EFFECT OF PROPELLERS NUMBERS AND HORIZONTAL DISTANCE IN DESIGN OF VTOL

Year 2022, Volume: 5 Issue: 1, 23 - 27, 30.06.2022

Mustafa Varki Eyüp Yeter Mehmet Hanifi Doğru

Abstract

Nowadays, unmanned aerial vehicles with vertical take-off and landing (VTOL) capabilities are increasing. One of the reasons is that these vehicles can take off and land even in difficult conditions and does not need any runway. In design stages of unmanned aerial vehicles, certain design criteria are taken into consideration. VTOL vehicles, which are divided into tilt-wing or tilt rotor, used in areas such as operation areas, efficiency and cost advantage. In this study, CFD analysis is performed to determine the optimum configuration of the VTOL vehicle by considering the horizontal distance between the propellers and the number of propellers of a tilt-wing unmanned aerial vehicle. For this aim, effect of aerodynamic parameters such as thrust, velocity etc. of propellers are investigated. As a result of this study, the suitable propeller position on the wing and number of propellers for the VTOL vehicle are determined.

Keywords

VTOL, Propeller, Aerodynamic Parameters, Flow Analysis

References

• The Wikipedia website. [Online]. Available: https://en.wikipedia.org/wiki/Propeller (accessed on 2 November 2021).
• S.Baskaran.; L.Dhineshraj.; J.Dinesh.; B.Dineshkumar.; T.Dineshkumar., Design and Flow Analysis of Marine Propeller using Computational Fluid Dynamics, International Journal of Research and Scientific Innovation,2019,56-58.
• Subhas, S., Saji, V. F., Ramakrishna, S., & Das, H. N. (2012). CFD analysis of a propeller flow and cavitation. International Journal of Computer Applications, 55(16).
• Patil, V., Purushothama, H., Manjunatha, A., & Mishra, V. K. (2016). Performance Evaluation of Marine Propeller using Numerical Simulation. Indian Journal of Science and Technology, 9(45).
• Kutty, H. A., & Rajendran, P. (2017). 3D CFD simulation and experimental validation of small APC slow flyer propeller blade. Aerospace, 4(1), 10.
• Seo, J. H., Seol, D. M., Lee, J. H., & Rhee, S. H. (2010). Flexible CFD meshing strategy for prediction of ship resistance and propulsion performance. International Journal of Naval Architecture and Ocean Engineering, 2(3), 139-145.
• İbrahim, G. Ö. V. Rotor Spacing and Blade Number Effect on the Thrust, Torque and Power of a Coaxial Rotor. El-Cezeri Journal of Science and Engineering, 7(2), 487-502.
• Doğru, M. H., Güzelbey, İ. H., & Göv, İ. (2016). Ducted Fan Effect on the Elevation of a Concept Helicopter When the Ducted Faintail Is Located in a Ground Effect Region. Journal of Aerospace Engineering, 29(1), 04015030.
• Hong, F. W., & Dong, S. T. (2010). Numerical analysis for circulation distribution of propeller blade. Journal of Hydrodynamics, Ser. B, 22(4), 488-493.
• Zhang, C., Xie, S., & Qin, T. (2016, April). Aerodynamic analysis of small propeller in wind field using CFD. In Proceedings of the 2015 4th International Conference on Sustainable Energy and Environmental Engineering.
• Oktay, T., & Eraslan, Y. (2020). Computational fluid dynamics (Cfd) investigation of a quadrotor UAV propeller. In International Conference on Energy, Environment and Storage of Energy (ICEESEN 2020) (pp. 1-5).
• Simutech group website. [Online]. Available: https://simutechgroup.com/why-is-meshing-important-for-fea-fluid-simulations/ (accessed on 2 November 2021).
• Brandt, J., & Selig, M. (2011, January). Propeller performance data at low reynolds numbers. In 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition (p. 1255).
• Deters, R. W., Ananda Krishnan, G. K., & Selig, M. S. (2014). Reynolds number effects on the performance of small-scale propellers. In 32nd AIAA applied aerodynamics conference (p. 2151).