The Effect of Boriding on the Wear Behavior of AISI 8620 Steel

Year 2025, Volume: 14 Issue: 3, 1688 - 1703, 30.09.2025

Selçuk Atasoy , Hasan Onur Tan , Hakan Adatepe , Sitki Aktaş , İbrahim Güneş

https://doi.org/10.17798/bitlisfen.1698675

Abstract

In this study, AISI 8620 steel-commonly used in the gear manufacturing industry—was subjected to a box boriding treatment using commercial Ekabor II powder. The process was carried out in an electric resistance furnace at 900 °C for a duration of 5 hours. The resulting boride layers were characterized using optical microscopy, X-ray diffraction (XRD), microhardness measurements, scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). A boride layer with an average thickness of 78 ± 2 µm was formed on the steel surface, consisting primarily of FeB and Fe₂B phases, and the surface hardness reached 1768 HV₀.₀₅. The wear tests were conducted under dry sliding conditions using a ball-on-disk setup at room temperature. The experiments were performed under a constant normal load of 10 N, at rotational speeds of 300, 450, and 600 rpm, over sliding distances of 250, 500, 750, 1000, 1500, and 2000 m. The coefficient of friction ranged between 0.40 and 0.62 throughout the tests. At higher rotational speeds, a reduction in the friction coefficient was observed up to 1000 meters, after which a gradual increase occurred at longer distances. Both the sliding distance and speed significantly affected the wear behavior, resulting in an increased wear track depth and wear rate. The wear rate was found to vary between 14.52 × 10⁻⁵ and 198.82 × 10⁻⁵ mm³N-1m-1.

Keywords

Boriding , Gear Steel , Sliding distance , wear rate , Friction coefficient.

Ethical Statement

The study is complied with research and publication ethics.

Supporting Institution

Scientific Research Projects Unit of Giresun University

Project Number

FEN-BAP-A-290224-13.

Thanks

This study was financially supported by the Scientific Research Projects Unit of Giresun University under project number FEN-BAP-A-2990224-13.

References

• M. Musa, A. G. Mohammed, and A. Muhammad, "Wear properties of boron added high strength low alloy (HSLA) SAE 8620 steel," Journal of Metals, Materials and Minerals, vol. 28, no. 1, 2018.
• R. Sankaran, D. Rajamani, S. Natarajan, and K. Thirugnanasambantham, "Sliding wear behaviour and its mechanisms of carbonitrided AISI 8620 steel at 100 C under unlubricated conditions," Surface Engineering, vol. 33, no. 1, pp. 42-48, 2017.
• J. An, Z. Su, X. Gao, Y. Yang, and S. Sun, "Corrosion characteristics of boronized AISI 8620 steel in oil field water containing H2S " Prot Met Phys Chem+, vol. 48, pp. 487-494, 2012.
• S. Tajmiri, W. Haider, and I. Shabib, "Effect of Heating Rate on Microstructure and Corrosion Resistance of Quenched and Tempered 8620 Low Carbon Alloy Steel," Corrosion and Materials Degradation, vol. 5, no. 3, pp. 370-386, 2024.
• E. H. Sabuz, M. Noor-A-Alam, W. Haider, and I. Shabib, "Improving the mechanical and electrochemical performance of additively manufactured 8620 low alloy steel via boriding," Corrosion and Materials Degradation, vol. 4, no. 4, pp. 623-643, 2023.
• E. Boyle, D. Northwood, R. Bowers, X. Sun, and P. Bauerle, "The effects of initial microstructure and heat treatment on the core mechanical properties of carburized automotive steels," in Materials Forum, vol. 32, pp. 44-54, 2008.
• M. A. Erden and F. Aydın, "Wear and mechanical properties of carburized AISI 8620 steel produced by powder metallurgy," International Journal of Minerals, Metallurgy and Materials, vol. 28, pp. 430-439, 2021.
• S. Hong, H. Lin, C. Yang, L. Tseng, and K. Lin, "Effects of heat treatment and composition modification on SAE 8620 steels," in Materials science forum, vol. 539: pp. 4452-4457, 2007.
• K. Genel and M. Demirkol, "Effect of case depth on fatigue performance of AISI 8620 carburized steel," International Journal of Fatigue, vol. 21, no. 2, pp. 207-212, 1999.
• P. Ghosh and N. Dhokey, "Refinement of tempered martensite structure and its effect on wear mechanism in SAE 8620," Tribology-Materials, Surfaces & Interfaces, vol. 10, no. 4, pp. 178-184, 2016.
• O. Kapustynskyi and L. Golovko, "Effects of laser cladding and treatment methods on wear resistance in heavy-loaded units," International journal of multidisciplinary research updates., vol. 7, no. 1, pp. 17-26, 2024.
• N. Bhadauria, S. Pandey, and P. Pandey, "Wear and enhancement of wear resistance–A review," Materials Today: Proceedings, vol. 26, pp. 2986-2991, 2020.
• N. K. Paraye, S. P. Neog, P. K. Ghosh, and S. Das, "Surface modification of AISI 8620 steel by in-situ grown TiC particle using TIG arcing," Surface and Coatings Technology, vol. 405, p. 126533, 2021.
• I. Gunes, I. Yildiz, and A. G. Çelik, "Wear Resistance and Characterization of Borided Ni-Based Alloys," Powder Metallurgy and Metal Ceramics, vol. 60, no. 11, pp. 717-726, 2022.
• M. Erdogan and S. Tekeli, "The effect of martensite volume fraction and particle size on the tensile properties of a surface-carburized AISI 8620 steel with a dual-phase core microstructure," Mater Charact, vol. 49, no. 5, pp. 445-454, 2002.
• R. Ortega-Álvarez, M. T. Hernández-Sierra, L. D. Aguilera-Camacho, M. G. Bravo-Sánchez, K. J. Moreno, and J. S. García-Miranda, "Tribological performance of 100Cr6/8620 steel bearing system under green oil lubrication," Metals, vol. 12, no. 2, p. 362, 2022.
• R. M. Triani, F. E. Mariani, L. F. D. A. Gomes, P. G. B. De Oliveira, G. E. Totten, and L. C. Casteletti, "Improvement of the tribological characteristics of AISI 8620, 8640 and 52100 steels through thermo-reactive treatments," Lubricants, vol. 7, no. 8, p. 63, 2019.
• A. Krelling, C. Da Costa, J. Milan, and E. Almeida, "Micro-abrasive wear mechanisms of borided AISI 1020 steel," Tribology International, vol. 111, pp. 234-242, 2017.
• S. K. Yaseen, H. F. Oleiwi, and H. Al-Taay, "Wear Resistance Improvement of Alloy Steel Using Laser Surface Treatment," Iraqi Journal of Industrial Research, vol. 9, no. 3, pp. 57-62, 2022.
• A. Gorlenko, S. Davydov, M. Y. Shevtsov, and D. Boldyrev, "Wear-resistance increase of friction surfaces of steel machine parts by electro-mechanical hardening," Steel in Translation, vol. 49, pp. 800-805, 2019.
• E. Hernández-Sánchez et al., "Tribological and Mechanical Behavior of Automotive Crankshaft Steel Superficially Modified Using the Boriding Hardening Process," Coatings, vol. 14, no. 6, p. 716, 2024.
• H. O. Tan, S. Atasoy, and S. Aktaş, "The Effect of Boriding Temperature and Time on the Structural and Mechanical Properties of M42 Steel," Türk Doğa ve Fen Dergisi, vol. 13, no. 2, pp. 1-5, 2024.
• I. Gunes, "Tribological Behavior and Characterization of Borided Cold-Work Tool Steel," Materials and Technology, vol. 48, no. 5, pp. 765-769, 2014.
• I. Gunes, "Wear behaviour of plasma paste boronized of AISI 8620 steel with borax and B2O3 paste mixtures," J Mater Sci Technol, vol. 29, no. 7, pp. 662-668, 2013.
• A. Milinovic, S. Simunovic, M. Keddam, and M. M. Butkovic, "Boronizing Kinetics of 30CrNiMo8 Steel," Technical Gazette, vol. 32, no. 1, pp. 176-181, 2025.
• S. U. Bayça and H. Efe, "Coating of AISI 8620 steel by boriding process: kinetic modeling, empirical formula and error analysis," Metall Res Technol, vol. 122, no. 3, 2025.
• C. Pacheco, J. L. Jeronimo, A. P. Krelling, C. E. da Costa, and J. C. G. Milan, "Influence of boriding treatment on the mechanical properties of Monel 400," Results Surf Interf, vol. 18, 2025.
• I. Gunes and I. Yıldız, "Investigation of adhesion and tribological behavior of borided AISI 310 stainless steel," Matéria (Rio de Janeiro), vol. 21, no. 1, pp. 61-71, 2016.
• I. Gunes and A. Dalar, "Effect of sliding speed on friction and wear behaviour of borided gear steels," Journal of the Balkan Tribological Association, vol. 19, no. 3, pp. 325-339, 2013.
• I. Gunes, "Effect of sliding speed on the frictional behavior and wear performance of borided and plasma-nitrided W9Mo3Cr4V high-speed steel," Materials and Technology, vol. 49, no. 1, pp. 111-116, 2015.
• R. Tyagi, D. S. Xiong, and J. L. Li, "Effect of load and sliding speed on friction and wear behavior of silver/h-BN containing Ni-base P/M composites," Wear, vol. 270, no. 7-8, pp. 423-430, 2011.
• Y. Kanca, "Effects of normal load and sliding distance on the dry sliding wear characteristics of Invar-36 superalloy," Erzincan University Journal of Science and Technology, vol. 16, no. 1, pp. 258-272, 2023.