Experimental investigation of axial finned tube evaporator thermal distillation system using for diesel engine waste heat recovery process

Year 2024, Volume: 10 Issue: 2, 479 - 489, 22.03.2024

Satyendra Kumar Prakash Chandra

https://doi.org/10.18186/thermal.1456708

Abstract

The study aims to improve the waste thermal energy retrieval from flue gas of an internal combustion engine (ICE). The recovered waste heat energy was used for distillation by using a thermal distillation system. The performance of the thermal distillation unit was investigated by varying the evaporator (boiler) type and engine load (25, 50, 75 %). Four different types of boilers were used including one smooth copper tube and other three were two, three and four axial finned copper tube evaporators. The impact of boiler type and engine load on the net retrieved energy and exergy, net energy and exergy efficiency, and distillate yield rate of thermal distillation unit was also examined. The results showed that the net extracted heat energy and exergy for axial finned tube evaporator was approximately 26.823 – 45.513 % and 7.614 – 25.203 W higher than that of smooth tubes evaporator at 25 and 75 % engine load, respectively. The distillation yield was found to be ~ 2.35 liter/ hour in the case of four axial finned tube boiler at 75 % engine load.

Keywords

Axial Finned Tube Evaporator, Exhaust Gas, Thermal Distillation Unit, Waste Heat Recovery

References

• [1] Jouhara H, Khordehgah N, Almahmoud S, Delpech B, Chauhan A, Tassou SA. Waste heat recovery technologies and applications. Therm Sci Eng Prog 2018;6:268–289. [CrossRef]
• [2] Forman C, Muritala IK, Pardemann R, Meyer B. Estimating the global waste heat potential. Renew Sustain Energy Rev 2016;57:1568–1579. [CrossRef]
• [3] Olabi AG, Elsaid K, Sayed ET, Mahmoud MS, Wilberforce T, Hassiba RJ, et al. Application of nanofluids for enhanced waste heat recovery: A review. Nano Energy 2021;84:105871. [CrossRef]
• [4] Klemeš JJ, Kravanja Z. Forty years of heat integration: Pinch Analysis (PA) and Mathematical Programming (MP). Curr Opin Chem Eng 2013;2:461–474. [CrossRef]
• [5] Moustafa HM, Nassar MM, Abdelkareem MA, Mahmoud MS, Obaid M. Synthesis of single and bimetallic oxide-doped rGO as a possible electrode for capacitive deionization. J Appl Electrochem 2020;50:745–755. [CrossRef]
• [6] Farhat O, Faraj J, Hachem F, Castelain C, Khaled M. A recent review on waste heat recovery methodology and applications: Comprehensive review, critical analysis and potential recommendations. Clean Engineer Technol 2022;6:100387. [CrossRef]
• [7] Varshil P, Deshmukh D. A comprehensive review of waste heat recovery from a diesel engine using organic rankine cycle. Energy Reports 2021;7:3951–3970. [CrossRef]
• [8] Hussein AK. Applications of nanotechnology in renewable energies-A comprehensive overview and understanding. Renew Sustain Energy Rev 2015;42:460–476. [CrossRef]
• [9] Hussein AK, Walunj AA, Kolsi L. Applications of nanotechnology to enhance the performance of the direct absorption solar collectors. J Therm Engineer 2016;2:529–540. [CrossRef]
• [10] Hussein AK. Applications of nanotechnology to improve the performance of solar collectors – Recent advances and overview. Renew Sustain Energy Rev 2016;62:767–792. [CrossRef]
• [11] Hussein AK, Li D, Kolsi L, Kata S, Sahoo B. A review of nanofluid role to improve the performance of the heat pipe solar collectors. Energy Procedia 2017;109:417–424. [CrossRef]
• [12] Rostami S, Sepehrirad M, Dezfulizadeh A, Hussein AK, Goldanlou AS, Shadloo MS. Exergy optimization of a solar collector in flat plate shape equipped with elliptical pipes filled with turbulent nanofluid flow: a study for thermal management. Water 2020;12:2294–2310. [CrossRef]
• [13] Li D, Li Z, Zheng Y, Liu C, Hussein AK, Liu X. Thermal performance of a PCM-filled double-glazing unit with different thermophysical parameters of PCM. Solar Energy 2016;133:207–220. [CrossRef]
• [14] Liu C, Wu Y, Li D, Ma T, Hussein AK, Zhou Y. Investigation of thermal and optical performance of a phase change material filled double-glazing unit. J Build Physics 2018;42:99–119. [CrossRef]
• [15] Benabderrahmane A, Benazza A, Hussein AK. Heat transfer enhancement analysis of tube receiver for parabolic trough solar collector with central corrugated insert. J Heat Transf 2020;142:062001-1–8. [CrossRef]
• [16] Ghodbane M, Boumeddane B, Hussein AK. Performance analysis of a solar-driven ejector air conditioning system under EL-OUED climatic conditions, Algeria. J Therm Engineer 2021;7:172–189. [CrossRef]
• [17] Brough D, Jouhara H. The aluminium industry: A review on state-of-the-art technologies, environmental impacts and possibilities for waste heat recovery. Int J Thermofluids 2020;1–2:100007. [CrossRef]
• [18] Delpech B, Milani M, Montorsi L, Boscardin D, Chauhan A, Almahmoud S, et al. Energy efficiency enhancement and waste heat recovery in industrial processes by means of the heat pipe technology: Case of the ceramic industry. Energy 2018;158:656–665. [CrossRef]
• [19] Elsaid K, Taha Sayed E, Yousef BAA, Kamal Hussien Rabaia M, Ali Abdelkareem M, Olabi AG. Recent progress on the utilization of waste heat for desalination: A review. Energy Conver Manage 2020;221:113105. [CrossRef]
• [20] Huang F, Zheng J, Baleynaud JM, Lu J. Heat recovery potentials and technologies in industrial zones. J Energy Inst 2017;90:951–961. [CrossRef]
• [21] Yang MH, Yeh RH. Thermo-economic optimization of an organic Rankine cycle system for large marine diesel engine waste heat recovery. Energy 2015;82:256–268. [CrossRef]
• [22] Liu Y, Chen Y, Ming J, Chen L, Shu C, Qu T, et al. Harvesting waste heat energy by promoting H+-ion concentration difference with a fuel cell structure. Nano Energy 2019;57:101–107. [CrossRef]
• [23] Egilegor B, Jouhara H, Zuazua J, Al-Mansour F, Plesnik K, Montorsi L, et al. ETEKINA: Analysis of the potential for waste heat recovery in three sectors: Aluminium low pressure die casting, steel sector and ceramic tiles manufacturing sector. Int J Thermofluids 2020;1–2:100002. [CrossRef]
• [24] Erguvan M, MacPhee DW. Second law optimization of heat exchangers in waste heat recovery. Int J Energy Res 2019;43:5714–5734. [CrossRef]
• [25] Olabi AG, Elsaid K, Rabaia MKH, Askalany AA, Abdelkareem MA. Waste heat-driven desalination systems: Perspective. Energy 2020;209:118373. [CrossRef]
• [26] Feria-Diaz J, Lopez-Mendez M, Rodriguez-Miranda J, Sandoval-Herazo L, Correa-Mahecha F. Commercial thermal technologies for desalination of water from renewable energies: A state of the art review. Processes 2021;9:262. [CrossRef]
• [27] Dumka P, Mishra DR. Experimental investigation and thermal analysis of a double slope long still: Study of heat and mass transfer. Int J Ambient Energy 2020;43:1–15. [CrossRef]
• [28] Morciano M, Fasano M, Bergamasco L, Albiero A, Lo Curzio M, Asinari P, et al. Sustainable freshwater production using passive membrane distillation and waste heat recovery from portable generator sets. Appl Energy 2020;258:114086. [CrossRef]
• [29] Sertkaya AA, Sarı S. Experimental investigation of heat transfer depending on inclination angle of unfinned, axial finned and radial finned heat exchangers. Int J Heat Mass Transf 2021;165:120704. [CrossRef]
• [30] Krishnayatra G, Tokas S, Kumar R. Numerical heat transfer analysis & predicting thermal performance of fins for a novel heat exchanger using machine learning. Case Stud Therm Eng 2020;21:100706. [CrossRef]
• [31] Hatami M, Jafaryar M, Ganji DD, Gorji-Bandpy M. Optimization of finned-tube heat exchangers for diesel exhaust waste heat recovery using CFD and CCD techniques. Int Comm Heat Mass Transf 2014; 57: 254–263. [CrossRef]
• [32] Hatami M, Ganji DD, Gorji-Bandpy M. Experimental and numerical analysis of the optimized finned-tube heat exchanger for OM314 diesel exhaust exergy recovery. Energy Conver Manage 2015;97:26–41. [CrossRef]
• [33] Maheswari KS, Kalidasa Murugavel K, Esakkimuthu G. Thermal desalination using diesel engine exhaust waste heat - an experimental analysis. Desalination 2015;358:94–100. [CrossRef]
• [34] Holman JP. Experimental Methods for Engineers. 7th ed. New York: McGraw Hill; 2012.