Accelerated solidification of PCM via Al2O3/CuO hybrid nanoparticles in triplex tube heat storage

Year 2024, Volume: 10 Issue: 4, 880 - 903, 29.07.2024

Ibrahim E. Sadiq Sattar Aljabair Abdulhassan A. Karamallah

Abstract

The thermal performance and heat transfer augmentation of paraffin wax as a phase change material (PCM) throughout discharging process within a triplex tube heat storage have been examined using a combined experimental and numerical analysis. The efforts of this research are focused on using a blend of two different types of highly conductive nanoparticles (Al2O3/CuO hybrid nano additives) to enhance the thermal characteristics of paraffin and improve the overall performance of TTHS, which is the originality of this study. Various volume concentrations (0.4, 0.8, 1.6, 3.2%) of hybrid nanoparticles were explored. Besides that, A set of tests were carried out to evaluate the impact of changing inlet temperature and mass flow rate of the heat transfer fluid (HTF) on the phase change phenomenon of the paraffin. The mass flow rates of HTF ranges from 3 kg/min to 12 kg/min while the temperatures of HTF varies from 30 °C to 40 °C. The calculations are included an iterative, finite-volume numerical technique that involves a domain enthalpy porosity model to simulate the phase transition process. The agreement between the experimental data and the numerical simulation is good. According to the results, reducing inlet temperature and/or increase the inlet mass flow rate of HTF speed up solidification rate. However, HTF inlet temperature has more impact on solidification rate than inlet mass flow rate. Moreover, the reduction in freezing duration caused by implementing hybrid nanoparticles has been observed for all volume concentrations investigated. However, adding 3.2% volume percentage of hybrid nanoparticles results in the highest overall freezing time reduction (about 23%).

Keywords

Hybrid Nanofluid, PCM, Phase Change Material, Solidification, Triplex Tube Heat Storage

References

• [1] Dincer I, Rosen MA. Thermal Energy Storage: Systems and Applications. John Wiley & Sons; 2021. [CrossRef]
• [2] Afsharpanah F, Pakzad K, Ajarostaghi SSM, Arıcı M. Assessment of the charging performance in a cold thermal energy storage container with two rows of serpentine tubes and extended surfaces. J Energy Storage 2022;51:104464. [CrossRef]
• [3] Khudhair A, Hatem F, Mohammed Ridha D. Enhancement of thermal storage properties of phase change material by using metallic swarf. Eng Technol J 2018;36:586595. [CrossRef]
• [4] Abed AH. Thermal storage efficiency enhancement for solar air heater using a combined SHSm and PCM cylindrical capsules system: Experimental investigation. Eng Technol J 2016;34:9991011. [CrossRef]
• [5] Tawalbeh M, Khan HA, Al-Othman A, Almomani F, Ajith S. A comprehensive review on the recent advances in materials for thermal energy storage applications. Int J Thermofluids 2023;18:100326. [CrossRef]
• [6] Aljabair S, Alesbe I, Ibrahim SH. Review on latent thermal energy storage using phase change material. J Therm Eng. 2021;9:247256. [CrossRef]
• [7] Sadr AN, Shekaramiz M, Zarinfar M, Esmaily A, Khoshtarash H, Toghraie D. Simulation of mixed-convection of water and nano-encapsulated phase change material inside a square cavity with a rotating hot cylinder. J Energy Storage 2022;47:103606. [CrossRef]
• [8] Modi N, Wang X, Negnevitsky M. Solar hot water systems using latent heat thermal energy storage: perspectives and challenges. Energies 2023;16:1969. [CrossRef]
• [9] Romdhane SB, Amamou A, Khalifa RB, Said NM, Younsi Z, Jemni A. A review on thermal energy storage using phase change materials in passive building applications. J Build Engineer 2020;32:101563. [CrossRef]
• [10] Munir Z, Roman F, Niazi BMK, Mahmood N, Munir A, Hensel O. Thermal analysis of a solar latent heat storage system using Scheffler concentrator for agricultural applications. Appl Therm Engineer 2023;218:119230. [CrossRef]
• [11] Raut D, Lanjewar S, Kalamkar VR. Effect of geometrical and operational parameters on paraffin's melting performance in helical coiled latent heat storage for solar application: a numerical study. Int J Therm Sci 2022;176:107509. [CrossRef]
• [12] Yang S, Shao XF, Luo JH, Oskouei SB, Bayer Ö, Fan LW. A novel cascade latent heat thermal energy storage system consisting of erythritol and paraffin wax for deep recovery of medium-temperature industrial waste heat. Energy 2023;265:126359. [CrossRef]
• [13] Sadr AK, Sivan S, Midhun V, Behera SR. Experimental and numerical investigation of solid-solid phase change material assisted heat sink with integrated heat pipe for electronic cooling. J Energy Storage 2023;59:106494. [CrossRef]
• [14] Rathore PKS, Gupta NK, Yadav D, Shukla SK, Kaul S. Thermal performance of the building envelope integrated with phase change material for thermal energy storage: An updated review. Sustain Cities Soc 2022;79:103690. [CrossRef]
• [15] Paul J, Pandey A, Mishra YN, Said Z, Mishra YK, Ma Z, et al. Nano-enhanced organic form stable PCMs for medium temperature solar thermal energy harvesting: Recent progresses, challenges, and opportunities. Renew Sustain Energy Rev 2022;161:112321. [CrossRef]
• [16] Chang Y, Yao X, Chen Y, Zou D. Review on ceramic-based composite phase change materials: preparation, characterization and application. Compos Part B Engineer 2023;110584. [CrossRef]
• [17] Safari V, Abolghasemi H, Darvishvand L, Kamkari B. Thermal performance investigation of concentric and eccentric shell and tube heat exchangers with different fin configurations containing phase change material. J Energy Storage 2021;37:117. [CrossRef]
• [18] Sodhi GS, Muthukumar P. Compound charging and discharging enhancement in multi-PCM system using non-uniform fin distribution. Renew Energy 2021;171:299314. [CrossRef]
• [19] Ebrahimi A, Hosseini MJ, Ranjbar AA, Rahimi M, Bahrampoury R. Melting process investigation of phase change materials in a shell and tube heat exchanger enhanced with heat pipe. Renew Energy 2019;138:378394. [CrossRef]
• [20] Ling YZ, Zhang XS, Wang F, She XH. Performance study of phase change materials coupled with three-dimensional oscillating heat pipes with different structures for electronic cooling. Renew Energy 2020;154:636649. [CrossRef]
• [21] Haddad Z, Iachachene F, Sheremet MA, Abu-Nada E. Numerical investigation and optimization of melting performance for thermal energy storage system partially filled with metal foam layer: New design configurations. Appl Therm Engineer 2023;223:119809.
• [22] Righetti G, Zilio C, Longo GA, Hooman K, Mancin S. Experimental study on the effect of metal foams pore size in a phase change material based thermal energy storage tube. Appl Therm Engineer 2022;217:119163. [CrossRef]
• [23] Singh SK, Verma SK, Kumar R. Thermal performance and behavior analysis of SiO2, Al2O3 and MgO based nano-enhanced phase-changing materials, latent heat thermal energy storage system. J Energy Storage 2022;48:103977. [CrossRef]
• [24] Nie C, Deng S, Liu J, Rao Z. Performance evaluation of shell-tube latent heat storage unit using nanoparticles with cascaded concentration. J Energy Storage 2023;62:106892. [CrossRef]
• [25] Yu X, Tao Y. Improvement of thermal cycle stability of paraffin/expanded graphite composite phase change materials and its application in thermal management. J Energy Storage 2023;63:107019. [CrossRef]
• [26] Tang X, Zhang J, Wang J, Xu T, Du Y, Fan G, et al. Preparation and application of paraffin/expanded graphite-based phase change material floor for solar-heat pump combined radiant heating systems. ACS Sustain Chem Engineer 2023;11:28712884. [CrossRef]
• [27] Fikri MA, Pandey A, Samykano M, Kadirgama K, George M, Saidur R, et al. Thermal conductivity, reliability, and stability assessment of phase change material (PCM) doped with functionalized multi-wall carbon nanotubes (FMWCNTs). J Energy Storage 2022;50:104676. [CrossRef]
• [28] Li X, Zhao Y, Min X, Xiao J, Wu X, Mi R, et al. Carbon nanotubes modified graphene hybrid aerogel-based composite phase change materials for efficient thermal storage. Energy Build 2022;273:112384. [CrossRef]
• [29] Cabeza LF, Zsembinszki G, Martín M. Evaluation of volume change in phase change materials during their phase transition. J Energy Storage 2020;28:101206. [CrossRef]
• [30] Magendran SS, Khan FSA, Mubarak NM, Vaka M, Walvekar R, Khalid M, et al. Synthesis of organic phase change materials (PCM) for energy storage applications: A review. Nano-Struct Nano-Objects 2019;20:100399. [CrossRef]
• [31] Mahdi JM, Nsofor EC. Solidification enhancement of PCM in a triplex-tube thermal energy storage system with nanoparticles and fins. Appl Energy 2018;211:975986. [CrossRef]
• [32] Liu MJ, Fan LW, Zhu ZQ, Feng B, Zhang HC, Zeng Y. A volume-shrinkage-based method for quantifying the inward solidification heat transfer of a phase change material filled in spherical capsules. Appl Therm Engineer 2016;108:12001205. [CrossRef]
• [33] Ismail M, Alkhazaleh AH, Masri J, Ali AM, Ali M. Experimental and numerical analysis of paraffin waxes during solidification inside spherical capsules. Therm Sci Engineer Prog 2021;26:101095. [CrossRef]
• [34] Chen L, Wang L, Wang Y, Chen H, Lin X. Influence of phase change material volume shrinkage on the cyclic process of thermal energy storage: A visualization study. Appl Therm Engineer 2022;203:117776. [CrossRef]
• [35] Abdulateef AM, Mat S, Abdulateef J, Sopian K, Al-Abidi AA. Geometric and design parameters of fins employed for enhancing thermal energy storage systems: A review. Renew Sustain Energy Rev 2018;82:16201635. [CrossRef]
• [36] Karami R, Kamkari B. Experimental investigation of the effect of perforated fins on thermal performance enhancement of vertical shell and tube latent heat energy storage systems. Energy Conver Manage 2020;210:112679. [CrossRef]
• [37] Khan LA, Khan MM. Role of orientation of fins in performance enhancement of a latent thermal energy storage unit. Appl Therm Engineer 2020;175:115408. [CrossRef]
• [38] Yousef MS, Hassan H, Kodama S, Sekiguchi H. An experimental study on the performance of single slope solar still integrated with a PCM-based pin-finned heat sink. Energy Procedia 2019;156:100104. [CrossRef]
• [39] Liu Z, Liu Z, Guo J, Wang F, Yang X, Yan J. Innovative ladder-shaped fin design on a latent heat storage device for waste heat recovery. Appl Energy 2022;321:119300. [CrossRef]
• [40] Wu J, Li N, Wu Z. Experimental investigation of latent energy storage systems with the tree-pin-shaped fin. Appl Therm Engineer 2023;227:120370. [CrossRef]
• [41] Mahdi JM, Nsofor EC. Multiple-segment metal foam application in the shell-and-tube PCM thermal energy storage system. J Energy Storage 2018;20:529541. [CrossRef]
• [42] Hamza N, Aljabair S. Review of heat transfer enhancement using hybrid nanofluid or twisted tape insert. J Mech Engineer Res Dev 2021;44:345357.
• [43] Khan Z, Khan ZA, Sewell P. Heat transfer evaluation of metal oxides based nano-PCMs for latent heat storage system application. Int J Heat Mass Transf 2019;144:118619. [CrossRef] [44] Hosseinizadeh SF, Darzi AAR, Tan FL. Numerical investigations of unconstrained melting of nano-enhanced phase change material (NEPCM) inside a spherical container. Int J Therm Sci 2012;51:7783. [CrossRef]
• [45] Al-Jethelah M, Tasnim SH, Mahmud S, Dutta A. Melting of nano-PCM in an enclosed space: Scale analysis and heatline tracking. Int J Heat Mass Transf 2018;119:841859. [CrossRef]
• [46] Ebadi S, Tasnim SH, Aliabadi AA, Mahmud S. Melting of nano-PCM inside a cylindrical thermal energy storage system: Numerical study with experimental verification. Energy Conver Manage 2018;166:241259. [CrossRef]
• [47] Murugan P, Ganesh Kumar P, Kumaresan V, Meikandan M, Malar Mohan K, Velraj R. Thermal energy storage behaviour of nanoparticle enhanced PCM during freezing and melting. Phase Transitions 2018;91:254270. [CrossRef]
• [48] Karaipekli A, Biçer A, Sarı A, Tyagi VV. Thermal characteristics of expanded perlite/paraffin composite phase change material with enhanced thermal conductivity using carbon nanotubes. Energy Conver Manage 2017;134:373381. [CrossRef]
• [49] Gorzin M, Hosseini MJ, Rahimi M, Bahrampoury R. Nano-enhancement of phase change material in a shell and multi-PCM-tube heat exchanger. J Energy Storage 2019;22:8897. [CrossRef]
• [50] Hamza N, Aljabair S. Numerical and experimental investigation of heat transfer enhancement by hybrid nanofluid and twisted tape. Eng Technol J 2022;41:6985. [CrossRef]
• [51] Khan Z, Khan ZA. Experimental and numerical investigations of nano-additives enhanced paraffin in a shell-and-tube heat exchanger: A comparative study. Appl Therm Engineer 2018;143:777790. [CrossRef]
• [52] Hamali W, Almusawa MY. Transient heat transfer of NEPCM during solidification using Galerkin method. Case Stud Therm Engineer 2022;35:102114. [CrossRef]
• [53] Rothan YA. Thermal analysis for solidification of PCM including nanoparticles within a container. Case Stud Therm Engineer 2022;33:101920. [CrossRef]
• [54] Zhao C, Tao Y, Yu Y. Thermal conductivity enhancement of phase change material with charged nanoparticle: A molecular dynamics simulation. Energy 2022;242:123033. [CrossRef]
• [55] Wu Y, Rong J, Wang D, Zhao X, Meng L, Arıcı M, et al. Synergistic enhancement of heat transfer and thermal storage characteristics of shell and tube heat exchanger with hybrid nanoparticles for solar energy utilization. J Clean Prod 2023;387:135882. [CrossRef]
• [56] Karami R, Kamkari B. Investigation of the effect of inclination angle on the melting enhancement of phase change material in finned latent heat thermal storage units. Appl Therm Engineer 2019;146:4560. [CrossRef]
• [57] Martínez A, Carmona M, Cortés C, Arauzo I. Experimentally based testing of the enthalpy-porosity method for the numerical simulation of phase change of paraffin-type PCMs. J Energy Storage 2023;69:107876. [CrossRef]
• [58] Seddegh S, Wang X, Henderson AD. A comparative study of thermal behaviour of a horizontal and vertical shell-and-tube energy storage using phase change materials. Appl Therm Engineer 2016;93:348358. [CrossRef]
• [59] Voller VR, Cross M, Markatos N. An enthalpy method for convection/diffusion phase change. Int J Numer Methods Engineer 1987;24:271284. [CrossRef]
• [60] Afsharpanah F, Izadi M, Hamedani FA, Mousavi Ajarostaghi SS, Yaïci W. Solidification of nano-enhanced PCM-porous composites in a cylindrical cold thermal energy storage enclosure. Case Stud Therm Engineer 2022;39:102421. [CrossRef]
• [61] Sheikholeslami M. Numerical analysis of solar energy storage within a double pipe utilizing nanoparticles for expedition of melting. Sol Energy Mater Sol Cells 2022;245:111856. [CrossRef]
• [62] Li Z, Shahsavar A, Al-Rashed AAA, Talebizadehsardari P. Effect of porous medium and nanoparticles presences in a counter-current triple-tube composite porous/nano-PCM system. Appl Therm Engineer 2020;167:114777. [CrossRef]
• [63] Mourad A, Aissa A, Abed AM, Smaisim GF, Toghraie D, Fazilati MA, et al. The numerical analysis of the melting process in a modified shell-and-tube phase change material heat storage system. J Energy Storage 2022;55:105827. [CrossRef]
• [64] Bellos E, Tzivanidis C. Thermal analysis of parabolic trough collector operating with mono and hybrid nanofluids. Sustain Energy Technol Assess 2018;26:105115. [CrossRef]
• [65] Khanafer K, Vafai K. A critical synthesis of thermophysical characteristics of nanofluids. Int J Heat Mass Transf 2011;54:44104428. [CrossRef]
• [66] Batchelor G. The effect of Brownian motion on the bulk stress in a suspension of spherical particles. J Fluid Mech 1977;83:97117. [CrossRef]
• [67] Amani M, Amani P, Kasaeian A, Mahian O, Wongwises S. Thermal conductivity measurement of spinel-type ferrite MnFe2O4 nanofluids in the presence of a uniform magnetic field. J Mol Liq 2017;230:121128. [CrossRef]
• [68] Elsayed AO. Numerical study on performance enhancement of solid–solid phase change materials by using multi-nanoparticles mixtures. J Energy Storage 2015;4:106112. [CrossRef]
• [69] Arasu AV, Mujumdar AS. Numerical study on melting of paraffin wax with Al2O3 in a square enclosure. Int Commun Heat Mass Transf 2012;39:816. [CrossRef]
• [70] Alawi OA, Sidik NAC, Xian HW, Kean TH, Kazi SN. Thermal conductivity and viscosity models of metallic oxides nanofluids. Int J Heat Mass Transf 2018;116:13141325. [CrossRef]
• [71] Vajjha RS, Das DK. Experimental determination of thermal conductivity of three nanofluids and development of new correlations. Int J Heat Mass Transf. 2009;52:46754682. [CrossRef]
• [72] Daood IY. Effects of nano-fluids types, volume fraction of nano-particles, and aspect ratios on natural convection heat transfer in right-angle triangular enclosure. Engineer Technol J 2010;28:53655388. [CrossRef]
• [73] Brent A, Voller VR, Reid K. Enthalpy-porosity technique for modeling convection-diffusion phase change: application to the melting of a pure metal. Numer Heat Transf Part A Appl 1988;13:297318. [CrossRef]
• [74] Al-Musawi AIA, Taheri A, Farzanehnia A, Sardarabadi M, Passandideh-Fard M. Numerical study of the effects of nanofluids and phase-change materials in photovoltaic thermal (PVT) systems. J Therm Anal Calorim 2018;137:623636. [CrossRef]
• [75] Patankar S. Numerical Heat Transfer and Fluid Flow. Washington, DC: Hemisphere; 1980.
• [76] Leonard BP. A stable and accurate convective modelling procedure based on quadratic upstream interpolation. Comput Methods Appl Mech Engineer 1979;19:5998. [CrossRef]
• [77] Sivaiah S, Murali G, Reddy M, Raju RS. Unsteady MHD mixed convection flow past a vertical porous plate in presence of radiation. Int J Basic Appl Sci 2012;1:651666. [CrossRef]
• [78] Murali G, Paul A, Babu N. Numerical study of chemical reaction effects on unsteady MHD fluid flow past an infinite vertical plate embedded in a porous medium with variable suction. Electron J Math Anal Appl 2015;3:179192. [CrossRef]
• [79] Gadipally D, Gundagani M. Analysis of soret and dufour effects on unsteady MHD convective flow past a semi-infinite vertical porous plate via finite difference method. Int J Appl Phys Math 2014;4:332344. [CrossRef]
• [80] Deepa G, Murali G. Effects of viscous dissipation on unsteady MHD free convective flow with thermophoresis past a radiate inclined permeable plate. Iran J Sci Technol (Sci) 2014;38:379388.
• [81] Sari A, Kaygusuz K. Thermal performance of a eutectic mixture of lauric and stearic acids as PCM encapsulated in the annulus of two concentric pipes. Sol Energy 2002;72:493504. [CrossRef]