EXPERIMENTAL AND COMPUTATIONAL INVESTIGATION OF FLAME HOLDERS IN COMBUSTION CHAMBERS AT DIFFERENT THERMAL LOADS

Year 2020, Volume: 6 Issue: 6 - Special Issue 12: 22nd Thermal Science and Technology Congress, 369 - 378, 01.12.2020

Mohammed Kh Abbas Alhumairi Samir Gh. Yahya Itimad D J Azzawi

https://doi.org/10.18186/thermal.833594

Cited By: 1

Abstract

The effect on the dynamic stability of combustors with and without flame holders were investigated experimentally and computationally with thermal loads of 3, 5, and 9 kW. Three different cases were studied, large flame holder (LFH), small flame holder (SFH) and no flame holder (NO_ FH). Flame topology was investigated in these three cases. Moreover, lean propane–air premixed combustion were also considered for two models, turbulent flame speed closure (TFC) and coherent flame (CFM). These models were investigated using different turbulent kinetic energies and turbulence dissipation rates. Experiments were performed with mean inlet velocities of 16.5, 17, 29.2, 30.8, and 52.6 cm/s, excess air ratios (λ) of 1.6, 1.65, 1.7, and 1.8. The results showed that the flame topology and location are more sensitive to the increase in the excess air ratios and thermal loads in the large flame holder than in the small flame holder. Heat transfers and species distributions caused by combustion are also investigated for the large and small flame holders; in both cases, flame stability was sustained, and the flame front position moved upward regarding to the flame holder region.

Keywords

Premixed Combustion, Flame Stability, Flame Holder, Thermal Loads

References

• [1] Law C. Combustion Physics. Cambridge University Press. 2006; https://doi.org/ 10.1017/ CBO97805 11754 517.
• [2] Tunçer O. Combustion in a ramjet combustor with cavity flame holder. Isi Bilim. Ve Tek. Dergisi Journal. Therm. Sci. Technol. 2010. vol. 30, no. 2, pp. 57–68.
• [3] Xavier P. Investigation of flame stabilization mechanisms in a premixed combustor using a hot gas cavity based flame holder. 2014, pp. 202.
• [4] Morsy M, Sudarma A. RANS Numerical Simulation of Lean Premixed Bluff Body Stabilized Combustor: Parametric Study. International Conference on Advances in Automotive Technologies 2016; AAT 2016. Yildiz Technical University, Istanbul, Turkey, pp.11-14.
• [5] Muppala S, Manickam B, Dinkelacker F. A Comparative Study of Different Reaction Models for Turbulent Methane/Hydrogen/Air Combustion. Journal of Thermal Engineering Yildiz Technical University Press. Istanbul, Turkey. 2015:Vol. 1, Special Issue 1, pp. 367-380.
• [6] Şener R, Özdemir M, Yangaz M. Effect Of The Geometrical Parameters In A Domestic Burner With Crescent Flame Channels For an Optimal Temperature Distribution and Thermal Efficiency. Journal of Thermal Engineering, Yildiz Technical University Press, Istanbul, Turkey 2019,Vol. 5, No. 6, Special Issue 10, pp. 171-183. https://doi.org/10.18186/thermal.654303.
• [7] Souflas K, Paterakis G, Koutmos P. Investigation of Disk-Stabilized Propane Flames Operated under Stratified and Vitiated Inlet Mixture Conditions. 2016; Journal Energy Eng., vol. 142, no. 2. https://doi.org/ 10.1061/(ASCE) EY.1943-7897.0000317.
• [8] Singh S. Experimental Simulation of Flame Holding in Air-Breathing Engines. 2016; Thesis, Beant College of Engineering and Technology, Gurdaspur, India.
• [9] Swaminathan N, Bray K. Turbulent Premixed Flames. Cambridge University Press. 2011; https://doi.org / 10.1017/CBO9780511975226
• [10] Murty K. Introduction to Combustion Phenomena. Gordon and Breach Publisher, 1993.
• [11] Kuo, Acharya. Fundamentals of Turbulent and Multiphase Combustion. 2012, John Wiley & Sons, Inc Press. https://doi.org/10.1002 /9781118107683.
• [12] Hong S, Shanbhogue S, Kedia K,Ghoniem A, Impact of the flame-holder heat-transfer characteristics on the onset of combustion instability. Combust. Sci. Technol. 2013, Vol.185, no. 10, pp. 1541–1567. https://doi.org/10.1080/00102202.2013.816575.
• [13] Kheirkhah S, Gülder Ö. Turbulent premixed combustion in V-shaped flames: Characteristics of flame front, Phys. Fluids 2013, vol. 25, no. 5. https://doi.org/10.1063/1.4807073.
• [14] Amico A, Desideri U, Fantazzi F. CFD Simulation of a Burner for Syngas Characterization: Preliminary Results and Experimental Validation. 2010; 18th Eur. Biomass Conf. Exhibit., vol. 3000, no. May, pp. 3–7.
• [15] Wu A and K. Bray K, Application of a coherent flame model to premixed turbulent combustion impinging on a wall, Combust. Sci. Technol., 1996; vol. 113, pp. 367–392. https://doi.org/10.1080 /00102209608935504.
• [16] CD-AdapcoTM, STAR-CCM +V 11_ User Guide, 2016; http://www.cd-adapco.com.
• [17] Gülder Ö, Smallwood G. Flame Surface Densities in Premixed Combustion at Medium to High turbulence Intensities. Combust. Sci. Technol. 2007; vol. 179, no. 1–2, pp. 191–206, https://doi.org 10.1080/00102200600808722.
• [18] Meneveau C, Poinsot T. Stretching and quenching of flamelets in turbulent premixed combustion. Combust. Flame. 1991, vol. 86, pp. 311–332, https://doi.org/10.1016/0010-2180(91)90126-V.
• [19] Shih T, Liou W, Shabbir A, Yang Z, Zhu J. A New K-epsilon Eddy Viscosity Model for High Reynolds Number Turbulent Flows: Model Development and Validation. Computer and Fluids. 1995; vol. 24, no. August, pp. 227–238. https://doi.org/10.1016/0045-7930(94)00032-T.
• [20] Barlow R, Smith, N, Chen J, Bilger R. Nitric Oxide Formation in Dilute Hydrogen Jet Flames: Isolation of the Effects of Radiation and Turbulence-Chemistry Submodels. Combust. Flame. 1999; 117:4-31.
• [21] Helal F, Sarh B, Gökalp I, Menou A. Comparative Study of Turbulence Modeling in Hydrogen –Air Nonpremixed Turbulent Flame. Combustion Science And Technology. 2006;178, 10-11; 1887-1909. https://doi.org/10.1080/00102200600790896.
• [22] Frank. T, Gülder Ö. Investigation of Dynamics of Lean Turbulent Premixed Flames by Rayleigh Imaging. 2009; AIAA J., vol. 47, no. 12, pp. 2964–2973. https://doi.org/10.2514/1.43255.
• [23] Mohammed KH Abbas Alhumairi, Yasseen A Almahdawi, Sami A Nawi. Flame behavior and flame location in large-eddy simulation of the turbulent premixed combustion. 2020; First accepted paper, Journal Energy.
• [24] Mohammed Kh. Abbas Alhumairi, Sami Nawi. Turbulent Premixed Combustion in SI Engine, Diyala Journal of Engineering Sciences, 2018; Vol. 11, No. 4, pp. 78-85. https:// doi.org/: 10.26367 /DJES /VOL.11/NO.4/12.
• [25] Ertunç Ö. Personal Communication, Individual Experimental Work, 2007.
• [26] Mohammed KH Abbas Alhumairi, Ertunç Ö. Active-Grid Turbulence Effect on the Topology and the Flame Location of a Lean Premixed Combustion. Thermal Science. 2018; Vol. 22, No. 6a, pp. 1-14. https://doi.org/10.2298/TSCI170503100A.
• [27] Mohammed KH Abbas Alhumairi. Investigation of Flame Characteristics in a Turbulent Premixed Combustion. 2018; PhD thesis, Ozyegin University, Istanbul, Turkey.