Research Article

An Efficient Design Procedure to Implement the Fractional-Order Chaotic Jerk Systems with the Programmable Analog Platform

Volume: 3 Number: 2 November 30, 2021
EN

An Efficient Design Procedure to Implement the Fractional-Order Chaotic Jerk Systems with the Programmable Analog Platform

Abstract

An effective design procedure has been introduced for implementing the fractional order integrator structures with a modified low pass filters (LPFs) and its functionality is verified by realizing a fractional-order chaotic system. In these applications, the state variables of the fractional-order Sprott’s Jerk system are emulated by these first order LPFs. Since the discrete device based designs have the hard adjustment features and the circuit complexities; the realizations of these LPFs are carried out with the Field Programmable Analog Arrays (FPAAs), sensitively. Hence, the introduced LPF based method has been applied to the fractional order Sprott’s Jerk systems and these fractional-order systems, which are built by the several nonlinear functions, have been implemented with a programmable analog device. In this context, the minimum fractional-orders of the Sprott’s Jerk systems are calculated by considering the stability of the fractional-order nonlinear systems. After that, these systems are simulated by employing the Grünwald-Letnikov (G-L) fractional derivative method by using a common fractional-order. Thus, the stability analyses of the fractional-order Sprott’s Jerk system are supported by the numerical simulation results. After the numerical simulation stage, the design procedures of the FPAA based implementations of the Sprott’s Jerk systems have been dealt with in detail. Finally, thanks to the introduced first-order LPF method, the hardware realizations of the Sprott’s Jerk systems have been achieved successfully with a single FPAA device.

Keywords

References

  1. 1999 Chapter 7 - numerical evaluation of fractional derivatives. In Fractional Differential Equations, edited by I. Podlubny, volume 198 of Mathematics in Science and Engineering, pp. 199–221, Elsevier.
  2. Ahmad,W., R. El-Khazali, and A. Elwakil, 2001 Fractional-order wien-bridge oscillator. Electronics Letters 37: 1110–1112. Ahmad, W. M. and J. C. Sprott, 2003 Chaos in fractional-order autonomous nonlinear systems. Chaos, Solitons & Fractals 16: 339–351.
  3. Arena, P., 2000 Nonlinear noninteger order circuits and systems: an introduction, volume 38. World Scientific.
  4. Atangana, A. and B. S. T. Alkahtani, 2015 Extension of the resistance, inductance, capacitance electrical circuit to fractional derivative without singular kernel. Advances in Mechanical Engineering 7: 1687814015591937.
  5. Azar, A. T., A. G. Radwan, and S. Vaidyanathan, 2018 Mathematical Techniques of Fractional Order Systems. Elsevier.
  6. Caponetto, R., 2010 Fractional order systems: modeling and control applications, volume 72.World Scientific.
  7. Carlson, G. and C. Halijak, 1964 Approximation of fractional capacitors (1/s)ˆ(1/n) by a regular newton process. IEEE Transactions on Circuit Theory 11: 210–213.
  8. Charef, A., 2006 Analogue realisation of fractional-order integrator, differentiator and fractional piλdμ controller. IEE Proceedings- Control Theory and Applications 153: 714–720.

Details

Primary Language

English

Subjects

Electrical Engineering

Journal Section

Research Article

Publication Date

November 30, 2021

Submission Date

July 14, 2021

Acceptance Date

August 11, 2021

Published in Issue

Year 2021 Volume: 3 Number: 2

APA
Korkmaz, N., & Saçu, İ. E. (2021). An Efficient Design Procedure to Implement the Fractional-Order Chaotic Jerk Systems with the Programmable Analog Platform. Chaos Theory and Applications, 3(2), 59-66. https://doi.org/10.51537/chaos.971441
AMA
1.Korkmaz N, Saçu İE. An Efficient Design Procedure to Implement the Fractional-Order Chaotic Jerk Systems with the Programmable Analog Platform. CHTA. 2021;3(2):59-66. doi:10.51537/chaos.971441
Chicago
Korkmaz, Nimet, and İbrahim Ethem Saçu. 2021. “An Efficient Design Procedure to Implement the Fractional-Order Chaotic Jerk Systems With the Programmable Analog Platform”. Chaos Theory and Applications 3 (2): 59-66. https://doi.org/10.51537/chaos.971441.
EndNote
Korkmaz N, Saçu İE (November 1, 2021) An Efficient Design Procedure to Implement the Fractional-Order Chaotic Jerk Systems with the Programmable Analog Platform. Chaos Theory and Applications 3 2 59–66.
IEEE
[1]N. Korkmaz and İ. E. Saçu, “An Efficient Design Procedure to Implement the Fractional-Order Chaotic Jerk Systems with the Programmable Analog Platform”, CHTA, vol. 3, no. 2, pp. 59–66, Nov. 2021, doi: 10.51537/chaos.971441.
ISNAD
Korkmaz, Nimet - Saçu, İbrahim Ethem. “An Efficient Design Procedure to Implement the Fractional-Order Chaotic Jerk Systems With the Programmable Analog Platform”. Chaos Theory and Applications 3/2 (November 1, 2021): 59-66. https://doi.org/10.51537/chaos.971441.
JAMA
1.Korkmaz N, Saçu İE. An Efficient Design Procedure to Implement the Fractional-Order Chaotic Jerk Systems with the Programmable Analog Platform. CHTA. 2021;3:59–66.
MLA
Korkmaz, Nimet, and İbrahim Ethem Saçu. “An Efficient Design Procedure to Implement the Fractional-Order Chaotic Jerk Systems With the Programmable Analog Platform”. Chaos Theory and Applications, vol. 3, no. 2, Nov. 2021, pp. 59-66, doi:10.51537/chaos.971441.
Vancouver
1.Nimet Korkmaz, İbrahim Ethem Saçu. An Efficient Design Procedure to Implement the Fractional-Order Chaotic Jerk Systems with the Programmable Analog Platform. CHTA. 2021 Nov. 1;3(2):59-66. doi:10.51537/chaos.971441

Cited By

Chaos Theory and Applications in Applied Sciences and Engineering: An interdisciplinary journal of nonlinear science 23830 28903   

The published articles in CHTA are licensed under a Creative Commons Attribution-NonCommercial 4.0 International License Cc_by-nc_icon.svg