Response and Analysis of Permanent Magnet Synchronous Motor According to Different Reference Signals

Öz

Permanent magnet synchronous motors (PMSM) are frequently used in many applications, and so great importance in response to variable speed conditions. These engines, which are also used in electric vehicles, can be given to the best response in different road conditions. For this reason, a simulation is performed using vector control technique in MATLAB / Simulink environment. By giving different reference signals, the response of the motor is analyzed with current, speed and torque curves, and the study to be done in the future is provided with light.

Anahtar Kelimeler

• PMSM,MATLAB/Simulink,Vector control

Kaynakça

1. [1] Gümüş B., Sürekli mıknatıslı senkron motorun bulanık mantık gözlemleyicisi kullanarak vektör kontrolü, Phd Thesis, Fırat University Institute of Science and Technology, 2004, Elazığ.
2. [2] ASKER M.E., Sürekli mıknatıslı senkron motorlara vektör ve doğrudan moment kontrol yöntemlerinin uygulanması, Graduate Thesis, Fırat University, Institute of Science and Technology, 2009, Elazığ.
3. [3] Matsui N., Sensorless operation of brushless DC motor drives, Proc. of the 19th. Annual Conference of IEEE Industrial Electronics Society, Vol.2, pp.739-744 Hawaii, 1993, November 15-19.
4. [4] Lu Z. Sheng, H. Hess, H.L. and Buck, K.M, The modeling and simulation of a permanent magnet synchronous motor with direct torque control based on Matlab/Simulink, IEEE International Conference on Electric Machines and Drives, 2005, 1156-1162.
5. [5] Sünter S., Altun H, Control of a permanent magnet synchronous motor fed by a direct AC-AC converter, Electrical Engineering, Springer Verlag, 2004, New York.
6. [6] Arroyo E. L. C., Modeling and simulation of permanent magnet synchronous motor drive system, Degree Of Master Of Science In Electrical Engineering. University Of Puerto Rico Mayagüez Campus, 2006.
7. [7] Zhu D., Vector control of multiphase permanent magnet synchronous motors, Faculte Des Sciences Et De Genie Universite Laval Quebec (M. Sc.), 2006.
8. [8] Sun T., Liu C., Lu N., Gao D., Xu S., Design of PMSM Vector Control System Based on TMS320F2812 DSP, IEEE 7th International Power Electronics and Motion Control Conference-ECCE Asia, 2012, June 2-5, Harbin, China.

9. [9] Pillay P. and Krishnan R., “Modeling of permanent magnet motor drives”, IEEE Transactions on Industrial Electronics, 35(4), 1998, 537-541.