In recent years, carbon nanotubes (CNTs) have emerged as materials that are often used in the preparation of polymer nanocomposites with conductive or advanced dielectric properties due to their unique properties including high temperature and electrical conductivity, which allows the production of very light and robust materials with a very high length-to-diameter ratio. However, during the preparation of polymeric nanocomposites with these materials, some problems are encountered. One of the major problems is that after preparing these conductive
materials or adding them into the polymer, they tend to aggregate, forming agglomerate, due to their conductive structures. Therefore, in this study, firstly, multi-walled carbon nanotubes (MWCNTs) were functionalized with conductive form of polyaniline (PANI) and subsequently, the poly (dimethyl siloxane) (PDMS) polymer nanocomposite films with different concentrations of functionalized multi-walled carbon nanotubes were prepared. Then, the structural, morphological, electrical and dielectric properties of the films were characterized. As a result, with the addition of only 1.5% PANI-CNT, the dielectric constant of PDMS was increased by 47-fold at 1 Hz. The dielectric films like presented here can be used in capacitors, flexible electronics, dielectric elastomers and artificial muscle applications.
Carbon Nanotubes (CNTs) Conductive Polymer Dielectric Polyaniline (PANI) Polymer Nanocomposite poly(dimethyl siloxane) (PDMS)
2015-01-008
Son yıllarda, yüksek uzunluk/çap oranı ile hafif ve sağlam kompozitler hazırlanmasını mümkün kılan karbon nanotüpler, yüksek ısıl ve elektriksel iletkenlikleri gibi benzersiz özelliklerinden dolayı iletkenlik veya dielektrik özellikleri yüksek polimer nanokompozitlerin üretiminde kullanılan bir malzeme olarak ortaya çıkmıştır. Bununla birlikte, bu malzemelerle polimerik nanokompozitlerin hazırlanması sırasında bazı problemlerle karşılaşılmaktadır. En büyük sorunlardan biri, bu iletken malzemeleri hazırladıktan veya polimere ekledikten sonra, iletken yapıları
nedeniyle topaklanma, topak oluşturma eğilimi göstermeleridir. Bu nedenle, bu çalışmada ilk olarak, çok duvarlı karbon nanotüpler (MWCNT'ler) polianilinin iletken formu (PANI) ile fonksiyonelleştirilmiştir. Ardından, farklı konsantrasyonlarda fonksiyonelleştirilmiş çok duvarlı karbon nanotüplere sahip nanokompozit poli(dimetil siloksan) (PDMS) polimer filmler hazırlanmıştır. Daha sonra ise, filmlerin yapısal, morfolojik, elektriksel ve dielektrik özellikleri karakterize edilmiştir. Sonuç olarak, sadece % 1,5 PANI-CNT ilavesiyle, PDMS'nin dielektrik sabiti 1 Hz'de 47 kat arttırılmıştır. Burada ortaya konulduğu gibi dielektrik filmler kapasitörler, esnek elektronik, dielektrik elastomer ve yapay kas uygulamalarında kullanılabilir.
Karbon Nanotüp (CNTs) İletken Polimer Dielektrik Polianilin (PANI) Polimer Nanokompozit Poli (dimetil siloksan) (PDMS)
Bursa Teknik Üniversitesi Bilimsel Araştırma Projeleri Birimi
2015-01-008
Primary Language | English |
---|---|
Subjects | Polymer Science and Technologies, Composite and Hybrid Materials, Nanotechnology |
Journal Section | Research Articles |
Authors | |
Project Number | 2015-01-008 |
Publication Date | August 31, 2020 |
Submission Date | May 1, 2020 |
Acceptance Date | July 11, 2020 |
Published in Issue | Year 2020 Volume: 25 Issue: 2 |
Announcements:
30.03.2021-Beginning with our April 2021 (26/1) issue, in accordance with the new criteria of TR-Dizin, the Declaration of Conflict of Interest and the Declaration of Author Contribution forms fulfilled and signed by all authors are required as well as the Copyright form during the initial submission of the manuscript. Furthermore two new sections, i.e. ‘Conflict of Interest’ and ‘Author Contribution’, should be added to the manuscript. Links of those forms that should be submitted with the initial manuscript can be found in our 'Author Guidelines' and 'Submission Procedure' pages. The manuscript template is also updated. For articles reviewed and accepted for publication in our 2021 and ongoing issues and for articles currently under review process, those forms should also be fulfilled, signed and uploaded to the system by authors.