Lean Philosophy in Agricultural Production: A Literature Review on Türkiye

Selçuk Özcan; Zeynep Kulaksız

doi:10.15832/ankutbd.1651035

Lean Philosophy in Agricultural Production: A Literature Review on Türkiye

Abstract

This study is a review article that addresses the potential of lean production philosophy to reduce waste and increase process efficiency in the manufacturing processes of agricultural products. Lean production is widely applied, especially in the manufacturing sector, as an approach that aims to eliminate waste, optimize processes, and increase value added processes. Techniques such as Value Stream Mapping, Kaizen, 5S, and Kanban are among the basic tools of this philosophy and have produced important results such as reducing costs and increasing customer satisfaction in businesses. The application of lean production techniques in agricultural production is a relatively new field of research. In this study, studies in the literature on lean production techniques used in the production process of agricultural products are focused, and the results are evaluated. As a result of the examinations, it has been seen that lean production techniques can be successfully applied in the production process of agricultural products and provide significant improvements in processes. However, it has been determined that the studies conducted on using these techniques in agricultural production are limited. There is a serious lack of research on this subject, especially in Türkiye. This situation has brought to the agenda the need to reveal the potential of lean production techniques in agricultural production and to raise awareness to eliminate the deficiency in this field. The study aims to contribute to the literature on increasing process efficiency in agricultural production, reducing waste, and spreading lean production practices in the agricultural sector. Considering Türkiye's agricultural potential, it is evaluated that sustainable development can be achieved in the sector using lean production techniques.

Keywords

References

Aguiar A, Silva L, Parente C & Costa C A D (2020). Organizational innovation in the context of family farms: Lean diagnosis. Journal of Innovation Management 8(2): 68-86. https://doi.org/10.24840/2183-0606_008.002_0006
Al-Araidah O, Jaradat M A K & Batayneh W (2010). Using a fuzzy Poka-Yoke based controller to restrain emissions in naturally ventilated environments. Expert Systems with Applications, 37(7): 4787-4795. https://doi.org/10.1016/j.eswa.2009.12.037 Alexopoulos A, Koutras K, Ben Ali S, Puccio S, Carella A, Ottaviano R & Kalogeras A (2023). Complementary use of ground-based proximal sensing and airborne/spaceborne remote sensing techniques in precision agriculture: A systematic review. Agronomy 13(7): 1942. https://doi.org/10.3390/agronomy13071942.
Ariffien A, Adriant I & Nasution J A (2021). Lean Six Sigma analyst in packing house Lembang Agriculture Incubation Center (LAIC). Journal of Physics: Conference Series 1764(1): 012043. https://doi.org/10.1088/1742-6596/1764/1/012043
Barth H & Melin M (2018). A Green Lean approach to global competition and climate change in the agricultural sector – A Swedish case study. Journal of Cleaner Production 204: 183-192. https://doi.org/10.1016/j.jclepro.2018.09.021
Baudin M (2007). Working with machines: The nuts and bolts of lean operations with jidoka. Productivity Press. https://doi.org/10.4324/9780429272806
Bhavikatti S S A (2010). Textbook of agronomy. New Delhi: New Age International. Birgün S, Gülen K G & Özkan K (2006). The use of value stream mapping technique in the transition to lean production: An application in the manufacturing sector. İstanbul Ticaret University Journal of Science, 5(9), 47-59. https://hdl.handle.net/11467/878 (In Turkish)
Boutbagha M & El Abbadi L (2022). Production leveling or Heijunka: A bibliometric study. In 2022 IEEE 3rd International Conference on Electronics, Control, Optimization and Computer Science (ICECOCS) (pp. 1-5). Fez, Morocco. https://doi.org/10.1109/ICECOCS55148.2022.9982975
Brah S A & Chong W K (2007). Relationship between total productive maintenance and performance. International Journal of Production Research, 42(12), 2383–2401. https://doi.org/10.1080/00207540410001661418

Brunet A P & New S (2003). Kaizen in Japan: An empirical study. International Journal of Operations & Production Management 23(12): 1426-1446. https://doi.org/10.1108/01443570310506704
Carrijo P R S, Rader M L B, Batalha M O & Filho M G (2024). Lean manufacturing in agriculture: Adapting the value stream mapping approach for farm management. Operations Management Research 1(25). https://doi.org/10.1007/s12063-024-00517-w
Chen L & Meng B (2010). The application of value stream mapping based lean production system. International Journal of Business and Management, 5(6): 203-209. https://doi.org/10.5539/ijbm.v5n6p203
Colgan C, Adam G & Topolansky F (2013). Why try lean? A Northumbrian farm case study. International Journal of Agricultural Management 2(3): 170-181. http://dx.doi.org/10.22004/ag.econ.175041
Dave P Y (2020). The history of lean manufacturing by the view of Toyota-Ford. International Journal of Scientific & Engineering Research, 11(8): 1598-1602. https://www.ijser.org/researchpaper/The-History-of-Lean-Manufacturing-by-the-view-of-Toyota-Ford.pdf
Folinas D, Aidonis D, Malindretos G, Voulgarakis N & Triantafillou D (2014). Greening the agrifood supply chain with lean thinking practices. International Journal of Agricultural Resources, Governance and Ecology, 10(2): 129-145. https://doi.org/10.1504/IJARGE.2014.063580
Forno A J D, Forcellini F A & Crestani P A (2010). A abordagem enxuta aplicada ao agronegócio: Estudo de caso em um viveiro de mudas florestais. Congresso Brasileiro de Engenharia de Produção (CBEP), 12-15 October 2010, Brazil.
Fuglie K O, Morgan S & Jelliffe J (2024). World agricultural production, resource use, and productivity, 1961–2020 (Economic Information Bulletin, p. 268). U.S. Department of Agriculture. https://doi.org/10.32747/2024.8327789.ers
Gerger A (2019). Heijunka method in optimizing process variability in Industry 4.0 production process. Izmir Democracy University Social Sciences Journal 2(1): 1-17. (In Turkish)
Harris D R & Fuller D Q (2014). Agriculture: Definition and overview. In C. Smith (Ed.), Encyclopedia of Global Archaeology (pp. 104-113). Springer. https://doi.org/10.1007/978-1-4419-0465-2_64
Hasabe A, Hakde A, Khandagle A & Surve K (2019). Single minute exchange of dies (SMED) concept. International Research Journal of Engineering and Technology 6(04): 4665-4669.
Heng T G (2020). Implementation of lean manufacturing principles in a vertical farming system to reduce dependency on human labour. International Journal of Advanced Trends in Computer Science and Engineering, 9(1): 512-520. https://doi.org/10.30534/ijatcse/2020/70912020
Hiywotu A M (2025). Advancing sustainable agriculture for goal 2: zero hunger - A comprehensive overview of practices, policies, and technologies. Agroecology and Sustainable Food Systems 49(7): 1027–1055
Hualpa-Zúñiga A, Felizzola-Jiménez H, Arango-Londoño C & Rangel-Díaz J (2024). Enfoque metodológico para el aprovechamiento de mermas de transformación agrícola basado en manufactura esbelta: Caso de estudio en una finca cafetera en Colombia. Scientia Agropecuaria 15(3): 371–384. https://doi.org/10.17268/sci.agropecu.2024.028
Hussain M A, Li L, Kalu A, Wu X & Naumovski N (2025). Sustainable food security and nutritional challenges. Sustainability 17(3): 874. https://doi.org/10.3390/su17030874
Imai M (2012). Gemba Kaizen: A commonsense approach to a continuous improvement strategy (2nd ed.). McGraw-Hill Education.
Jaca C, Viles E, Paipa-Galeano L, Santos J & Mateo R (2014). Learning 5S principles from Japanese best practitioners: Case studies of five manufacturing companies. International Journal of Production Research 52(15) 4574-4586. https://doi.org/10.1080/00207543.2013.878481
Karam A A, Liviu M, Cristina V & Radu H (2018). The contribution of lean manufacturing tools to changeover time decrease in the pharmaceutical industry: A SMED project. Procedia Manufacturing, 22: 886-892. https://doi.org/10.1016/j.promfg.2018.03.125
Katayama H & Aoki R (2016). On Heijunka manufacturing system for agricultural products: 46th International Conferences on Computers and Industrial Engineering, CIE 2016. In CIE 2016: 46th International Conference on Computers and Industrial Engineering.
Kumar N, Hasan S S, Srivastava K, Akhtar R, Yadav R K & Choubey V K (2022). Lean manufacturing techniques and its implementation: A review. Materials Today: Proceedings 64(3): 1188-1192. https://doi.org/10.1016/j.matpr.2022.03.481
Lermen F H, Echeveste M E, Peralta C B, Sonego M & Marcon A (2018). A framework for selecting lean practices in sustainable product development: The case study of a Brazilian agroindustry. Journal of Cleaner Production 191: 261-272. https://doi.org/10.1016/j.jclepro.2018.04.185
Mangini C G, Da Cruz J C A, Akabane G K, Croce W D A & Dona C M (2016). Sistema lean production e o agronegócio: Uma perspectiva do uso das técnicas e ferramentas baseado nas publicações nacionais [Lean production system and agribusiness: A perspective on the use of techniques and tools based on national publications]. Anais do ENGEMA – Encontro Internacional Sobre Gestão Empresarial e Meio Ambiente.
Martins A D O, dos Anjos F E V & da Silva D O (2023). Lean farm: Application of lean production tools and concepts in agro-pastoral products. Sustainability 15(3): 2597
Melin M & Barth H (2018). Lean in Swedish agriculture: Strategic and operational perspectives. Production Planning & Control 29(10): 845 855. https://doi.org/10.1080/09537287.2018.1479784
Merdan K (2024). Turkey's agricultural sector: The past, present, and future of its agriculture. Bingöl University Journal of the Faculty of Economics and Administrative Sciences, 8(1): 47-70. https://doi.org/10.33399/biibfad.1337246 (In Turkish) Ohno T (1990). Toyota production system: Beyond large-scale production. Productivity Press.
Oliveira F B d, Forbes H, Schaefer D & Syed J M (2020). Lean principles in vertical farming: A case study. Procedia CIRP, 53rd CIRP Conference on Manufacturing Systems 93: 712-717. https://doi.org/10.1016/j.procir.2020.03.017
Omogbai O & Salonitis K (2017). The implementation of 5S lean tool using system dynamics approach. Procedia CIRP 60: 380-385. https://doi.org/10.1016/j.procir.2017.01.057
Paladugu B S & Grau D (2020). Toyota production system-monitoring construction work progress with lean principles. In Encyclopedia of Renewable and Sustainable Materials (Vol. 1–5, pp. 560-565). Elsevier. https://doi.org/10.1016/B978-0-12-803581-8.11512-7
Pandey D K & Mishra R (2024). Towards sustainable agriculture: Harnessing AI for global food security. Artificial Intelligence in Agriculture, 12: 72–84. https://doi.org/10.1016/j.aiia.2024.04.003
Pearce D, Dora M, Wesana J & Gellynck X (2021). Toward sustainable primary production through the application of lean management in South African fruit horticulture. Journal of Cleaner Production, 313, 127815. https://doi.org/10.1016/j.jclepro.2021.127815
Perdana T, Sadeli A H, Hermiatin F R & Ginanjar T (2019). Lean management in the rice industry: Case study at Widasari, Indramayu District. IOP Conference Series: Earth and Environmental Science 335(1): 012024. http://dx.doi.org/10.1088/1755-1315/335/1/012024
Plà L M, Sandars D L & Higgins A J (2017). A perspective on operational research prospects for agriculture. Journal of the Operational Research Society 65(7): 1078-1089. http://dx.doi.org/10.1057/jors.2013.45 Pourasiabi H & Pourasiabi H (2012). Just in time (JIT) production and supply chain management. International Iron & Steel Symposium (pp. 1221-1227). Karabük, Türkiye.
Romero D, Gaiardelli P, Powell D, Wuest T & Thürer M (2019). Rethinking jidoka systems under automation & learning perspectives in the digital lean manufacturing world. IFAC-PapersOnLine 52(13): 899-903. https://doi.org/10.1016/j.ifacol.2019.11.309
Satolo E G, Hiraga L E S, Goes G A & Lourenzani W L (2017). Lean production in agribusiness organizations: Multiple case studies in a developing country. International Journal of Lean Six Sigma 8(3): 335-358. http://dx.doi.org/10.1108/IJLSS-03-2016-0012
Shou W, Wang J, Wu P, Wang X & Chong H (2017). A cross-sector review on the use of value stream mapping. International Journal of Production Research 55(13): 3906-3928. http://dx.doi.org/10.1080/00207543.2017.1311031 Solano N E C, Llinás G A G & Montoya‐Torres J R (2020). Towards the integration of lean principles and optimization for agricultural production systems: A conceptual review proposition. Journal of the Science of Food and Agriculture 100(2) 453-464. https://doi.org/10.1002/jsfa.10018
Sundareswaran S, Choudhury P R, Vanitha C & Yadava D K (2023). Seed quality: Variety development to planting—An overview. Seed Science and Technology: Biology, Production, Quality, 1–16. http://dx.doi.org/10.1007/978-981-19-5888-5_1
Triana N E & Beatrix M E (2019). Production system improvement through Kanban application in labor-intensive company. Sinergi 23(1): 33-40. http://doi.org/10.22441/sinergi.2019.1.005
Trubetskaya A, McDermott O & Brophy P (2023). Implementation of a customized Lean Six Sigma methodology in a compound animal feed manufacturer in Ireland. International Journal of Lean Six Sigma 14 (5): 1075-1095
Wang G, Wang Y, Li S, Yi Y, Li C & Shin C (2024). Sustainability in global agri-food supply chains: Insights from a comprehensive literature review and the ABCDE framework. Foods 13(18): 2914. https://doi.org/10.3390/foods13182914
Womack J P & Jones D T (2003). Lean thinking: Banish waste and create wealth in your corporation (Revised and updated ed.). Free Press.
Yuniar C R, Riana W, Maa’idah U N & Rakhmawati E A (2023). Effectiveness of supply chain management using Kanban system in hospital pharmacy logistics: A case study. Airlangga Journal of Innovation Management 4(2): 125-135. https://doi.org/10.20473/ajim.v4i2.47010

Details

Primary Language

English

Subjects

Sustainable Agricultural Development, Agricultural Policy

Journal Section

Review

Authors

Selçuk Özcan ^*
0000-0001-5509-1534
Türkiye

Zeynep Kulaksız
0009-0001-8943-8855
Türkiye

Publication Date

January 20, 2026

Submission Date

March 4, 2025

Acceptance Date

September 7, 2025

Published in Issue

Year 2026 Volume: 32 Number: 1

DOI

https://doi.org/10.15832/ankutbd.1651035

IZ

https://izlik.org/JA63SF95DM

Cite

RIS / Bibtex

APA

Özcan, S., & Kulaksız, Z. (2026). Lean Philosophy in Agricultural Production: A Literature Review on Türkiye. Journal of Agricultural Sciences, 32(1), 30-41. https://doi.org/10.15832/ankutbd.1651035

AMA

1.Özcan S, Kulaksız Z. Lean Philosophy in Agricultural Production: A Literature Review on Türkiye. J Agr Sci-Tarim Bili. 2026;32(1):30-41. doi:10.15832/ankutbd.1651035

Chicago

Özcan, Selçuk, and Zeynep Kulaksız. 2026. “Lean Philosophy in Agricultural Production: A Literature Review on Türkiye”. Journal of Agricultural Sciences 32 (1): 30-41. https://doi.org/10.15832/ankutbd.1651035.

EndNote

Özcan S, Kulaksız Z (January 1, 2026) Lean Philosophy in Agricultural Production: A Literature Review on Türkiye. Journal of Agricultural Sciences 32 1 30–41.

IEEE

[1]S. Özcan and Z. Kulaksız, “Lean Philosophy in Agricultural Production: A Literature Review on Türkiye”, J Agr Sci-Tarim Bili, vol. 32, no. 1, pp. 30–41, Jan. 2026, doi: 10.15832/ankutbd.1651035.

ISNAD

Özcan, Selçuk - Kulaksız, Zeynep. “Lean Philosophy in Agricultural Production: A Literature Review on Türkiye”. Journal of Agricultural Sciences 32/1 (January 1, 2026): 30-41. https://doi.org/10.15832/ankutbd.1651035.

JAMA

1.Özcan S, Kulaksız Z. Lean Philosophy in Agricultural Production: A Literature Review on Türkiye. J Agr Sci-Tarim Bili. 2026;32:30–41.

MLA

Özcan, Selçuk, and Zeynep Kulaksız. “Lean Philosophy in Agricultural Production: A Literature Review on Türkiye”. Journal of Agricultural Sciences, vol. 32, no. 1, Jan. 2026, pp. 30-41, doi:10.15832/ankutbd.1651035.

Vancouver

1.Selçuk Özcan, Zeynep Kulaksız. Lean Philosophy in Agricultural Production: A Literature Review on Türkiye. J Agr Sci-Tarim Bili. 2026 Jan. 1;32(1):30-41. doi:10.15832/ankutbd.1651035