Research Article

Design, Construction and Results of a Low Energy DC Ion Accelerator

Volume: 23 Number: 1 April 24, 2018
TR EN

Design, Construction and Results of a Low Energy DC Ion Accelerator

Abstract

The main purpose of in this study is described to optimal design and construction of low energy DC ion accelerator with energy up to 100 keV. Initial measurements obtained are given. This small accelerator includes an ICP type ion source, an accelerator tube with 7 electrodes, two quadrupol magnet for focusing, one dipole magnet for bending and a faraday cup at the end of beam line to measure ion current. The existing technology was used to make the major components. Simulation results for ion source, DC accelerator tube and magnets are presented performed with SIMION, WINAGILE, GPT codes.

Keywords

References

  1. Brown, I. G. (Ed.) (2004) The physics and technology of ion sources, ISBN 3-527-40410-4.Erişim Tarihi: 12/10/2011, Konu: Demet Taşıma Sistemi İçin Simülasyon.
  2. http://simion.com/ , Erişim Tarihi: 12.10.2011, Konu: İyon Kaynağı için Simülasyon.
  3. http://www.maxlab.lu.se/acc-phys/teach/mnx301/1998/13-winagile.htm ,
  4. http://www.pulsar.nl/gpt , Erişim Tarihi: 12/10/2011, Konu: Hızlandırıcı ve Demet Hattı Dizaynı.
  5. Recepoğlu, E., Karadeniz, H., Alaçakır, A., (2012), Design and construction of a 100 keV DC linear ion accelerator at SNRTC, Balkan Physics Letters, BPL, 20, 201032, pp. 274 - 279.
  6. TAEK Teknik Rapor, Yüklü Parçacıklar İçin Demet Hattı Tasarımı ve Demet Parametrelerinin Ölçülmesi, TAEKTR-2014-1.
  7. Wolf, B. (Ed.) (1995) Handbook of the ion sources, ISBN 0-8493-2502-1.

Details

Primary Language

English

Subjects

Engineering

Journal Section

Research Article

Authors

Publication Date

April 24, 2018

Submission Date

September 14, 2017

Acceptance Date

April 6, 2018

Published in Issue

Year 2018 Volume: 23 Number: 1

APA
Karadeniz, H. (2018). Design, Construction and Results of a Low Energy DC Ion Accelerator. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 23(1), 345-352. https://doi.org/10.17482/uumfd.338184
AMA
1.Karadeniz H. Design, Construction and Results of a Low Energy DC Ion Accelerator. UUJFE. 2018;23(1):345-352. doi:10.17482/uumfd.338184
Chicago
Karadeniz, Hande. 2018. “Design, Construction and Results of a Low Energy DC Ion Accelerator”. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 23 (1): 345-52. https://doi.org/10.17482/uumfd.338184.
EndNote
Karadeniz H (April 1, 2018) Design, Construction and Results of a Low Energy DC Ion Accelerator. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 23 1 345–352.
IEEE
[1]H. Karadeniz, “Design, Construction and Results of a Low Energy DC Ion Accelerator”, UUJFE, vol. 23, no. 1, pp. 345–352, Apr. 2018, doi: 10.17482/uumfd.338184.
ISNAD
Karadeniz, Hande. “Design, Construction and Results of a Low Energy DC Ion Accelerator”. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 23/1 (April 1, 2018): 345-352. https://doi.org/10.17482/uumfd.338184.
JAMA
1.Karadeniz H. Design, Construction and Results of a Low Energy DC Ion Accelerator. UUJFE. 2018;23:345–352.
MLA
Karadeniz, Hande. “Design, Construction and Results of a Low Energy DC Ion Accelerator”. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, vol. 23, no. 1, Apr. 2018, pp. 345-52, doi:10.17482/uumfd.338184.
Vancouver
1.Hande Karadeniz. Design, Construction and Results of a Low Energy DC Ion Accelerator. UUJFE. 2018 Apr. 1;23(1):345-52. doi:10.17482/uumfd.338184

Cited By

Announcements:

30.03.2021-Beginning with our April 2021 (26/1) issue, in accordance with the new criteria of TR-Dizin, the Declaration of Conflict of Interest and the Declaration of Author Contribution forms fulfilled and signed by all authors are required as well as the Copyright form during the initial submission of the manuscript. Furthermore two new sections, i.e. ‘Conflict of Interest’ and ‘Author Contribution’, should be added to the manuscript. Links of those forms that should be submitted with the initial manuscript can be found in our 'Author Guidelines' and 'Submission Procedure' pages. The manuscript template is also updated. For articles reviewed and accepted for publication in our 2021 and ongoing issues and for articles currently under review process, those forms should also be fulfilled, signed and uploaded to the system by authors.