Araştırma Makalesi

Determination of the roll-off value in the air-gapped inductor of a DC-DC boost converter circuit with FEA parametric simulations

Cilt: 8 Sayı: 2 30 Nisan 2020
Balkan Journal of Electrical and Computer Engineering Kapak
Balkan Journal of Electrical and Computer Engineering
PDF İndir
EN

Determination of the roll-off value in the air-gapped inductor of a DC-DC boost converter circuit with FEA parametric simulations

Öz

The electromagnetic behavior of the inductors used as passive circuit elements directly affects the electrical and mechanical performance of the power electronics circuits. In general, when using inductor core structures with or without airgap in the classical design process, the dynamic effects of the inductance value are not considered in the design stage. However, the inductance value may change during the operation of the circuit due to electrical and magnetic parameters of the inductor, and this change is called roll-off value of the inductance. In this study, the roll-off value has been measured graphically and numerically based on mechanical parameters (such as air-gap length) and electrical parameters (such as winding turns and DC current amplitude) for an air-gapped ferrite E core designed with FEA software. Thus, not only the inductance value calculated in the design stage but also the roll-off value during the operation of the circuit has been reported with the parametric simulation studies.

Anahtar Kelimeler

Kaynakça

  1. [1] M. Ashraf, N. Masoum. "High efficiency boost converter with variable output voltage using a self-reference comparator." AEU - International Journal of Electronics and Communications, vol. 68. 11, 2014, pp 1058-1064. [2] S. Balci. “A CFD simulation of the liquid-cooled pipe conductors for the high-power and high frequency power electronic circuits.” Measurement 147, 2019, doi.org/10.1016/j.measurement.2019.106885. [3] D. IjikeOna, G. YunTian, R. Sutthaweekul, S. MohsenNaqvi. “Design and optimisation of mutual inductance based pulsed eddy current probe.” Measurement, 144, 2019, pp 402-409. [4] S. Balci. “A Comparative Simulations on the Electromagnetic and Mechanical Effects of the Various Inductor Core Forms for DC-DC Converter Circuits.” Düzce University Journal of Science & Technology, vol. 7, 2019, pp 1130-1139. [5] M. H. Sarul, G. Yıldırmaz, R. Gülgün. “Measurement of the inductance of a coil with core at different currents by a dc chopper.” Electrical Engineering, vol. 82. 5, 2000, pp 273–277. [6] S. Dwari, S. Jayawant, T. Beechner, S. K. Miller, A. Mathew, M. Chen, J. Riehl, J. Sun. “Dynamics Characterization of Coupled-Inductor Boost DC-DC Converters.” IEEE COMPEL Workshop, Rensselaer Polytechnic Institute, Troy, NY, USA, 16-19, 2006, pp 264-269. [7] İ. Sefa, S. Balci, N. Altin. “Design of the AC Line Reactors with Finite Element Method.” Journal of Polytechnic, vol. 18. 4, 2015, pp 257-267. [8] Z. Dang, J. A. Abu Qahouq, “Modeling and Design Guidelines of High-Density Power Inductor for Battery Power Unit." IEEE Applied Power Electronics Conference and Exposition (APEC). Long Beach, CA, USA. 2016. [9] Y. Du, T. Jiang, Z. Xu, “Coupled Electromagnetic and Thermal Simulation Method for a DC-DC Converter Inductor.” IEEE Southeast Con 2018. St. Petersburg, FL, USA, 2018. [10] D. Munguia, G. Healy, “Design of High Power Planar Magnetics for a 1.8KW Phase Shifted Full Bridge Converter Using Advance FEA Electromagnetics Tools.” PCIM Europe 2019, Nuremberg, Germany, 2019. [11] B.G. You, J.S. Kim, B.K. Lee, G.B. Choi, D.W. Yoo, “Optimization of Powder Core Inductors of Buck-Boost Converters for Hybrid Electric Vehicles.” Journal of Electrical Engineering & Technology vol. 6. 4, pp 527-534, 2011. [12] H. C. Sartori, J. E. Baggio, J. R. Pinheiro, “A Comparative Design of an Optimized Boost Inductor Taking into Account Three Magnetic Materials Technologies: Volume, Cost and Efficiency Analysis.” 10th IEEE/IAS International Conference on Industry Applications. Fortaleza, Brazil, 2012. [13] M. S. Perdigão, S. F. Ferreira, M. Martins, A. S. Mendes, J. M. Alonso, “Finite Element Analysis of a Variable Inductor for an RSCC based LED Lamp Driver.” IEEE Industry Applications Society Annual Meeting. Addison, TX, USA, 2015. [14] Z. Dang, J. A. Abu Qahouq. “Permanent-Magnet Coupled Power Inductor for Multiphase DC–DC Power Converters.” IEEE Transactions on Industrial Electronics, vol. 64. 3, 2017. [15] Ferrit E1006028 core datasheet. http://ferroxcube.home.pl/prod/assets/e1006028.pdf. [16] S. Balci, N. Altin, S. Özdemir, I. Sefa, “FEM Based Parametric Analysis of AC Line Reactors.” IEEE (POWERENG) 4th International Conference on Power Engineering, Energy and Electrical Drives, Istanbul, 2013, pp 1328-1333. [17] I. Sefa, S. Balci, N. Altin, S. Ozdemir, “Comprehensive analysis of inductors for an interleaved buck converter.” IEEE 15th International Power Electronics and Motion Control Conference (EPE/PEMC 2012), Serbia, 2012. [18] A.W. Lotfi, M. A. Wilkowski. “Issues and Advances in High-Frequency Magnetics for Switching Power Supplies.” PROCEEDINGS OF THE IEEE, vol. 89. 6, 2001. [19] V. Leonaviˇcius, M. Duffy, U. Boeke, S. C. Ó Mathúna. “Comparison of Realization Techniques for PFC Inductor Operating in Discontinuous Conduction Mode.” IEEE Transactions on Power Electronics, vol. 19. 2, 2004. [20] M.K. Kazimierczuk, High-frequency magnetic components, Second Edition, Wiley, Ohio, USA, 2014. [21] M. K. Kazimierczuk, L. A. Starman. “Dynamic Performance of PWM DC-DC Boost Converter with Input Voltage Feedforward Control. IEEE Transactions on Circuits and Systems—I: Fundamental Theory and Applications.” vol. 46. 12, 1999. [22] P. Mattavelli. “Digital Control of dc-dc Boost Converters with Inductor Current Estimation.” Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, APEC '04. Anaheim, CA, USA, 2004. [23] M. Rashid, Power Electronics Devices, Circuits, And Applications Fourth Edition. NJ, USA: Pearson Education, 2014. [24] S. Iyasu, T. Shimizu, K. Ishii, “A Novel Inductor Loss Calculation Method on Power Converters Based on Dynamic Minor Loop.” IEEE European Conference on Power Electronics and Applications. Dresden, Germany, 2005. [25] W. K. Mo, K. M. Paasch, M. Sachmann, “Optimal inductor winding geometries for minimizing winding loss in gapped inductor designs.” 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe). Warsaw, Poland, 2017. [26] A. Stadler, T. Stolzke, and C. Gulden, “Nonlinear Power Inductors for Large Current Crest Factors, Hindawi Publishing Corporation, Journal of Engineering”, Article ID 687581, 6 pages, http://dx.doi.org/10.1155/2013/687581, 2013.

Ayrıntılar

Birincil Dil

İngilizce

Konular

Elektrik Mühendisliği

Bölüm

Araştırma Makalesi

Yazarlar

Yayımlanma Tarihi

30 Nisan 2020

Gönderilme Tarihi

23 Aralık 2019

Kabul Tarihi

11 Mart 2020

Yayımlandığı Sayı

Yıl 2020 Cilt: 8 Sayı: 2

DOI

https://doi.org/10.17694/bajece.664044

IZ

https://izlik.org/JA78RB78TD

Kaynak Göster

RIS / Bibtex
APA
Arıkan, P., Balcı, S., & Battal, F. (2020). Determination of the roll-off value in the air-gapped inductor of a DC-DC boost converter circuit with FEA parametric simulations. Balkan Journal of Electrical and Computer Engineering, 8(2), 135-141. https://doi.org/10.17694/bajece.664044
AMA
1.Arıkan P, Balcı S, Battal F. Determination of the roll-off value in the air-gapped inductor of a DC-DC boost converter circuit with FEA parametric simulations. Balkan Journal of Electrical and Computer Engineering. 2020;8(2):135-141. doi:10.17694/bajece.664044
Chicago
Arıkan, Pinar, Selami Balcı, ve Funda Battal. 2020. “Determination of the roll-off value in the air-gapped inductor of a DC-DC boost converter circuit with FEA parametric simulations”. Balkan Journal of Electrical and Computer Engineering 8 (2): 135-41. https://doi.org/10.17694/bajece.664044.
EndNote
Arıkan P, Balcı S, Battal F (01 Nisan 2020) Determination of the roll-off value in the air-gapped inductor of a DC-DC boost converter circuit with FEA parametric simulations. Balkan Journal of Electrical and Computer Engineering 8 2 135–141.
IEEE
[1]P. Arıkan, S. Balcı, ve F. Battal, “Determination of the roll-off value in the air-gapped inductor of a DC-DC boost converter circuit with FEA parametric simulations”, Balkan Journal of Electrical and Computer Engineering, c. 8, sy 2, ss. 135–141, Nis. 2020, doi: 10.17694/bajece.664044.
ISNAD
Arıkan, Pinar - Balcı, Selami - Battal, Funda. “Determination of the roll-off value in the air-gapped inductor of a DC-DC boost converter circuit with FEA parametric simulations”. Balkan Journal of Electrical and Computer Engineering 8/2 (01 Nisan 2020): 135-141. https://doi.org/10.17694/bajece.664044.
JAMA
1.Arıkan P, Balcı S, Battal F. Determination of the roll-off value in the air-gapped inductor of a DC-DC boost converter circuit with FEA parametric simulations. Balkan Journal of Electrical and Computer Engineering. 2020;8:135–141.
MLA
Arıkan, Pinar, vd. “Determination of the roll-off value in the air-gapped inductor of a DC-DC boost converter circuit with FEA parametric simulations”. Balkan Journal of Electrical and Computer Engineering, c. 8, sy 2, Nisan 2020, ss. 135-41, doi:10.17694/bajece.664044.
Vancouver
1.Pinar Arıkan, Selami Balcı, Funda Battal. Determination of the roll-off value in the air-gapped inductor of a DC-DC boost converter circuit with FEA parametric simulations. Balkan Journal of Electrical and Computer Engineering. 01 Nisan 2020;8(2):135-41. doi:10.17694/bajece.664044

Cited By

Performance analysis in a two-phase interleaved DC-DC boost converter with coupled inductors

International Journal of Applied Mathematics Electronics and Computers

https://doi.org/10.18100/ijamec.1195840

A comparative analysis of core material and gap sizing effect on the high-power inductor design

Engineering Science and Technology, an International Journal

https://doi.org/10.1016/j.jestch.2025.102001

A Novel Hybrid-Core Structure for Split-Core Inverter Output Transformers

Journal of Electrical Engineering & Technology

https://doi.org/10.1007/s42835-025-02440-x

Genetic Programming-Assisted Core Loss Estimation of a Powder Core Inductor: Case of DC Battery Charging Systems for EVs

International Journal of Automotive Technology

https://doi.org/10.1007/s12239-026-00464-4

All articles published by BAJECE are licensed under the Creative Commons Attribution 4.0 International License. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.Creative Commons Lisans