Single walled carbon nanotubes for enhanced performance of Li-ion batteries

Year 2018, Volume: 3 Issue: 1, 61 - 64, 01.01.2018

YOUNES Ziat ANAS Benyounes OMAR El Rhazouani Charaf Laghlimi Maryama Hammi

Abstract

In the best of our knowledge, Li-ion batteries are still encountering some problems such as formation of dendrites due to the accumulation of the Li atoms in the graphite until forming a bridge between the anode and cathode then that causes short circuits .This situation has prompted us to think about finding alternatives to the anodic side of the battery, thus, this work is devoted to the use of single walled carbon nanotubes having a diameter of about 1.75 nm in the batteries of lithium ion in order to increase their performance. As the carbon nanotube was used as an anode to receive more lithium and the performance of this anode were compared to the graphite, it has been found that in fact the carbon nanotube allows a longer life cycle of the battery and avoids many problems during its use.

Keywords

Li-ion batteries, single walled carbon nanotubes, life cycle, anode

References

• N. Yamakawa, M. Jiang, B. Key, and C. P. Grey, “Identifying the local structures formed during lithiation of the conversion material, iron fluoride, in a Li ion battery: a solid-state NMR, X-ray diffraction, and pair distribution function analysis study,” Journal of the American Chemical Society, 131(30) (2009) 10525–10536.
• P. L. Taberna, S. Mitra, P. Poizot, P. Simon, and J. M. Tarascon, “High rate capabilities Fe3O4-based Cu nano-architectured electrodes for lithium-ion battery applications,” Nature Materials, vol. 5, no. 7, pp. 567–573, 2006.
• S. W. Kim, D. H. Seo, H. Gwon, J. Kim, and K. Kang, “Fabrication of FeF3 nnoflowers on CNT branches and their application to high power lithium rechargeable batteries,” Advanced Materials, vol. 22, no. 46, pp. 5260–5264, 2010.
• Z. Wang, G. Chen, and D. Xia, “Coating of multi-walled carbon nanotube with SnO2 films of controlled thickness and its application for Li-ion battery,” Journal of Power Sources, vol. 184, no. 2, pp. 432–436, 2008.
• W. X. Chen, J. Y. Lee, and Z. Liu, “The nanocomposites of carbon nanotube with Sb and SnSb0.5 as Li-ion battery anodes,” Carbon, vol. 41, no. 5, pp. 959–966, 2003.
• H. D. Yoo, E. Markevich, G. Salitra, D. Sharon, and D. Aurbach, “On the challenge of developing advanced technologies for electrochemical energy storage and conversion,” Biochem. Pharmacol., vol. 17, no. 3, pp. 110–121, 2014.
• B. L. Ellis, K. T. Lee, and L. F. Nazar, “Positive Electrode Materials for Li-Ion and Li-Batteries †,” pp. 691–714, 2010.
• C.S. Wang, G.T. Wu, W.Z. Li, J. Power Sources 76 (1998) 1–10.
• M.Z.A. Munshi, Handbook of Solid State Batteries and Capacitors, World Scientific, River Edge, NJ, 1995, pp. 467–512.
• M. Winter, J. Besenhard, M. Spahr, P. Novak, Adv. Mater. 10 (1998) 725–763.
• J. R. Dahn, Phys. Rev. B, 1991, 44, 9170.
• A.Satoh, N. Takami and T. Ohsaki, Solid State Ionics, 1995, 80,291–298.
• X. Yuan, H. Liu, and J. Zhang, “Lithium - Ion Batteries: Advanced Materials and Technologies,” p. 418, 2011.
• C. De Las Casas and W. Li, “A review of application of carbon nanotubes for lithium ion battery anode material,” J. Power Sources, vol. 208, pp. 74–85, 2012.
• P. Sehrawat, C. Julien, and S. S. Islam, “Carbon nanotubes in Li-ion batteries: A review,” Mater. Sci. Eng. B Solid-State Mater. Adv. Technol., vol. 213, pp. 12–40, 2016.
• H. Kuzmany, Phonon Structures and Raman Effect of Carbon Nanotubes and Graphene, Second Edition. Elsevier Ltd, 2014.
• L. Li, Z. Yang, H. Gao et al., “Vertically aligned and penetrated carbon nanotube/polymer composite film and promising electronic applications,” Advanced Materials, vol. 23, no. 32, pp. 3730–3735, 2011.
• G. Centi and S. Perathoner, “Problems and perspectives in nanostructured carbon-based electrodes for clean and sustainable energy,” Catalysis Today, vol. 150, no. 1-2, pp. 151–162, 2010.
• M. B. Nardelli, B. I. Yakobson, and J. Bernholc, “Effect of the Growth Temperature on the Diameter Distribution and Chirality of Single-Wall Carbon Nanotubes”, Physics Review Letters 81, 4780(1998).
• M.M.J. Treacy, T.W. Ebbesen, J.M. Gibson, “Strength and Breaking Mechanism of Multiwalled Carbon Nanotubes Under Tensile Load”, Nature 381, 678(1996).
• E. W. Wong, P. E. Sheehan, C. M. Lieber,” Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and Nanotubes”, Science, 277, 1971(1997).
• T. Guo, P. Nikolaev, A. Thess, D. Colbert et R. Smalley: Chem. Phys. Lett., 243, 49– 54(1995).
• A. Thess, R. Lee, P. Nikolaev, H. Dai, P. Petit, J. Robert, C. Xu, Y. Lee, S. Kim, A. Rinzler, D. Colbert, G. Scuseria, D. Tom´anek, J. Fischer et R. Smalley: Science, 273, 483–487, 1996.