The Influence of Tool Geometry on Side Milling of CFRP with Different Cutting Tool Paths

Year 2025, Volume: 14 Issue: 3, 1549 - 1562, 30.09.2025

Sezer Morkavuk

https://doi.org/10.17798/bitlisfen.1671029

Abstract

Carbon fiber-reinforced plastics (CFRP) are extensively utilized in the aerospace, automotive, and sporting goods industries, where the combination of lightness and high strength is crucial. Conventional milling is a prevalent technique for obtaining the final dimensions and removing excess parts of CFRP components produced with different manufacturing methods. However, many damages occur during the mechanical machining of composites and these damages negatively affect the quality and service life of the composite part. The present study investigates the effects of utilizing different tool paths and end mills with varying geometries on cutting forces and machined surface quality in the side milling operation of CFRP. Results indicated that employing sinusoidal tool paths during side milling is a successful approach for reducing cutting forces and improving surface finish. On the other hand, the multi-flute performed best regarding cutting forces, whereas the 4-flute tool proved superior in obtaining better surface quality.

Keywords

Carbon , Composites , Milling , Sinusoidal milling , Tool flute , Tool path.

Ethical Statement

The study is complied with research and publication ethics.

Thanks

The author would like to thank Prof. Dr. Uğur Köklü for helping to provide the workpiece.

References

• J. Seo, D. C. Kim, H. Park, Y. S. Kang, and H. W. Park, "Advancements and Challenges in the Carbon Fiber-Reinforced Polymer (CFRP) Trimming Process", International Journal of Precision Engineering and Manufacturing-Green Technology, vol. 11, no. 4, pp. 1341-1360, 2024/07/01 2024, doi: 10.1007/s40684-023-00552-1.
• J. Seo, D. Y. Kim, D. C. Kim, and H. W. Park, "Recent Developments and Challenges on Machining of Carbon Fiber Reinforced Polymer Composite Laminates", International Journal of Precision Engineering and Manufacturing, vol. 22, no. 12, pp. 2027-2044, 2021/12/01 2021, doi: 10.1007/s12541-021-00596-w.
• J. Xu, N. Geier, J. Shen, V. Krishnaraj, and S. Samsudeensadham, "A review on CFRP drilling: fundamental mechanisms, damage issues, and approaches toward high-quality drilling", Journal of Materials Research and Technology, vol. 24, pp. 9677-9707, 2023/05/01/ 2023, doi: https://doi.org/10.1016/j.jmrt.2023.05.023.
• M. Slamani and J.-F. Chatelain, "A review on the machining of polymer composites reinforced with carbon (CFRP), glass (GFRP), and natural fibers (NFRP)", Discover Mechanical Engineering, vol. 2, no. 1, p. 4, 2023/04/03 2023, doi: 10.1007/s44245-023-00011-w.
• T. Gao et al., "Carbon fiber reinforced polymer in drilling: From damage mechanisms to suppression", Composite Structures, vol. 286, p. 115232, 2022/04/15/ 2022, doi: https://doi.org/10.1016/j.compstruct.2022.115232.
• S. Morkavuk, K. Aslantaş, L. Gemi, U. Köklü, and Ş. Yazman, "The influence of drilling-induced damages and hole quality on hoop tensile and fatigue behavior of CFRP tubes", Composites Part A: Applied Science and Manufacturing, vol. 179, p. 108005, 2024/04/01/ 2024, doi: https://doi.org/10.1016/j.compositesa.2024.108005.
• M. Haddad, R. Zitoune, H. Bougherara, F. Eyma, and B. Castanié, "Study of trimming damages of CFRP structures in function of the machining processes and their impact on the mechanical behavior", Composites Part B: Engineering, vol. 57, pp. 136-143, 2014/02/01/ 2014, doi: https://doi.org/10.1016/j.compositesb.2013.09.051.
• J. Sheikh-Ahmad, N. Urban, and H. Cheraghi, "Machining Damage in Edge Trimming of CFRP", Materials and Manufacturing Processes, vol. 27, no. 7, pp. 802-808, 2012/07/01 2012, doi: 10.1080/10426914.2011.648253.
• E. Kiliçkap, A. Yardimeden, and Y. H. Çelik, "Investigation of experimental study of end milling of CFRP composite", Science and Engineering of Composite Materials, vol. 22, no. 1, pp. 89-95, 2015, doi: doi:10.1515/secm-2013-0143.
• A. Can, "Effect of Edge Trimming Parameters on Surface Quality of Carbon Fiber Reinforced Polymer Composites", Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi, vol. 17, pp. 302-311, April 2017.
• S. Yağmur, A. Kurt, and U. Şeker, "Karbon Fiber Takviyeli Kompozit Malzemelerinin Frezelenmesinde Meydana Gelen Yüzey Pürüzlüğünün Değerlendirilmesi ve Matematiksel Modellenmesi", Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, vol. 6, no. 3, pp. 705-714, September 2018, doi: 10.29109/gujsc.411033.
• R. Prakash, V. Krishnaraj, and J. Sheikh-Ahmad, "High-speed edge trimming of carbon fiber-reinforced polymer composites using coated router tools", Journal of Composite Materials, vol. 53, no. 28-30, pp. 4189-4202, 2019, doi: 10.1177/0021998319856071.
• Q. Xu, S. Xiao, H. Gao, and H. Shen, "The propagation of fibre–matrix interface debonding during CFRP edge milling process with the multi-teeth tool: A model analysis", Composites Part A: Applied Science and Manufacturing, vol. 160, p. 107050, 2022/09/01/ 2022, doi: https://doi.org/10.1016/j.compositesa.2022.107050.
• D. J. Devan, F. Almaskari, J. Sheikh-Ahmad, and F. Hafeez, "A study on tool wear of tungsten carbide cutters in edge trimming of CFRP", Journal of Mechanical Science and Technology, vol. 36, no. 5, pp. 2499-2510, 2022/05/01 2022, doi: 10.1007/s12206-022-0432-z.
• B. Zhang et al., "Machining inclination selection method for surface milling of CFRP workpieces with low cutting-induced damage", Composite Structures, vol. 304, p. 116495, 2023/01/15/ 2023, doi: https://doi.org/10.1016/j.compstruct.2022.116495.
• Y. Chen, X. Guo, K. Zhang, D. Guo, C. Zhou, and L. Gai, "Study on the surface quality of CFRP machined by micro-textured milling tools," Journal of Manufacturing Processes, vol. 37, pp. 114-123, 2019/01/01/ 2019, doi: https://doi.org/10.1016/j.jmapro.2018.11.021.
• N. López de Lacalle, A. Lamikiz, F. J. Campa, A. F. Valdivielso, and I. Etxeberria, "Design and Test of a Multitooth Tool for CFRP Milling", Journal of Composite Materials, vol. 43, no. 26, pp. 3275-3290, 2009, doi: 10.1177/0021998309345354.
• F. Wang, B. Zhang, Z. Jia, X. Zhao, and Q. Wang, "Structural optimization method of multitooth cutter for surface damages suppression in edge trimming of Carbon Fiber Reinforced Plastics", Journal of Manufacturing Processes, vol. 46, pp. 204-213, 2019/10/01/ 2019, doi: https://doi.org/10.1016/j.jmapro.2019.09.013.
• W. Hintze and F. Brügmann, "Influence of spatial tool inclination on delamination when milling CFRP", Journal of Materials Processing Technology, vol. 252, pp. 830-837, 2018/02/01/ 2018, doi: https://doi.org/10.1016/j.jmatprotec.2017.10.041.
• Q. Wang, Y. Wu, Y. Li, D. Lu, and T. Bitoh, "Proposal of a tilted helical milling technique for high-quality hole drilling of CFRP: analysis of hole surface finish", The International Journal of Advanced Manufacturing Technology, vol. 101, no. 1, pp. 1041-1049, 2019/03/01 2019, doi: 10.1007/s00170-018-2995-5.
• D. Geng, D. Zhang, Y. Xu, F. He, D. Liu, and Z. Duan, "Rotary ultrasonic elliptical machining for side milling of CFRP: Tool performance and surface integrity", Ultrasonics, vol. 59, pp. 128-137, 2015/05/01/ 2015, doi: https://doi.org/10.1016/j.ultras.2015.02.006.
• J. Liu, G. Chen, C. Ren, X. Qin, Y. Zou, and J. Ge, "Effects of axial and longitudinal-torsional vibration on fiber removal in ultrasonic vibration helical milling of CFRP composites", Journal of Manufacturing Processes, vol. 58, pp. 868-883, 2020/10/01/ 2020, doi: https://doi.org/10.1016/j.jmapro.2020.08.071.
• Z. Sun et al., "An innovative study on high-performance milling of carbon fiber reinforced plastic by combining ultrasonic vibration assistance and optimized tool structures", Journal of Materials Research and Technology, vol. 22, pp. 2131-2146, 2023/01/01/ 2023, doi: https://doi.org/10.1016/j.jmrt.2022.12.054.
• D. Kumar and S. Gururaja, "Machining damage and surface integrity evaluation during milling of UD-CFRP laminates: Dry vs. cryogenic", Composite Structures, vol. 247, p. 112504, 2020/09/01/ 2020, doi: https://doi.org/10.1016/j.compstruct.2020.112504.
• S. Morkavuk, U. Köklü, M. Bağcı, and L. Gemi, "Cryogenic machining of carbon fiber reinforced plastic (CFRP) composites and the effects of cryogenic treatment on tensile properties: A comparative study", Composites Part B: Engineering, vol. 147, pp. 1-11, 2018/08/15/ 2018, doi: https://doi.org/10.1016/j.compositesb.2018.04.024.
• F. Zou et al., "Performance and mechanism evaluation during milling of CFRP laminates under cryogenic-based conditions", Composite Structures, vol. 277, p. 114578, 2021/12/01/ 2021, doi: https://doi.org/10.1016/j.compstruct.2021.114578.
• R. H. Inácio, R. H. L. da Silva, I. C. Pereira, and A. Hassui, "Suppressing notch wear by changing the tool path in the side milling of a Ti-6Al-4 V alloy", The International Journal of Advanced Manufacturing Technology, vol. 125, no. 1, pp. 453-463, 2023/03/01 2023, doi: 10.1007/s00170-022-10741-y.
• O. Bílek, S. Rusnáková, and M. Žaludek, "Cutting-tool performance in the end milling of carbon-fiber-reinforced plastics", Materiali in tehnologije, vol. 50, no. 5, pp. 819-822, 2016, doi: https://doi.org/10.17222/mit.2015.153.
• A. Hosokawa, N. Hirose, T. Ueda, T. Koyano, and T. Furumoto, "High-quality end milling of CFRP–Inclination milling with high-helix end mill–", International Journal of Automation Technology, vol. 10, no. 3, pp. 372-380, 2016.
• B. C. Shin, K. B. Kim, S. J. Ha, and M. W. Cho, “A study on the machinability of Carbon Fiber Reinforced Plastics on tool shape”, Journal of The Korean Society of Manufacturing Technology Engineers, vol. 20, no. 6, pp. 799-804, 2011.
• D. Ozkan, P. Panjan, M. S. Gok, and A. C. Karaoglanli, “Experimental study on tool wear and delamination in milling CFRPs with TiAlN-and TiN-coated tools”, Coatings, vol. 10, no. 7, 623, 2020.