PRESSURE DISTRIBUTION OF FLUID IN A JOURNAL BEARING CONSIDERING THE EFFECT OF SIDE OR END LEAKAGE, USING THE TWO DIMENSIONAL REYNOLDS MODEL

Yıl 2019, Cilt: 2 Sayı: 1, 8 - 15, 30.06.2019

İredia Erhunmwun John Akpobi

Öz

Abstract

This paper
presents numerical solution to the pressure distribution of a fluid in a
hydrodynamically lubricated journal bearing using the classical Reynolds
equation that models the effect of side or end leakage i.e., there is flow in
the z-direction in bearings. The finite element method was used to analyze the
flow. Two dimensional interpolation functions were used in the modelling and
discretization of the domain of analysis. The result obtained from this research shows that the pressure increases
from the ambient pressure which is taken to be zero at an angular displacement
of



















 and increases
significantly till

 . At this point, the
pressure becomes maximum. Thereafter, it begins to drop until it gets to

 where the pressure
becomes the same as the ambient pressure. From this point onward, we begin to
experience negative pressure. The negative pressures in this regard are those
that are below the ambient pressure.

Anahtar Kelimeler

Finite Element Method, Journal Bearing, Reynolds Equation, End Leakage

Kaynakça

• 1. Budynas−Nisbett, (2008). Shigley’s Mechanical Engineering Design, 8th Edition, McGraw-Hill.
• 2. Nuruzzaman, D.M., Khalil, M.K., Chowdhury, M.A. and Rahaman, M.L. (2010). Study on Pressure Distribution and Load Capacity of a Journal Bearing Using Finite Element Method and Analytical Method. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 10(5), pp. 1-8.
• 3. Gustavo, G.V., Daniel, O.B. and Lidia, M.Q. (2011). Approximate analytical approximate solution to Reynolds equation for finite length journal bearings. Trib. Int. 44(10), pp. 1089 – 1099.
• 4. Benasciutti. D., Gallina, M., Munteanu, G. and Flumian, F. (2012). A numerical approach for the analysis of deformable journal bearings, Frattura ed Integrità Strutturale, 21, pp. 37-45.
• 5. Dwivedi, V.K., Sanjeev K.G., Deepti S., Pratibha S. and Bhupendra S. (2012). Effect of Eccentricity Ratio on Pressure Profile of Short Journal Bearing. Proceeding of 1st International Conference on Innovative Technologies in Mechanical Engineering, pp. 225-230.
• 6. Dwivedi, V.K. and Gupta Kr. S., (2011). Finite difference method analysis of hybrid bearing, 5th International Conference on Advances in Mechanical Engineering , pp. 240 - 244.
• 7. Navthar, R.R., Halegowda, N.V. and Deshpande, S. (2012). Pressure distribution analysis of hydrodynamic journal bearing using artificial neural network, International Conference on computer & automation Eng. 4th ( ICCAE2012).
• 8. Sfyris, D. and Chasalevris, A. (2012). An exact analytical solution of the Reynolds equation for the finite journal bearing lubrication. Trib. Int. 55, pp. 46-58.
• 9. Mane, R.M. and Soni, S. (2013). Analysis of hydrodynamic plain journal bearing. Excerpt from the proceedings of the 2013 COSMOL Conference in Bangalore.
• 10. Marco, T.C.F. (2014). On the Hydrodynamic Long Journal Bearing Theory. Proceedings of the World Congress on Engineering, Vol II, London, U.K.
• 11. Priyanka, T. and Veerendra, K. (2014). Analysis of Hydrodynamic Journal Bearing Using CFD and FSI Technique. Int. J. of Eng. Res. & Tech. (IJERT), 3, pp. 1210-1215.
• 12. Paras, K. and Ashish, K.G. (2014). Experimental Investigation on Hydrodynamic Journal bearing using SAE 10W30 Multi Grade Oil. Int. J. of Adv. Research and Innov., 2(1), pp. 166-173.
• 13. Tom, G., Rajagopal, K.R., Rolf, S. and Juha, V. (2015). Nonlinear Reynolds equation for hydro dynamic lubrication. Submitted to Elsevier.
• 14. Francisco, J.P., Matteo, G., Demetrio, C.Z. and Daniele, D. (2015). A General Finite Volume Method for the Solution of the Reynolds Lubrication Equation with a Mass-Conserving Cavitation Model. Tribol. Lett., 60(18), pp. 1-21.
• 15. Fu, Y., Zhou, X., Guo, H. and Mei, P. (2016), Lubrication Analysis of Journal Bearings in R410A Rotary Compressor. International Compressor Engineering Conference at Purdue. Paper 2509.
• 16. Verma, A. and Samant, S.S. (2016). Inspection of Hydrodynamic Lubrication in Infinitely Long Journal Bearing with Oscillating Journal Velocity. J. Appl. Mech. Eng., 5(3), pp. 1-7.
• 17. Muzakkir, S.M. (2016). Methodology for the Control of Wear of Journal Bearing Operating in Mixed Lubrication Regime. Inter. J. Appl. Eng. Res., 11(1), pp. 665-668.
• 18. Shinde, P.D. and Nagare, P.N. (2016). Experimental Evaluation of Performance Parameters of Journal Bearing Operating in Boundary/ Mixed Lubrication Regimes. Inter. Adv. Res. J. Sci., Eng. and Tech.; 2nd Inter. Conf. Adv. Mech. Eng. (ICAME-2016), 3(1), pp. 116-120.
• 19. Manojkumar, Shamburaje and Rameshwar (2016). CFD analysis of elasto hydro-dynamic lubrication journal bearing using castor oil and bronze material. Inter. J. Adv. Res. Innov. Ideas In Eng. 2(2), pp. 56-67.
• 20. Hamdavi, S., Ya, H.H., Rao, T.V.V.L.N. and Faez, K.M. (2016). An analytical approach to investigate the effect of grooved surface on short journal bearing’s performance. ARPN J. Eng. Appl. Sci., 11(20), pp. 12045-12049.
• 21. Ahmad, M.A., Salmiah, K., Rob-Dwyer J. and Che F.M.T. (2012). Preliminary study of Pressure Profile in Hydrodynamic Lubrication Journal Bearing. International Symposium on Robotics and Intelligent Sensors, vol. 41, pp. 1743 – 1749.