DESIGN OF PASSIVE HARMONIC FILTER FOR THE CLAW-POLE SYNCHRONOUS GENERATORS UNDER NON-LINEAR LOADING

Year 2025, Volume: 24 Issue: 47, 284 - 302, 30.06.2025

Yusuf Toprak , Oktay Karakaya , Şevket Cantürk , Murat Balcı

https://doi.org/10.55071/ticaretfbd.1600837

Cited By: 1

https://izlik.org/JA84XR43ZN

Abstract

In this study, firstly, the harmonic distortions of terminal voltage and current of a three-phase 1,5 kVA, 150V, 50 Hz, and four poles permanent magnet excited Claw Pole Synchronous Generator (CPSG) supplying a 6-pulse rectifier load are simulated using its 3D Finite Element Model (FEM) in Ansys Maxwell software environment. Then, various low-pass passive filters are designed with a practical approach to reduce the terminal voltage and winding current harmonics in the analysis system. Finally, the terminal voltage and current harmonic distortions, losses, torque oscillations, and efficiency of the modelled CPSG are evaluated when the designed filter is connected to the system. According to the numerical results obtained, the best-performing filter among the designed ones is determined. It is also concluded that with the help of this best-performing filter, the terminal voltage harmonic distortion, losses, torque oscillations, and efficiency of the CPSG are considerably improved.

Keywords

Claw pole synchronous generator , low-pass passive filter , nonlinear load , filter design

PENÇE-KUTUPLU SENKRON GENERATÖRLER İÇİN DOĞRUSAL OLMAYAN YÜKLEME ALTINDA PASİF HARMONİK FİLTRE TASARIMI

https://izlik.org/JA84XR43ZN

Abstract

Bu çalışmada, ilk olarak, 1,5 kVA, 150V, 50 Hz, dört kutuplu, kalıcı mıknatıs ile uyarılmış Pençe Kutuplu Senkron Generatörün (PKSG), 6 darbeli doğrultucu yükü beslerken terminal gerilimi ve akımındaki harmonik bozulmalarının 3 Boyutlu Sonlu Elemanlar Modeli (SEM) kullanılarak Ansys Maxwell yazılım ortamında simülasyonu gerçekleştirilmiştir. Daha sonra, analiz sistemindeki terminal gerilimi ve sargı akımı harmoniklerini azaltmak için pratik bir yaklaşımla çeşitli alçak geçiren pasif filtreler tasarlanmıştır. Son olarak, tasarlanan filtrelerin sisteme bağlanması durumunda, modellenen PKSG'nin terminal gerilimi ve akım harmonik bozulmaları, kayıpları, tork dalgalanması ve verimi değerlendirilmiştir. Elde edilen sayısal sonuçlardan, tasarlanan filtreler arasında en iyi performansa sahip olan belirlenmiştir. Ayrıca, bu en iyi performansa sahip filtre yardımıyla PKSG'nin terminal gerilim harmonik bozulması, kayıpları, tork dalgalanması ve veriminin dikkate değer ölçüde iyileştirildiği sonucuna varılmıştır.

Keywords

pençe kutuplu senkron generatör , Alçak geçiren pasif filtre , doğrusal olmayan yük , filtre tasarımı

References

• Adak, S. (2021). Harmonics mitigation of stand-alone photovoltaic system using LC passive filter. Journal of Electrical Engineering & Technology, 16(5), 2389-2396.
• ANSYS. (2020). Ansys Maxwell Getting Started Module 1: Basics. ANSYS Innovation Courses. Retrieved July 10, 2021, from https://www.courses.ansys.com/wpcontent/uploads/2021/07/MAXW_GS_2020R2_EN_LE01.pdf.
• Artal-Sevil, J. S., Dufo, R., Astaneh, M., Domínguez, J. A., & Bernal-Agustín, J. L. (2018). Development of a small wind turbine for stand-alone system in rural environment. Reuse and recycling of electric motors. Renewable Energy and Power Quality Journal (RE&PQJ), 1(16), 745-750.
• Balcı, S. (2024). Pençe-Kutuplu Senkron Generatörlerde Yeni Nesil Çekirdek Malzemelerin Kullanımıyla Performans Artışı. Muş Alparslan Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 5(2), 20-38.
• Balci, M. E., & Hocaoglu, M. H. (2009, November). Comparative review of multi-phase apparent power definitions. In 2009 International Conference on Electrical and Electronics Engineering-ELECO 2009, I-144. IEEE.
• Bao, X. H., & Liu, M. Z. (2012). Parameter analysis and optimal design for mobile Claw-pole alternator. Applied Mechanics and Materials, 130, 658-661.
• Cao, Y., Zhu, S., Yu, J., & Liu, C. (2022). Optimization design and performance evaluation of a hybrid excitation claw pole machine. Processes, 10(3), 541.
• Cantürk, Ş., Karakaya, O., Balci, M. E., & Aleem, S. H. A. (2024). Introductory chapter: effects of power quality problems on energy efficiency of power systems. Energy Efficiency of Modern Power and Energy Systems (pp. 1-17). Elsevier.
• Donolo, P., Bossio, G., De Angelo, C., García, G., & Donolo, M. (2016). Voltage unbalance and harmonic distortion effects on induction motor power, torque and vibrations. Electric power systems research, 140, 866-873.
• Fuchs, E. F., & Masoum, M. A. (2011). Power quality in power systems and electrical machines. Academic press.
• Geng, H., Zhang, X., Zhang, Y., Hu, W., Lei, Y., Xu, X., ... & Shi, L. (2020). Development of brushless claw Pole electrical excitation and combined permanent magnet hybrid excitation generator for vehicles. Energies, 13(18), 4723.
• Hagstedt, D., Reinap, A., Ottosson, J., & Alaküla, M. (2012, September). Design and experimental evaluation of a compact hybrid excitation claw-pole rotor. In 2012 XXth International Conference on Electrical Machines. (pp. 2896-2901).
• Jurca, F. N. (2016, July). Design of a low-cost permanent synchronous machine for isolated wind conversion systems. In Wind Turbines-Des., Control and Appl. 95-120. IntechOpen.
• Jurca, F., Martis, C., & Biro, K. (2009, June). Comparative analysis of the claw-pole rotor dimensions influence on the performances of a claw-pole generator for wind applications. In 2009 International Conference on Clean Electrical Power. (pp. 715-720).
• Jurca, F., Martis, C., Birou, I., & Biro, K. (2008, May). Analysis of permanent magnet claw-pole synchronous machine. In 2008 11th International Conference on Optimization of Electrical and Electronic Equipment. (pp. 75-80).
• Karadeniz, A., & Balci, M. E. (2018). Comparative evaluation of common passive filter types regarding maximization of transformer’s loading capability under non-sinusoidal conditions. Electric Power Systems Research, 158, 324-334.
• Lequesne, B. (2015). Automotive electrification: The nonhybrid story. IEEE Transactions on Transportation Electrification, 1(1), 40-53.
• Li, B., Li, X., Wang, S., Liu, R., Wang, Y., & Lin, Z. (2022). Analysis and cogging torque minimization of a novel flux reversal claw pole machine with soft magnetic composite cores. Energies, 15(4), 1285.
• Omri, R., Ibala, A., & Masmoudi, A. (2018, April). 3D-FEA based-comparison of different topologies of claw-pole alternators with a dual excitation. In 2018 Thirteenth International Conference on Ecological Vehicles and Renewable Energies (EVER). 1-6.
• Omri, R., Ibala, A., & Masmoudi, A. (2018, April). Characterization on the no-and on-load operations of an improved claw pole machine. In 2018 Thirteenth International Conference on Ecological Vehicles and Renewable Energies (EVER). (pp. 1-8).
• Phyo, S. P., & Aung, T. H. (2014). Wind turbine generation system implemented with a claw pole alternator. International Journal of Scientific Engineering and Technology Research, 3(16), 3411-3416.
• Pillai, K. P. P., Idiculla, M. K., & Nair, A. S. (2006). Spectral study on the voltage waveform of claw pole automotive alternator. European Council for Modeling and Simulation, 456-461.
• Rosu, M., Zhou, P., Lin, D., Ionel, D. M., Popescu, M., Blaabjerg, F., ... & Staton, D. (2017). Multiphysics simulation by design for electrical machines, power electronics and drives. John Wiley & Sons.
• Shuguang, Z., Xiaorui, H., Yaodan, Z., & Shuanglong, W. (2019). Rotor shape optimization of claw-pole alternator to reduce acoustic noise caused by electromagnetic forces. IEEE Transactions on Energy Conversion, 34(4), 2118-2125.
• Singh, G. K. (2009). Power system harmonics research: a survey. European Transactions on Electrical Power, 19(2), 151-172.
• Tan-Kim, A., Hagen, N., Lanfranchi, V., Clénet, S., Coorevits, T., Mipo, J. C., ... & Palleschi, F. (2017). Influence of the manufacturing process of a claw-pole alternator on its stator shape and acoustic noise. IEEE Transactions on Industry Applications, 53(5), 4389-4395.
• Tan-Kim, A., Lanfranchi, V., Legranger, J., Palleschi, F., & Redon, M. (2014, September). Influence of temperature on the vibro-acoustic behavior of claw-pole alternators. In 2014 International Conference on Electrical Machines (ICEM). (pp. 1628-1634).
• Tikhonova, O., Malygin, I., Beraya, R., Sokolov, N., & Plastun, A. (2017). Loss calculation of induction motor with ring windings by “ANSYS Maxwell”. APEET, 2017, 63-66.
• Toprak, Y., Karakaya, O., Cantürk, Ş., & Balcı, M. E. (2023, December). Analysis on Performance of Claw Pole Synchronous Generators for 6-Pulse Rectifier Load. 4th International Turkish World Engineering and Science Congress, (pp. 361–371).
• Toprak, Y. (2023). Performance analysis of claw pole synchronous generator under non-linear loading conditions [Master's thesis]. Balikesir University.
• Toprak, Y., Karakaya, O., Canturk, S., & Balci, M. E. (2024, July). Design of Passive Harmonic Filter for the Claw-Pole Synchronous Generators under Non-linear Loading. The Third International Conference on Applied Mathematics in Engineering (ICAMƩ’24). (pp. 113).
• Whaley, D. M., Soong, W. L., & Ertugrul, N. (2004, September). Extracting more power from the Lundell car alternator. In Australasian Universities Power Engineering Conference (AUPEC 2004). 26-29.
• Wu, S., & Zuo, S. (2018). Characteristics analysis of electromagnetic force and noise of claw pole alternators with different pole and slot combinations and phase number. IET Electric Power Applications, 12(9), 1357-1364.
• Yang, F., Bao, X., Di, C., & Chen, Z. (2015, October). Simulation and experiment on reducing electromagnetic vibration and noise of claw-pole alternators. In 2015 18th International Conference on Electrical Machines and Systems (ICEMS). (pp. 1452-1458).
• Ye, C., Liang, X., Xiong, F., Yang, J., Xu, W., & Liu, Y. (2018). Design of an axial-flux PM-assisted claw-pole generator based on an equivalent magnetic circuit model. IEEE Transactions on Energy Conversion, 33(4), 2040-2049.
• Zhang, Z., Liu, H., & Song, T. (2016). Optimization design and performance analysis of a PM brushless rotor claw pole motor with FEM. Machines, 4(3), 15.
• Zhao, X., Niu, S., & Ching, T. W. (2018). Design and analysis of a new brushless electrically excited claw-pole generator for hybrid electric vehicle. IEEE Transactions on Magnetics, 54(11), 1-5.
• Zubi, H. (2005). Lowpass broadband harmonic filter design [Master's thesis]. Middle East Technical University.