EKLEMELİ İMALAT (3B BASKI): TEKNOLOJİLER VE UYGULAMALAR

Hasan Kemal Sürmen

doi:10.17482/uumfd.519147

EKLEMELİ İMALAT (3B BASKI): TEKNOLOJİLER VE UYGULAMALAR

Abstract

Hızlı prototipleme ve üç boyutlu (3B) baskı adlarıyla da bilinen eklemeli imalat, geleneksel bilgisayar destekli üretimdeki talaş kaldırma prensibinin tersine, malzemelerin birleştirilerek katmanlar halinde oluşturulup üst üste eklenmesi prensibine dayanan, serbest formlu ve karmaşık geometrili objelerin üretilmesine imkan sağlayan pratik bir imalat metodudur. Günümüzde daha çok 3B baskı olarak anılan bu yöntem, çatısı altında birçok farklı teknoloji bulundurmaktadır. Ürünlerin farklı malzeme, mekanik ve geometrik özelliklerinden dolayı çeşitli eklemeli imalat teknolojileri geliştirilmiş ve ticarileştirilerek otomotiv, havacılık, biyomedikal, tıp, gıda, eğitim ve eğlence sektörlerinin kullanımına sunulmuştur. Bu yazıda eklemeli imalat teknolojileri ile ilgili kapsamlı bir derleme yapılmıştır. 3B baskı sürecindeki işlem adımları izah edilmiş, günümüzde kullanılan popüler 3B baskı teknolojilerinin çalışma prensipleri açıklanmış ve karşılaştırılmaları yapılmıştır. Güncel uygulama alanlarına da yer verilen bu yazıda 3B baskı teknolojilerine ait bazı püf noktaları ve gelecek yönelimlerinden de bahsedilmiştir.

Keywords

Eklemeli imalat,3B baskı,Yöntemler,3D yazıcı,Uygulama alanları,Teknolojiler

References

1. Adamidis, O., Alber, S. ve Anastasopoulos, I. (2018). Investigation into 3D printing of granular media. Physical Modelling in Geotechnics, Proceedings of the 9th International Conference on Physical Modelling in Geotechnics, CRC Press, London, 113-118. doi:10.1201/9780429438660-9
2. Agarwala, M., Bourell, D., Beaman, J., Marcus, H. ve Barlow, J. (1995). Direct selective laser sintering of metals. Rapid Prototyping Journal, 1(1), 26-36. doi:10.1108/13552549 510078113
3. Asadollahi-Yazdi, E., Gardan, J. ve Lafon, P. (2016). Integrated design in additive manufacturing based on design for manufacturing. Int'l Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10(6), 1104-1111.
4. ASTM Committee F42 on Additive Manufacturing Technologies & ASTM Committee F42 on Additive Manufacturing Technologies. Subcommittee F42. 91 on Terminology. (2012). Standard terminology for additive manufacturing technologies. ASTM International. doi: 10.1520/F2792-09
5. Beaman, J. J. ve Deckard, C. R. (1990). U.S. Patent No. 4,938,816. Washington, DC: U.S. Patent and Trademark Office.
6. Calignano, F., Manfredi, D., Ambrosio, E. P., Biamino, S., Lombardi, M., Atzeni, E. ve Fino, P. (2017). Overview on Additive Manufacturing Technologies. Proceedings of the IEEE, 105(4), 593-612. doi: 10.1109/JPROC.2016.2625098
7. Canzi, P., Marconi, S., Manfrin, M., Magnetto, M., Carelli, C., Simoncelli, A. M. ve Benazzo, M. (2018). From CT scanning to 3D printing technology: a new method for the preoperative planning of a transcutaneous bone-conduction hearing device. Acta Otorhinolaryngologica Italica, 38, 251-256. doi: 10.14639/0392-100X-1625
8. Chaput, C. ve Chartier, T. (2007, August). Fabrication of ceramics by stereolithography. RTejournal-Forum für Rapid Technologie, 4(1).

9. Cheriachan, D. M., DiPaola, M., Iannotti, J. P. ve Ricchetti, E. T. (2019). 3D Printing in Orthopedics-Upper Extremity Arthroplasty. 3D Printing in Orthopaedic Surgery, 151-169. doi: 10.1016/b978-0-323-58118-9.00013-0
10. Chua, C. K. ve Leong, K. F. (2014). 3D Printing and Additive Manufacturing: Principles and Applications (with Companion Media Pack) of Rapid Prototyping Fourth Edition. World Scientific Publishing Company.
11. Crump, S. S. (1992). U.S. Patent No. 5,121,329. Washington, DC: U.S. Patent and Trademark Office.
13. Damianou, C., Giannakou, M., Yiallouras, C. ve Menikou, G. (2018). The role of three-dimensional printing in magnetic resonance imaging-guided focused ultrasound surgery. Digital Medicine, 4(1), 22. doi: 10.4103/digm.digm_48_17
14. Danforth, S. C. ve Safari, A. (1996, August). Solid freeform fabrication: novel manufacturing opportunities for electronic ceramics. Applications of Ferroelectrics, 1996. ISAF'96., Proceedings of the Tenth IEEE International Symposium, 1, 183-188. doi:10.1109/isaf.1996.602732
15. Dudek, P. F. D. M. (2013). FDM 3D printing technology in manufacturing composite elements. Archives of Metallurgy and Materials, 58(4), 1415-1418. doi:10.2478/amm-2013-0186
16. Dupláková, D., Hatala, M., Duplák, J., Radchenko, S. ve Steranka, J. (2018). Direct Metal Laser Sintering–Possibility of Application in Production Process. Science and Research Journal, 1(4), 123-127. doi:10.18421/SAR14-01
17. Durgun, I. (2015). Sheet metal forming using FDM rapid prototype tool. Rapid Prototyping Journal, 21(4), 412-422. doi:10.1108/rpj-01-2014-0003
18. Fetvaci, M. C. (2017). Determination of effective involute parameter limit in generation simulation of gears manufactured by rack-type cutters. Mechanics & Industry, 18(4), 405. doi: 10.1051/meca/2017028
19. Frazier, W. E. (2014). Metal additive manufacturing: a review. Journal of Materials Engineering and Performance, 23(6), 1917-1928. doi:10.1007/s11665-014-0958-z
20. Garg, A., Bhattacharya, A. ve Batish, A. (2016). On surface finish and dimensional accuracy of FDM parts after cold vapor treatment. Materials and Manufacturing Processes, 31(4), 522-529. doi:10.1080/10426914.2015.1070425
21. Gosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J. ve Morel, P. (2016). Large-scale 3D printing of ultra-high performance concrete–a new processing route for architects and builders. Materials ve Design, 100, 102-109. doi:10.1016/j.matdes.2016.03.097
22. Goyanes, A., Kobayashi, M., Martínez-Pacheco, R., Gaisford, S. ve Basit, A. W. (2016). Fused-filament 3D printing of drug products: microstructure analysis and drug release characteristics of PVA-based caplets. International journal of pharmaceutics, 514(1), 290-295. doi:10.1016/j.ijpharm.2016.06.021
23. Guillotin, B., Souquet, A., Catros, S., Duocastella, M., Pippenger, B., Bellance, S. ve Guillemot, F. (2010). Laser assisted bioprinting of engineered tissue with high cell density and microscale organization. Biomaterials, 31(28), 7250-7256. doi:10.1016/j.biomaterials. 2010.05.055
24. Han, Y., Wang, F., Wang, H., Jiao, X. ve Chen, D. (2018). High-strength boehmite-acrylate composites for 3D printing: Reinforced filler-matrix interactions. Composites Science and Technology, 154, 104-109. doi:10.1016/j.compscitech.2017.10.026
25. Hanssen, J., Moe, Z. H., Tan, D. ve Chien, O. Y. (2013). Rapid Prototyping in Manufacturing. Handbook of Manufacturing Engineering and Technology, 1-16.
26. Hornbeck, L. J. (1991). U.S. Patent No. 5,061,049. Washington, DC: U.S. Patent and Trademark Office.
27. http://www.3dnatives.com/en/polyjet100420174/, Erişim Tarihi: 07.08.2018, Konu: Polijet teknolojisi.
12. Cui, X., Boland, T., DD'Lima, D. ve K Lotz, M. (2012). Thermal inkjet printing in tissue engineering and regenerative medicine. Recent patents on drug delivery ve formulation, 6(2), 149-155. doi: 10.2174/187221112800672949
28. https://amtech3d.com/3d-printing-techniques/, Erişim Tarihi: 02.06.2019, Konu: Direk Işık İşleme.
29. http://www.custompartnet.com/wu/fused-deposition-modeling/, Erişim Tarihi: 02.06.2019, Konu: Eriyik Yığarak Modelleme.
30. https://prattparametrics.com/2017/09/18/3d-printing-research-6/, Erişim Tarihi: 02.06.2019, Konu: 3B baskı teknolojileri.
31. https://www.sculpteo.com/media/ebook/State_of_3DP_2018.pdf, Erişim Tarihi: 10.11. 2018, Konu: 3B baskı teknolojileri.
32. Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S. ve Masanet, E. (2016). Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components. Journal of Cleaner Production, 135, 1559-1570. doi:10.1016/j.jclepro.2015.04.109
33. Hull, C. W. (1986). U.S. Patent No. 4,575,330. Washington, DC: U.S. Patent and Trademark Office.
34. Jacobs, P. F. (1992). Fundamentals of stereolithography. 1992 International Solid Freeform Fabrication Symposium.
35. Kang, H. W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J. ve Atala, A. (2016). A 3D bioprinting system to produce human-scale tissue constructs with structural integrity. Nature biotechnology, 34(3), 312. doi:10.1038/nbt.3413
36. Khan, H. M., Dirikolu, M. H., & Koç, E. (2018). Parameters optimization for horizontally built circular profiles: Numerical and experimental investigation. Optik, 174, 521-529. doi: 10.1016/j.ijleo.2018.08.095
37. Kim, M. K., Kim, J. H., Park, S. E. ve BACK, S. A. (2018). U.S. Patent Application No. 15/745,736.
38. Krinitcyn, M., Fu, Z., Harris, J., Kostikov, K., Pribytkov, G. A., Greil, P. ve Travitzky, N. (2017). Laminated Object Manufacturing of in-situ synthesized MAX-phase composites. Ceramics International, 43(12), 9241-9245. doi:10.1016/j.ceramint.2017.04 .079
39. Kumar, S., Choudhary, A. K. S., Singh, A. K., Gupta, A. K., Kumar, S., Choudhary, A. K. S. ve Gupta, A. K. (2016). A Comparison of Additive Manufacturing Technologies. IJIRST-International Journal for Innovative Research in Science ve Technology, 3(01), 06.
40. Lipton, J. I., Cutler, M., Nigl, F., Cohen, D. ve Lipson, H. (2015). Additive manufacturing for the food industry. Trends in food science ve technology, 43(1), 114-123. doi:10.1016/j.tifs.2015.02.004
41. Long, J., Gholizadeh, H., Lu, J., Bunt, C. ve Seyfoddin, A. (2017). Application of fused deposition modelling (FDM) method of 3D printing in drug delivery, Current pharmaceutical design, 23(3), 433-439. doi:10.2174/1381612822666161026162707
42. Markovıć, V. ve Žıvkovıć, P. (2016). 3D printing–challenges and perspectives, International Scientific Journal of Technical Sciences, 60-67.
43. McMenamin, P. G., Quayle, M. R., McHenry, C. R. ve Adams, J. W. (2014). The production of anatomical teaching resources using three‐dimensional (3D) printing technology. Anatomical sciences education, 7(6), 479-486. doi:10.1002/ase.1475
44. Meiners, W., Wissenbach, K. ve Gasser, A. (2001). U.S. Patent No. 6,215,093. Washington, DC: U.S. Patent and Trademark Office.
45. Mostafaei, A., Stevens, E. L., Ference, J. J., Schmidt, D. E. ve Chmielus, M. (2017). Binder jet printing of partial denture metal framework from metal powder. Mater. Sci. Technol., 289-291. doi:10.7449/2017mst/2017/mst_2017_289_291
46. Murphy, S. V. ve Atala, A. (2014). 3D bioprinting of tissues and organs. Nature biotechnology, 32(8), 773. doi:10.1038/nbt.2958
47. Murr, L. E., Amato, K. N., Li, S. J., Tian, Y. X., Cheng, X. Y., Gaytan, S. M. ve Wicker, R. B. (2011). Microstructure and mechanical properties of open-cellular biomaterials prototypes for total knee replacement implants fabricated by electron beam melting. Journal of the mechanical behavior of biomedical materials, 4(7), 1396-1411. doi:10.1016/j.jmbbm.2011 .05.010
48. Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. ve Hui, D. (2018). Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering. doi:10.1016/j.compositesb.2018.02.012
49. Niaki, M. K. ve Nonino, F. (2018). The Management of Additive Manufacturing. Springer.doi: 10.1007/978-3-319-56309-1
50. Oropallo, W. ve Piegl, L. A. (2016). Ten challenges in 3D printing, Engineering with Computers, 32(1), 135-148. doi:10.1007/s00366-015-0407-0
51. Ortes, F., Surmen, H. K. ve Arslan, Y. Z. (2016). A bıomechatronıc applıcatıon on prosthetıcs for undergraduate engıneerıng students. The Eurasia Proceedings of Educational & Social Sciences, 4, 461-464.
52. Panwar, A. ve Tan, L. P. (2016). Current status of bioinks for micro-extrusion-based 3D bioprinting. Molecules, 21(6), 685. doi:10.3390/molecules21060685
53. Ramya, A. ve Vanapalli, S. L. (2016). 3D printing technologies in various applications. International Journal of Mechanical Engineering and Technology, 7(3), 396-409.
54. Richardson, M. ve Haylock, B. (2012). Designer/maker: the rise of additive manufacturing, domestic-scale production and the possible implications for the automotive industry. Computer-Aided Design ve Applications PACE, 2, 33-48. doi: 10.3722/cadaps. 2012.pace.33-48
55. Singh, S., Ramakrishna, S. ve Singh, R. (2017). Material issues in additive manufacturing: A review. Journal of Manufacturing Processes, 25, 185-200. doi:10.1016/j.jmapro.2016 .11.006
56. Swanson, W. J., Mannella, D. F. ve Schloesser, R. G. (2013). U.S. Patent No. 8,459,280. Washington, DC: U.S. Patent and Trademark Office.
57. Tack, P., Victor, J., Gemmel, P. ve Annemans, L. (2016). 3D-printing techniques in a medical setting: a systematic literature review. Biomedical engineering online, 15(1), 115. doi:10.1186/s12938-016-0236-4
58. Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D. ve Samulski, E. T. (2015). Continuous liquid interface production of 3D objects. Science, 2397. doi:10.1126/science.aaa2397
59. Udroiu, R., ve Braga, I. C. (2017). Polyjet technology applications for rapid tooling, MATEC Web of Conferences, 112, 3011. doi:10.1051/matecconf/201711203011
60. Vaezi, M., Seitz, H. ve Yang, S. (2013). A review on 3D micro-additive manufacturing technologies. The International Journal of Advanced Manufacturing Technology, 67(5-8), 1721-1754. doi:10.1007/s00170-013-4962-5
61. Vaupotic, B., Brezocnik, M. ve Balic, J. (2006). Use of PolyJet technology in manufacture of new product. Journal of Achievements in Materials and Manufacturing Engineering, 18(1-2), 319-322.
62. Wang, Y. C., Chen, T. ve Yeh, Y. L. (2018). Advanced 3D printing technologies for the aircraft industry: a fuzzy systematic approach for assessing the critical factors. The International Journal of Advanced Manufacturing Technology, 1-11. doi:10.1007/s00170-018-1927-8
63. Wohlers Report 2018, 2018. Wohlers Associates.
64. Wohlers, T. ve Gornet, T. (2014). History of additive manufacturing. Wohlers report, 24(2014), 118.
65. Wong, K. V. ve Hernandez, A. (2012). A review of additive manufacturing. ISRN Mechanical Engineering. 2012. doi:10.5402/2012/208760
66. Wu, W., Jiang, J., Jiang, H., Liu, W., Li, G., Wang, B. ve Zhao, J. (2018). Improving bending and dynamic mechanics performance of 3D printing through ultrasonic strengthening. Materials Letters, 220, 317-320. doi:10.1016/j.matlet.2018.03.048
67. Yan, X. ve Gu, P. E. N. G. (1996). A review of rapid prototyping technologies and systems. Computer-Aided Design, 28(4), 307-318. doi:10.1016/0010-4485(95)00035-6
68. Yang, Y. ve Li, L. (2018). Cost modeling and analysis for Mask Image Projection Stereolithography additive manufacturing: Simultaneous production with mixed geometries. International Journal of Production Economics, 206, 146-158. doi:10.1016 /j.ijpe.2018.09.023
69. Zhang, B., Luo, Y., Ma, L., Gao, L., Li, Y., Xue, Q. ve Cui, Z. (2018). 3D bioprinting: an emerging technology full of opportunities and challenges. Bio-Design and Manufacturing, 1-12. doi:10.1007/s42242-018-0004-3
70. Zhang, Z. Y., Jhong, K. J., Cheng, C. W., Huang, P. W., Tsai, M. C. ve Lee, W. H. (2016). Metal 3D printing of synchronous reluctance motor. Industrial Technology (ICIT), 2016 IEEE International Conference, 1125-1128. doi:10.1109/icit.2016.7474912

Details

Primary Language

Turkish

Subjects

Engineering

Journal Section

Review

Authors

Hasan Kemal Sürmen ^*
0000-0001-8045-9193
Türkiye

Publication Date

August 30, 2019

Submission Date

January 29, 2019

Acceptance Date

June 26, 2019

Published in Issue

Year 2019 Volume: 24 Number: 2

DOI

https://doi.org/10.17482/uumfd.519147

IZ

https://izlik.org/JA89HD34XZ

Cite

RIS / Bibtex

APA

Sürmen, H. K. (2019). EKLEMELİ İMALAT (3B BASKI): TEKNOLOJİLER VE UYGULAMALAR. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 24(2), 373-392. https://doi.org/10.17482/uumfd.519147

AMA

1.Sürmen HK. EKLEMELİ İMALAT (3B BASKI): TEKNOLOJİLER VE UYGULAMALAR. UUJFE. 2019;24(2):373-392. doi:10.17482/uumfd.519147

Chicago

Sürmen, Hasan Kemal. 2019. “EKLEMELİ İMALAT (3B BASKI): TEKNOLOJİLER VE UYGULAMALAR”. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 24 (2): 373-92. https://doi.org/10.17482/uumfd.519147.

EndNote

Sürmen HK (August 1, 2019) EKLEMELİ İMALAT (3B BASKI): TEKNOLOJİLER VE UYGULAMALAR. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 24 2 373–392.

IEEE

[1]H. K. Sürmen, “EKLEMELİ İMALAT (3B BASKI): TEKNOLOJİLER VE UYGULAMALAR”, UUJFE, vol. 24, no. 2, pp. 373–392, Aug. 2019, doi: 10.17482/uumfd.519147.

ISNAD

Sürmen, Hasan Kemal. “EKLEMELİ İMALAT (3B BASKI): TEKNOLOJİLER VE UYGULAMALAR”. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 24/2 (August 1, 2019): 373-392. https://doi.org/10.17482/uumfd.519147.

JAMA

1.Sürmen HK. EKLEMELİ İMALAT (3B BASKI): TEKNOLOJİLER VE UYGULAMALAR. UUJFE. 2019;24:373–392.

MLA

Sürmen, Hasan Kemal. “EKLEMELİ İMALAT (3B BASKI): TEKNOLOJİLER VE UYGULAMALAR”. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, vol. 24, no. 2, Aug. 2019, pp. 373-92, doi:10.17482/uumfd.519147.

Vancouver

1.Hasan Kemal Sürmen. EKLEMELİ İMALAT (3B BASKI): TEKNOLOJİLER VE UYGULAMALAR. UUJFE. 2019 Aug. 1;24(2):373-92. doi:10.17482/uumfd.519147