HARNESSING AND STORING SOLAR THERMAL ENERGY USING PHASE CHANGE MATERIAL (PCM) IN A SMALL FLAT PLATE COLLECTOR

Year 2020, , 511 - 520, 01.07.2020

Sathish Kumar Gurupatham Govindasamy K. Manikandan Fahad Fahad

https://doi.org/10.18186/thermal.764178

Cited By: 4

Abstract

Recently, the initiative to bring down the continuous increase in the level of greenhouse gas emissions has widely spread in many countries not only because of the stringent emission norms but also the rising fuel prices which have led to utilize renewable energy sources, more. When it comes to the different forms of renewable energy available, solar energy is considered to be the best option due to its abundant availability in nature. Still, there are a few hurdles to first get over when dealing with solar energy. For instance, the lack of effective technology has caused solar energy to be a costly endeavor and there are issues involved in the process of conversion of solar energy into useful forms of energy. Due to the recent developments in technology, the application of phase change materials (PCM) has become an attractive method to store solar energy. Among various sugar alcohols, Erythritol is the one which is higher in latent heat, more thermally stable, non-toxic, inexpensive, and easily available. In this paper, the phase change material, Erythritol (C4H8O4) is utilized to harness the solar energy and a novel method of transporting the solar energy from the location it was harnessed to a location where it can be utilized is also shown. The variation in the rate at which the solar energy is harnessed is also shown on five different days when the direct solar radiation was high and low on the location of experiment. Keywords: solar radiation, phase change material (PCM), solar energy.

Keywords

Phase Change Material, Latent Heat, Solar Energy

References

• [1] Schaetzle WJ. Thermal energy storage in aquifers: design and applications. New York: Pergamon; 1980
• [2] Schmidt FW. Thermal energy storage and regeneration (series in thermal and fluids engineering). New York: McGraw-Hill; 1981.
• [3] Beckmann G, Gill PV. Thermal energy storage: basics–design–applications to power generation and heat supply (course in mathematical physics). Berlin: Springer; 1984.
• [4] Garg HP, Mullick SC, Bhargava AK. Solar thermal energy storage. Dordrecht, Holland: Reidel Publishing
• [5] Garg HP. Advances in solar technology: collection and storage systems. Dordrechnt: Kluwer Academic Publishers; 1987
• [6] Aran sole, Hannag Neumann,Sophia Niedermaier, Luisa F.Cabeza,Elena Palomo. Thermal stability test of sugar alcohols as phase change materials for medium temperature energy storage application.Energy procedia 48(2014) 436-439
• [7] Murat kenisarin, Khamid Mahkamov. Solar Energy storage using phase change materials. Renewable and sustainable Energy Reviews 11(2007)1913-1965
• [8] Atul Sharma,V.V.Tyagi, C.R.Chen,D.Buddhi. Review on thermal energy storage with phase change materials and application. Renewable and sustainable Energy Reviews13(2009)318-345.
• [9] Lane GA. Solar heat storage: latent heat materials, vol. 1. Background and scientific principles. Boca
• [10] Lane GA. Solar heat storage: latent heat materials, vol. 2. Technology. Boca Raton, FL: CRC Press; 1985.
• [11] Dincer I, Rosen MA. Thermal energy storage: systems and applications. Chichester, England: Wiley; 2002.
• [12] Schro¨der J, Gawron K. Latent heat storage. Energy Res 1981; 5:103–9.
• [13] Liwu Fan,J.M.Khodadadi.Thermal conductivity enhancement of phase change materials for thermal energy storage: A review. Renewable and sustainable Energy Reviews 15(2011)24-46
• [14] Kinga pielichowska,Krzysztof pielichowski. Phase change materials for thermal energy storage. Progress in materials science 65(2014)67-123
• [15] Mohammed Ali Fazilati, Ali Akbar Alemrajabi.phase Change material for enhancing solar water heater, an experimental approach. Energy conservation and managements 71(2013)138-145
• [16] Atul Sharma, A.Shukla, C.R. Chen ,Tsung –Nan Wu.Development of phase change materials(PCMs) for low temperature energy storage applications. Sustainable Energy technologies and Assessments 7 (2014)17-21
• [17] Agyenim F, Eames P, Smyth M. A comparison of heat transfer enhancement in medium temperature thermal energy storage heat exchanger using fins and multitubes. ISES Solar World Congress 2007;2726–30.
• [18] Kinga pielichowska,Krzysztof pielichowski. Phase change materials for thermal energy storage. Progress in materials science 65(2014)67-123
• [19] Weihuan Zhao, Ying Zheng, Joseph C.Sabol, Kemal Tuzla,sudhakar Neti, Alparslan oztekin,John C.Chen. High Temperature calorimetry and use of magnesium chloride for thermal energy storage.Renewable Energy 50(2013)988-993
• [20] Muhsin Mazman, Luisa F. Cabeza, Harald Mehling, Miquel Nogues, Hunay Evliya, Halime O. Paksoy. Utilization of phase change materials in solar domestic hot water system, 2009; 34:1639-1643.
• [21] Shaokun Song, Lijie Dong, Yang Zhang, Shun Chen, Qi Guo, Sufen Deng, Shuai Si, Chuanxi Xiong. Energy: Lauric acid/intercalated kaolinite as form-stable phase change material for thermal energy storage, 2014; 76:385- 389.
• [22] M.K. Anuar Sharif, A.A. Al-Abidi, S. Mat, K. Sopian, M.H. Ruslan, M.Y. Sulaiman, M.A.M. Rosli. Renewable and Sustainable Energy Reviews: Review of the application of phase change material for heating and domestic hot water systems
• [23] A.de Gracia, E.Ora, M.M. Farid, L.F. Cabeza , Thermal analysis of including phase change material in a domestic hot water cylinder, 2011; 31:3938-3945.
• [24] Abdul Jabbar N. Khalifa, Raid A. Abdul Jabbar. Energy conversion Management: Conventional Versus Storage domestic solar hot water system: a compar:ative performance study. 2010; 51: 265-270.
• [25] Murat M.Kenisarin. High –Temperature phase change materials for thermal energy storage. Renewable and sustainable energy reviews 14 (2010)955-970
• [26] V.Saikrishnan, A. Karthikeyan. Thermal behaviour study of phase change material of a latent heatstorage system/ Materials Today: Proceedings 3 (2016) 2518–2524