The Usage of 3D Technologies in Assessment of Body Fitting of Clothing

Abstract

3 boyutlu (3B) teknolojilerin üretim öncesi hazırlık sürecinde kullanılması hazır giyim üreticilerinin kısa zamanda, düşük maliyetle kaliteli üretim yapmalarını sağlayarak, Dünya pazarında rekabet edebilme yeteneklerini arttırmaktadır. Gerçekleştirilen çalışmada, hazır giyim sektöründe üretim öncesi hazırlık döneminde 3B teknolojilerin kullanılabilirliği araştırılmıştır. Giysinin vücuda uyumu sanal manken üzerinde değerlendirilmiştir. 3B ölçeklendirilmiş numunelerin üretimi sırasında 3 boyutlu yazıcı kullanılmıştır.

Keywords

• Kalıp hazırlama,3B sanal manken,3B Yazıcı,3B Sanal Giydirme,3B Sanal Giydirme,Vücut Uyumu

The Usage of 3D Technologies in Assessment of Body Fitting of Clothing

Abstract

The use of 3 dimensional (3D) technologies in the pre-production preparation process enables apparel manufacturers to produce quality products at a low cost in a short time and increases their ability to compete in the World economy. In this study, the usability of 3D technologies in the apparel sector during the pre-production preparation period was investigated. The fit evaluation of garment was done on virtual manikin. A 3D printer is used for creating the 3D scaled garment samples.

Keywords

• Pattern preparing,3D virtual manikin,3D printing,3D virtual garment simulation,Body fitting

References

1. Berman B, 2012. “3-D printing: The new industrial revolution”, Business Horizons, pp.55,155-162.
2. Chong S, Chiu HL, Liao YC, Hung ST, Pan GT, 2015. “Cradle to Cradle® Design for 3D Printing”, Chemical Engineering Transactions, Vol.45, pp.1668-1674.
3. Fonda C, 2013, “A Practical Guide to Your First 3D Print” in, Canessa, E, Fonda C, Zennaro M, “Low-Cost 3D Printing for Science”, Education&Sustainable Development. ICTP-The Abdus Salam International Centre for Theoretical Physics, p.202.
4. Kalva RS, 2015. “3D Printing–The Future of Manufacturing (The Next Industrial Revolution)”, International Journal of Innovations in Engineering and Technology, 5(1), pp.184-190.
5. Mahnic M, Petrak S, 2013. “Investigation of the Fit of Computer-based Parametric Garment Prototypes” , Journal of Fiber Bioengineering and Informatics, 6:1, pp.51-61.
6. Olaru S, Filipescu E, Niculescu C, Salistean A, 2012. “3D Fit Garment Simulation Based on 3D Body Scanner Anthropometric Data”, 2012 April, 8th International DAAAM Baltic Conference Industrial Engineering, Tallinn, Estonia.
7. Perry A, 2017. “3D-Printed Apparel And 3D-Printer: Exploring Advantages, Concerns, and Purchases”; International Journal of Fashion Design, Technology and Education, www.tandfonline.com/loi/tfdt20
8. Spahiu T, Piperi E, Grimmelsmann N, Ehrmann A, Shehi E, 2016. “3D Printing as a New Technology for Apparel Designing and Manufacturing”, 2016 November, Aachen Dresden Denkendorf International Textile Conference, Dresden.

9. Spahiu T, Shehi E, Piperi E, 2014. “Advanced CAD/CAM Systems for Garment Design and Simulation”, Conference: 6th International Conference of Textile, 2014 November, Tirana, Albania
10. Valtas A, Sun D, 2016. “3D Printing for Garments Production: An Exploratory Study”, Journal of Fashion Technology&Textile Engineering, 4:3
11. Zhong Y, Xu B, 2009. “Three-Dimensional Garment Dressing Simulation”, Textile Research Journal, Vol 79(9), pp.792–803.