INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL

Volume: 6 Number: 1 July 23, 2016
  • Mustafa Ay
  • Gültekin Basmacı
TOJSAT Cover
TOJSAT
PDF Download
EN

INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL

Abstract

In this study, an experimental investigation on cutting forces, surface roughness and the hardness of material after machining in turning of 17-4 PH stainless steel using wiper and conventional insert cutting tools with dry cutting condition werepresented. The influences of feed rate, depth of cut, and corner radius on surface roughness, cutting force and material hardnesswere examined. In order to optimize the turning process, Taguchi optimization method has been used. The influence of each parameter on obtained results was determined by using analysis of variance(ANOVA). The relationship between dependent parameters and independent parameters were modeled by Regression analysis. The optimal machinability of 17-4PH stainless steel with coated carbide insert was successfully determined in this study

Keywords

Details

Primary Language

English

Subjects

-

Journal Section

-

Authors

Mustafa Ay This is me
MARMARA UNIVERSITY, FACULTY OF TECHNOLOGY, DEPARTMENT OF MECHANICAL ENGINEERING

Gültekin Basmacı This is me
Mehmet Akif Ersoy University, The Faculty of Engineering and Architecture, Istanbul-Turkey

Publication Date

July 23, 2016

Submission Date

July 23, 2016

Acceptance Date

-

Published in Issue

Year 2016 Volume: 6 Number: 1

IZ

https://izlik.org/JA55NA27SZ

Cite

RIS / Bibtex
APA
Ay, M., & Basmacı, G. (2016). INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL. TOJSAT, 6(1), 33-39. https://izlik.org/JA55NA27SZ
AMA
1.Ay M, Basmacı G. INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL. TOJSAT. 2016;6(1):33-39. https://izlik.org/JA55NA27SZ
Chicago
Ay, Mustafa, and Gültekin Basmacı. 2016. “INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL”. TOJSAT 6 (1): 33-39. https://izlik.org/JA55NA27SZ.
EndNote
Ay M, Basmacı G (July 1, 2016) INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL. TOJSAT 6 1 33–39.
IEEE
[1]M. Ay and G. Basmacı, “INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL”, TOJSAT, vol. 6, no. 1, pp. 33–39, July 2016, [Online]. Available: https://izlik.org/JA55NA27SZ
ISNAD
Ay, Mustafa - Basmacı, Gültekin. “INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL”. TOJSAT 6/1 (July 1, 2016): 33-39. https://izlik.org/JA55NA27SZ.
JAMA
1.Ay M, Basmacı G. INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL. TOJSAT. 2016;6:33–39.
MLA
Ay, Mustafa, and Gültekin Basmacı. “INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL”. TOJSAT, vol. 6, no. 1, July 2016, pp. 33-39, https://izlik.org/JA55NA27SZ.
Vancouver
1.Mustafa Ay, Gültekin Basmacı. INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL. TOJSAT [Internet]. 2016 Jul. 1;6(1):33-9. Available from: https://izlik.org/JA55NA27SZ