Spark ignition engine performance analysis with low octane gasoline and Methyl tert-butyl ether additive for optimum operation

Year 2024, Volume: 10 Issue: 4, 911 - 923, 29.07.2024

Obed Majeed Ali

Abstract

Fuel quality is considered an important indicator for ensuring maximum output power. Hence, using commercial fuel that didn’t meet the standard specifications may result in engine performance deterioration. In this study, Methyl tert-butyl ether additive has been introduced as an octane enhancer with local low-octane gasoline. Five samples were prepared by adding MTBE additive at 3%, 6%, 9%, 12% and 15% to commercial gasoline and tested at constant half load and increasing engine speed. Response surface method optimization and ANOVA analysis have been conducted using the obtained engine test results to indicate the optimum engine performance conditions and the significance of the variations respectively. Optimization results show that the output responses are linked statistically with the engine speed. The optimum operation conditions obtained at an engine speed of 3126 rpm and 3% additive ratio by 2356 W for brake power, 0.187857 g/W.hr for brake-specific fuel consumption and 38.3% for the brake thermal efficiency. According to the chosen significant level, ANOVA results shows significant influence of engine speed on the different obtained responses, On the other hand, the optimum response achieved at 3% additive ratio with insignificant influence for increasing additive ratio in the fuel mix.

Keywords

Design of Experiment, Fuel Additives, Gasoline, Methyl Tertbutyl Ether, Octane Number, Optimization

References

• [1] Shankar S, Astagi HV, Hebbal O, Hotti SR. Effect of exhaust gas recirculation (EGR) on performance, emissions and combustion characteristics of a low heat rejection (LHR) diesel engine using pongamia biodiesel. J Therm Engineer 2016;2:10071016. [CrossRef]
• [2] Karagöz Y. Emissions and performance characteristics of an SI engine with biogas fuel at different CO2 ratios. J Therm Engineer 2019;5:131140. [CrossRef]
• [3] Örs İ, Sayin B, Çiniviz M. An experimental study on the comparison of the methanol addition into gasoline with the addition of ethanol. Int J Automot Sci Technol 2020;4:5969. [CrossRef]
• [4] Rajak U, Nashine P, Verma TN. Comparative assessment of the emission characteristics of first, second and third generation biodiesels as fuel in a diesel engine. J Therm Engineer 2020;6:211225. [CrossRef]
• [5] Doori WHA, Ali OM, Ahmed AH, Koten H. Comparative study of biodiesel production from different waste oil sources for optimum operation conditions and better engine performance. J Therm Engineer 2022;8:457465. [CrossRef]
• [6] Antony AG, Rajaguru K, Dinesh S, Radhakrishnan K, Parameswaran P, Saravanan K. Analysis of compression ignition engine characteristics with addition of MTBE with diesel. Mater Today Proc 2020;37:11541157. [CrossRef]
• [7] Yang Q, Shao S, Zhang Y, Hou H, Qin C, Sun D, et al. Comparative study on life cycle assessment of gasoline with methyl tertiary-butyl ether and ethanol as additives. Sci Total Environ 2020;724:138130. [CrossRef]
• [8] Jeevanantham AK, Nanthagopal K, Ashok B, Al-Muhtaseb AH, Thiyagarajan S, Geo VE, et al. Impact of addition of two ether additives with high speed diesel-Calophyllum Inophyllum biodiesel blends on NOx reduction in CI engine. Energy 2019;185:3954. [CrossRef]
• [9] Johnson R, Pankow J, Bender D, Price CZ. Peer reviewed: MTBE-to what extent will past releases contaminate community water supply wells. Environ Sci Technol 2000;34:210A217A. [CrossRef]
• [10] Achten C, Kolb APW. Methyl tert-butyl ether (MTBE) in urban and rural precipitation in Germany. Atmos Environ 2001;35:63376345. [CrossRef]
• [11] Da Silva R, Cataluña R, Menezes EWD, Samios D, Piatnicki CMS. Effect of additives on the antiknock properties and Reid vapor pressure of gasoline. Fuel 2005;84:951959. [CrossRef]
• [12] Sezer I, Bilgin A. Effects of methyl tert-butyl ether addition to base gasoline on the performance and CO emissions of a spark ignition engine. Energy Fuels 2008;22:13411348. [CrossRef]
• [13] Douihit WH, Davis BC, Steinke EDL, Doherty HM. Performance features of 15% MTBE/gasoline blends. SAE Tech Pap 1988;881667. [CrossRef]
• [14] Balki MK, Temur M, Erdoğan S, Sarıkaya M, Sayin C. The determination of the best operating parameters for a small SI engine fueled with methanol gasoline blends. Sustain Mater Technol 2021;30:e00340. [CrossRef]
• [15] Hsieh WD, Chen RH, Wu TL, Lin TH. Engine performance and pollutant emission of an SI engine using ethanol-gasoline blended fuels. Atmos Environ 2002;36:403410. [CrossRef]
• [16] Porpatham E, Ramesh A, Nagalingam B. Investigation on the effect of concentration of methane in biogas when used as a fuel for a spark ignition engine. Fuel 2008;87:16511659. [CrossRef]
• [17] Sheet EAE. Relative change in SI engine’s emission and performance parameters using new locally made octane enhancer. Pet Res Stud 2017:124. [CrossRef]
• [18] Alptekin E, Canakci M. Performance and emission characteristics of solketal-gasoline fuel blend in a vehicle with spark ignition engine. Appl Therm Engineer 2017;124:504509. [CrossRef]
• [19] Kolakoti A, Mosa PR, Kotaru TG, Mahapatro M. Optimization of biodiesel production from waste cooking sunflower oil by Taguchi and ANN techniques. J Therm Engineer 2020;6:712723. [CrossRef]
• [20] Joshi T, Parkash O, Krishan G. Estimation of energy consumption and transportation characteristics for slurry flow through a horizontal straight pipe using computational fluid dynamics. Phys Fluids 2023;35:53303. [CrossRef]
• [21] Joshi T, Parkash O, Krishan G. CFD modeling for slurry flow through a horizontal pipe bend at different Prandtl number. Int J Hydrogen Energy 2022;47:2373123750. [CrossRef]
• [22] Joshi T, Parkash O, Krishan G, Murthy AA. Numerical investigation of bi-model slurry transportation through horizontal pipe bend. Powder Technol 2023;418:118284. [CrossRef]
• [23] Abdalla AN, Tao H, Bagaber SA, Ali OM, Kamil M, Ma X, et al. Prediction of emissions and performance of a gasoline engine running with fusel oil-gasoline blends using response surface methodology. Fuel 2019;253:114. [CrossRef]
• [24] Safieddin Ardebili SM, Solmaz H, Mostafaei M. Optimization of fusel oil-gasoline blend ratio to enhance the performance and reduce emissions. Appl Therm Engineer 2019;148:13341345. [CrossRef]
• [25] Abdalla AN, Ali OM, Awad OI, Tao H. Wavelet analysis of an SI engine cycle-to-cycle variations fuelled with the blending of gasoline-fusel oil at a various water content. Energy Conver Manage 2019;183:746752. [CrossRef]
• [26] Awad OI, Ali OM, Hammid AT, Mamat R. Impact of fusel oil moisture reduction on the fuel properties and combustion characteristics of SI engine fueled with gasoline-fusel oil blends. Renew Energy 2018;123:7991. [CrossRef]
• [27] Saxena V, Kumar N, Saxena VK. Multi-objective optimization of modified nanofluid fuel blends at different TiO2 nanoparticle concentration in diesel engine: Experimental assessment and modeling. Appl Energy 2019;248:330353. [CrossRef]
• [28] Awad OI, Mamat R, Ali OM, Sidik NAC, Yusaf T, Kadirgama K, et al. Alcohol and ether as alternative fuels in spark ignition engine: A review. Renew Sustain Energy Rev 2018;82:25862605. [CrossRef]
• [29] Safieddin Ardebili SM, Solmaz H, İpci D, Calam A, Mostafaei M. A review on higher alcohol of fusel oil as a renewable fuel for internal combustion engines: Applications, challenges, and global potential. Fuel 2020;279:118516. [CrossRef]
• [30] Yusri IM, Abdul Majeed APP, Mamat R, Ghazali MF, Awad OI, Azmi WH. A review on the application of response surface method and artificial neural network in engine performance and exhaust emissions characteristics in alternative fuel. Renew Sustain Energy Rev 2018;90:665686. [CrossRef]
• [31] Mehmood T, Ahmed A, Ahmad A, Ahmad MS, Sandhu MA. Optimization of mixed surfactants-based β-carotene nanoemulsions using response surface methodology: An ultrasonic homogenization approach. Food Chem 2018;253:179184. [CrossRef]
• [32] Kunduru SR, Venkata HRY, Vallapudi D, Deenadayalan N, Kumaravel AR. Prediction of recital characteristics of a CI diesel engine operated by bio-fuel extracts from cotton seed oil, linseed oil and mahua seed oil using ANN method. J Therm Engineer 2023;9:366376. [CrossRef]
• [33] Safieddin Ardebili SM, Solmaz H, Calam A, İpci D. Modelling of performance, emission, and combustion of an HCCI engine fueled with fusel oil-diethylether fuel blends as a renewable fuel. Fuel 2021;290:120017. [CrossRef]
• [34] Solmaz H, Ardebili SMS, Calam A, Yılmaz E, İpci D. Prediction of performance and exhaust emissions of a CI engine fueled with multi-wall carbon nanotube doped biodiesel-diesel blends using response surface method. Energy 2021;227:120518. [CrossRef]
• [35] Yaman H, Yesilyurt MK. The influence of n-pentanol blending with gasoline on performance, combustion, and emission behaviors of an SI engine. Engineer Sci Technol Int J 2021;24:13291346. [CrossRef]
• [36] Monroe E, Shinde S, Carlson JS, Eckles TP, Liu F, Varman AM, et al. Superior performance biodiesel from biomass-derived fusel alcohols and low grade oils: Fatty acid fusel esters (FAFE). Fuel 2020;268:117408. [CrossRef]
• [37] Ağbulut Ü, Yeşilyurt MK, Sarıdemir S. Wastes to energy: Improving the poor properties of waste tire pyrolysis oil with waste cooking oil methyl ester and waste fusel alcohol—A detailed assessment on the combustion, emission, and performance characteristics of a CI engine. Energy 2021;222:119942. [CrossRef]
• [38] Simsek S, Uslu S. Experimental study of the performance and emissions characteristics of fusel oil/gasoline blends in spark ignited engine using response surface methodology. Fuel 2020;277:118182. [CrossRef]
• [39] Awad OI, Mamat R, Ali OM, Azmi WH, Kadirgama K, Yusri IM, et al. Response surface methodology (RSM) based multi-objective optimization of fusel oil-gasoline blends at different water content in SI engine. Energy Conver Manage 2017;150:222241. [CrossRef]