parabolic trough and flat plate collectors. Energy Reports 2022;8:156–166. [CrossRef]
63. [63] Ajeena AM, Víg P, Farkas I. A comprehensive analysis of nanofluids and their practical applications for flat plate solar collectors: Fundamentals, thermophysical properties, stability, and difficulties. Energy Reports 2022;8:4461–4490. [CrossRef]
64. [64] Alkathiri AA, Jamshed W, Uma Devi SS, Eid MR, Bouazizi ML. Galerkin finite element inspection of thermal distribution of renewable solar energy in presence of binary nanofluid in parabolic trough solar collector. Alexandria Engineer J 2022;61:11063–11076. [CrossRef]
65. [65] Almitani KH, Alzaed A, Alahmadi A, Sharifpur M, Momin M. The influence of the geometric shape of the symmetrical twisted turbulator on the performance of parabolic solar collector having hybrid nanofluid: Numerical approach using two-phase model. Sustain Energy Technol Assess 2022;51:101882. [CrossRef]
66. [66] Cao Y, Kamrani E, Mirzaei S, Khandakar A, Vaferi B. Electrical efficiency of the photovoltaic/thermal collectors cooled by nanofluids: Machine learning simulation and optimization by evolutionary algorithm. Energy Reports 2022;8:24–36. [CrossRef]
67. [67] Hossein C, Yahya A, Esmaeil E, Saeid Z, Mahdi H, Mostafa K. Experimental study on thermal efficiency of flat plate solar collector using Tio2/water nanofluid. Modern Appl Sci 2013;7:10. [CrossRef]
68. [68] Muhammad, MJ, Muhammad IA, Sidik NaC, Yazid MNaWM. Thermal performance enhancement of flat-plate and evacuated tube solar collectors using nanofluid: A review. Int J Comm Heat Mass Transf 2016;76:6–15. [CrossRef]
69. [69] Rashidi S, Akbarzadeh M, Karimi N, Masoodi R. Combined effects of nanofluid and transverse twisted-baffles on the flow structures, heat transfer and irreversibilities inside a square duct – A numerical study. Appl Therm Engineer 2018;130:135–148. [CrossRef]
70. [70] Bhattacharyya S, Vishwakarma DK, Srinivasan A. Thermal performance enhancement in heat exchangers using active and passive techniques: a detailed review. J Therm Anal Calorim 2022;147:9229–9281. [CrossRef]
71. [71] Rukruang A, Chimres N, Kaew-On J, Mesgarpour M, Mahian O, Wongwises S. A critical review on the thermal performance of alternating cross-section tubes. Alexandria Engineer J 2022;6:7315–7337. [CrossRef]
72. [72] Kumar R, Varun Kumar A. Thermal and fluid dynamic characteristics of flow through triangular cross-sectional duct: A review. Renew Sustain Energy Rev 2016;61:123–140. [CrossRef]
73. [73] Kurnia JC, Sasmito AP. Heat transfer performance of non-circular coiled tubes - Research summary, challenges and directions. Int J Automotive Mech Engineer 2016;13:3710–3727. [CrossRef]
74. [74] Yeole SV, Vaidya JV, Patil SM. Analyze the effect of various shapes of riser tubes on flat plate solar water heater efficiency. Int Res J Engineer Technol 2022;9:275–280.
75. [75] Baig M. Abbas MK, Mohi MR, Malik MR. Calculation and Fabrication of a solar flat plate collector efficiency using mild steel as absorber plate. Int J Sci Technol Engineer 2017;3:36–41.
76. [76] Solangi K, Islam MR, Saidur R, Rahim N, Fayaz HA. Review on global solar energy policy. Renew Sustain Energy Rev 2011;15:2149–2163. [CrossRef]
77. [77] Mekhilef S, Saidur R, Safari A. A review on solar energy use in industries. Renew Sustain Energy Rev 2011;15:1777–1790. [CrossRef]
78. [78] Gordon JM, Kreider JF, Reeves P. Tracking and stationary flat plate solar collectors: Yearly collectible energy correlations for photovoltaic applications. Solar Energy 1991;47:245–252. [CrossRef]
79. [79] Kuravi S, Trahan J, Goswami DY, Rahman MM, Stefanakos EK. Thermal energy storage technologies and systems for concentrating solar power plants. Prog Energy Combust Sci 2013;39:285–319. [CrossRef]
80. [80] Miyan M, Shukla MK. Review on non-conventional energy resources in India. Samriddhi J Physical Sci Engineer Techno 2018;10:87–94. [CrossRef]
81. [81] Dhingra R, Jain A, Pandey A, Mahajan S. Assessment of renewable energy in India. Int J Environ Sci Develop 2014;5:459–462. [CrossRef]
82. [82] Swapnil SS, Vishal B, Robert AT, Vikrant K, Todd PO, Patrick EP. Technological advances to maximize solar collector energy output: A review. J Electronic Packaging 2018;140:040802. [CrossRef]
83. [83] Thirugnanasambandam M, Iniyan S, Goic R. A review of solar thermal technologies. Renew Sustain Energy Rev 2010;14:312–322. [CrossRef]
84. [84] Sahu S, Sahu NK, Sahu BL, Sahu KK. Solar energy in India, achievements, the potential of solar energy, and their importance. In: Nishad GR, Kumar Patel S, Kumar Verma D, Kumar Mahish P, Kumar H, editors. Role of Applied Science in Social Implication; 2023. pp. 149–165.
85. [85] IEA. Progress with solar heat in India. Available at: https://www.iea.org/commentaries/progress-with-solar-heat-in-india. Accessed April 17, 2024.
86. [86] Ministry of New and Renewable Energy. Physical Achievements. Available at: https://mnre.gov.in/physical-progress/. Accessed Feb 12, 2024.