HEAT TRANSFER AND FRICTION CHARACTERISTICS OF AN ARRAY OF PERFORATED FINS UNDER LAMINAR FORCED CONVECTION

Year 2019, Volume: 5 Issue: 3, 115 - 122, 14.03.2019

Afshin Ahmadi Nodooshan

https://doi.org/10.18186/thermal.540007

Cited By: 1

Abstract

Three-dimensional incompressible laminar fluid flow and heat transfer of a heated array of circular perforated fins are examined numerically. The Navier–Stokes and energy equations are solved by a finite volume method using the SIMPLE algorithm. The second order upwind technique is employed to discretize the momentum and energy equations. Computations were performed for a range of Reynolds numbers 100 ≤Re ≤ 350. Thermal performance and effectiveness as well as friction coefficient of perforated and solid fins are determined for the optimum porosity. The results show that the average coefficient of friction reduces with increasing the Reynolds number and the number of perforations. The heat transfer rate increases with the porosity and the Reynolds number. It is found that perforated fin effectiveness decreases with the number of peroration at constant Reynolds numbers.

Keywords

Laminar Forced Convection, Perforated Fin, Nusselt Number, Reynolds Number, Thermal Performance

References

• [1] Q. D. Kern, D. A. Kraus. (1972). Extended surface heat transfer, New York, McGraw-Hill.
• [2] Arslanturk, C., Ozguc, A. F. (2006). Optimization of a central-heating radiator. Applied energy, 83(11), 1190-1197.
• [3] El-Sayed, S. A., Mohamed, S. M., Abdel-latif, A. A., Abdel-hamid, E. A. (2004). Experimental study of heat transfer and fluid flow in longitudinal rectangular-fin array located in different orientations in fluid flow. Experimental Thermal and Fluid Science, 29(1), 113-128.
• [4] Sahin, B., Demir, A. (2008). Performance analysis of a heat exchanger having perforated square fins. Applied Thermal Engineering, 28(5-6), 621-632.
• [5] Dhanawade, K. H., Sunnapwar, V. K., Dhanawade, H. S. (2016). Optimization of Design Parameters for Lateral Circular Perforated Fin Arrays under Forced Convection. Heat Trans. Asian Res, 45, 30–45.
• [6] Rawat, K., Patil, A. K. (2016). Heat Transfer and Friction Characteristics of Perforated Fin with a Longitudinal Slot under Forced Convection. Heat Transfer—Asian Research, 45(6), 536-555.
• [7] Saadat, H., Tavakol, M. M., Yaghoubi, M. (2014, November). Experimental study on heat transfer from a perforated fin array with cross perforations. In The 2nd Heat and Mass Transfer Conference.
• [8] Ismail, M. F., Reza, M. O., Zobaer, M. A., Ali, M. (2013). Numerical investigation of turbulent heat convection from solid and longitudinally perforated rectangular fins. Procedia Engineering, 56, 497-502.
• [9] Shaeri, M. R.,Yaghoubi, M. (2009). Numerical analysis of turbulent convection heat transfer from an array of perforated fins. International Journal of Heat and Fluid Flow, 30(2), 218-228.
• [10] Ashjaee, M., Goharkhah, M., Khadem, L. A., Ahmadi, R. (2015). Effect of magnetic field on the forced convection heat transfer and pressure drop of a magnetic nanofluid in a miniature heat sink. Heat and Mass Transfer, 51(7), 953-964.
• [11] Shaeri, M. R., Bonner, R. (2017, July). Effect of Perforation Size to Perforation Spacing on Heat Transfer in Laterally Perforated-Finned Heat Sinks. In ASME 2017 Heat Transfer Summer Conference (pp. V002T14A005-V002T14A005). American Society of Mechanical Engineers.
• [12] Wen, M. Y., Yeh, C. H. (2017). Numerical study of thermal performance of perforated circular pin fin heat sinks in forced convection. Heat and Mass Transfer, 53(6), 2031-2044.
• [13] Mohammadi, S., Ahmadi Nadooshan, A., Bayareh, M. (2017). Numerical simulation of laminar convection heat transfer from an array of circular perforated fins. Energy Equipment and Systems, 5(2), 147-156.
• [14] Bayareh, M., Pordanjani, A. H., Nadooshan, A. A., Dehkordi, K. S. (2017). Numerical study of the effects of stator boundary conditions and blade geometry on the efficiency of a scraped surface heat exchanger. Applied Thermal Engineering, 113, 1426-1436.
• [15] Maurya, R. S., Singh, S. (2017). Numerical Investigation of Isothermal Flow around Impingement Plates in a Shell and Tube Exchanger. Journal of Thermal Engineering, 3(5), 1442-1452.