Foam Concrete And Surfactants

Abstract

Lightweight concrete types have gained attention today due to their diverse range of applications. Cellular concretes such as aerated concrete and foam concrete hold a significant place in the construction sector due to their sustainability and recyclability. These materials stand out for their high efficiency, offering properties such as thermal insulation and fire resistance. In particular, pore size and distribution in foam concrete are among the most critical factors determining the mechanical strength and insulation performance of the material. In this context, understanding the chemical composition and properties of the foaming agent in detail is essential for achieving the desired performance. Surface-active agents, known as surfactants, are important components widely used in foam concrete production. The correct selection and application methods of surfactant types are crucial for ensuring that the concrete achieves its targeted properties. This study aims to examine the characteristics of various surfactants and contribute to meeting the desired performance criteria in foam concrete production.

Keywords

• Foam concrete
• Foaming agent
• Surfactant

Köpük Beton ve Surfaktanlar

Abstract

Hafif beton türleri, günümüzde çeşitli kullanım alanlarıyla dikkat çekmektedir. Gaz beton ve köpük beton gibi hücresel betonlar, sürdürülebilirlik ve geri dönüştürülebilirlik özellikleriyle yapı sektöründe önemli bir yere sahiptir. Bu malzemeler, ısı yalıtımı ve yanmazlık gibi yüksek verimlilik sunan özellikleriyle öne çıkmaktadır. Özellikle köpük betonda, gözenek boyutu ve dağılımı, betonun mekanik dayanımı ve yalıtım performansını belirleyen en kritik faktörler arasında yer almaktadır. Bu bağlamda, kullanılan köpük ajanının kimyasal yapısı ve özelliklerinin ayrıntılı olarak bilinmesi, istenilen performansın elde edilmesi için zorunludur. Yüzey aktif maddeler, diğer adıyla surfaktanlar, köpük beton üretiminde yaygın olarak kullanılan önemli bileşenlerdir. Surfaktan türlerinin doğru seçimi ve uygulama yöntemleri, betonun hedeflenen nitelikleri kazanması açısından büyük öneme sahiptir. Bu araştırmada, farklı surfaktanların özellikleri ele alınarak, köpük betonun arzu edilen performans kriterlerini sağlamasına yönelik katkılar sunulması hedeflenmiştir.

Keywords

• Köpük beton
• Köpük ajanı
• Yüzey aktif madde

References

1. [1] Ranjani, I. S., Ramamurthy, K.. “Relative assessment of density and stability of foam produced with four synthetic surfactants,” Materials and structures, 4310, 1317-1325, 2010.
2. [2] Prishepa, I.A. Shangin, S.N. KurmangalievIn, R.M. “Vliyaniye Modifitsiruyushchikh Dobavok Na Svoystva Penoobrazovateley Tsementnykh Kompozitsiy”, Ix Mezhdunarodnaya Konferentsiya Studentov I Molodykh Uchenykh, Perspektivy Razvitiya Fundamental'nykh Nauk. 2012
3. [3] Xingjun, L., Mingli, C., Yan, L., Xin, L., Qian, L., Rong, T., Yuping, D., “A new absorbing foam concrete: preparation and microwave absorbing properties,” Advances in concrete construction, vol. 3, no. 2, pp. 103-111, 2015.
4. [4] Gao, L., “Experimental study of the effect of chemical additives on mechanical properties of foamed concrete,” Functional materials, vol. 26, no. 4, pp. 802-806, 2019.
5. [5] Sahu, S. S., and Gandhi, I. S. R., “Studies on influence of characteristics of surfactant and foam on foam concrete behaviour,” Journal of Building Engineering, vol. 40, pp. 1-16, 2021.
6. [6] Kronberg, B., Holmberg, K., and Lindman, B., “Types of surfactants, their synthesis, and applications,” Surface Chemistry of Surfactants and Polymers, pp. 1-47, 2014.
7. [7] Gerola, A. P., Costa, P. F., Quina, F. H., Fiedler, H. D., and Nome, F., “Zwitterionic surfactants in ion binding and catalysis,” Current opinion in colloid & interface science, vol. 32, pp. 39-47, 2017.
8. [8] Nakama, Y., Cosmetic Science and Technology Theoretical Principles and Applications. Kanagawa, Japan, Elsevier, 2017, Chapter 15 - Surfactants, pp. 231-244.

9. [9] Mokaya, R. (Robert A. Meyers (Ed)), Encyclopedia of Physical Science and Technology, Third Edition, California, U.S., Academic Press Inc., 2003, Mesoporous Materials Synthesis and Properties, pp. 369-381.
10. [10] Middleton, J. M., Siefert, R. L., Markie'Sha, H. J., Schrand, A. M., and Kolel-Veetil, M. K., “Micelle formation, structures, and metrology of functional metal nanoparticle compositions,” AIMS Materials Science, vol. 8, no. 4, pp. 560-586, 2021.
11. [11] Porter, M.R., Handbook of Surfactants. Cardiff, UK, Springer, 2013, pp. IX-227.
12. [12] Sahu, S. S., Gandhi, I. S. R., Khwairakpam, S., “State-of-the-art review on the characteristics of surfactants and foam from foam concrete perspective,” Journal of The Institution of Engineers India: Series A, vol. 99, pp. 391-405, 2018.
13. [13] Hayes, D. G., and Smith, G. A.. Biobased surfactants, Champaign, USA, Aocs Press, 2019, ch. 1, pp. 3-38.
14. [14] Panesar, D. K., “Cellular concrete properties and the effect of synthetic and protein foaming agents”, Construction and building materials, vol. 44, pp. 575-584, 2013.
15. [15] Bulbul Boruah, B. B., and Minti Gogoi, M. G., “Plant based natural surfactants”. Asian Journal of Home Science, vol. 8, no. 2, pp. 759-762, 2013.
16. [16] Kim, J. M., Jeong, J. Y., “Influence of foaming agents on the properties of foamed concretes having various densities,” 한국건축시공학회지, vol.12, no. 1, pp. 22-30, 2012.
17. [17] Colak, A., “Density and strength characteristics of foamed gypsum,” Cement and Concrete Composites, vol.22, no. 3, pp.193-200, 2000.
18. [18] Hajimohammadi, A., Ngo, T., Mendis, P., Kashani, A., and van Deventer, J. S., “Alkali activated slag foams: the effect of the alkali reaction on foam characteristics,” Journal Of Cleaner Production, vol. 147, pp. 330-339, 2017.
19. [19] Ghorbani, S., Sharifi, S., de Brito, J., Ghorbani, S., Jalayer, M. A., and Tavakkolizadeh, M., “Using statistical analysis and laboratory testing to evaluate the effect of magnetized water on the stability of foaming agents and foam concrete,” Construction and Building Materials, vol. 207, pp. 28-40, 2019.
20. [20] He, J., Gao, Q., Song, X., Bu, X., He, J. “Effect of foaming agent on physical and mechanical properties of alkali-activated slag foamed concrete,” Construction and Building Materials, vol. 226, pp. 280-287, 2019.
21. [21] Senff, L., Novais, R. M., Carvalheiras, J., Labrincha, J. A., “Eco-friendly approach to enhance the mechanical performance of geopolymer foams: Using glass fibre waste coming from wind blade production,”Construction and Building Materials, vol. 239, pp. 1-11, 2020.
22. [22] Davraz, M., Kilinçarslan, Ş., Koru, M., Tuzlak, F., “Investigation of relationships between ultrasonic pulse velocity and thermal conductivity coefficient in foam concretes,” Acta Physica Polonica A, vol. 130 no. 1, pp. 469-470, 2016.
23. [23] Mestnikov, A., Semenov, S., Strokova, V., Nelubova, V., “Autoclave Foam Concrete: Structure and Properties,” In Aıp Conference Proceedings, vol. 1698, no. 1, pp. 1-6, 2016.
24. [24] Oren, O. H., Gholampour, A., Gencel, O., Ozbakkaloglu, T., “Physical and mechanical properties of foam concretes containing granulated blast furnace slag as fine aggregate,” Construction and Building Materials, vol. 238, pp. 1-9, 2020.
25. [25] Ai, L., “Construction method of the new thermal insulation material foam concrete,” 6th International Conference on Management, Education, Information and Control, 2016, pp. 408-412.
26. [26] Chica, L., Alzate, A., “Cellular concrete review: New trends for application in construction,” Construction and Building Materials, vol. 200, pp. 637-647, 2019.
27. [27] Ranjani, G., Ramamurthy, K.,“Analysis of the foam generated using surfactant sodium lauryl sulfate,” International Journal of Concrete Structures and Materials, vol. 4, no.1, pp. 55-62, 2010.
28. [28] Lioumbas, J. S., Georgiou, E., Kostoglou, M., and Karapantsios, T. D., “Foam free drainage and bubbles size for surfactant concentrations below the CMC,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 487, pp. 92-103, 2015.
29. [29] Souza, M. T., Maykot, C. K., Araújo, A. C. Z., Raupp-Pereira, F., and de Oliveira, A. N., “Electrolytes’ influence on foamability and foam stability of cement suspensions,” Construction and Building Materials, vol 157, pp. 363-371, 2017.
30. [30] Tunstall, L. E., Ley, M. T., and Scherer, G. W., “Air entraining admixtures: Mechanisms, evaluations, and interactions,” Cement and Concrete Research, vol. 150, pp. 1-25, 2021.
31. [31] Johnson, P., Vaccaro, M., Starov, V., and Trybala, A., “Foam formation and interaction with porous media,” Coatings, vol. 10, pp. 1-16, 2020.
32. [32] Feneuil, B., Pitois, O., and Roussel, N., “Effect of surfactants on the yield stress of cement paste,” Cement and Concrete Research, vol. 100, pp. 32-39, 2017.
33. [33] Mortada, N., Phelipot-Mardele, A., & Lanos, C. “Effects of surfactants on aqueous foams properties: a step towards mineral foams”. European Journal of Environmental and Civil Engineering, vol. 26, no. 14, pp. 7307-7318, 2022.
34. [34] Kuzielová, E., Pach, L., and Palou, M., “Effect of activated foaming agent on the foam concrete properties,” Construction and Building Materials, vol. 125, pp. 998-1004, 2016.
35. [35] Tran, N. P., Nguyen, T. N., Ngo, T. D., Le, P. K., and Le, T. A., “Strategic progress in foam stabilisation towards high-performance foam concrete for building sustainability: A state-of-the-art review,” Journal of Cleaner Production, vol. 375, pp. 1-27. 2022.
36. [36] Gorbach, P., Shcherbin, S., and Savenkov, A., “The method of selecting a foaming agent and its concentration in the production of non-autoclaved hard cellular concrete”, In MATEC Web of Conferences, vol. 212, no. 01004, pp. 1-5, 2018.
37. [37] Boddepalli, U., Gandhi, I. S. R., and Panda, B., “Stability of three-dimensional printable foam concrete as function of surfactant characteristics,” Frontiers of Structural and Civil Engineering, vol. 17, no. 6, pp. 935-947, 2023.
38. [38] Falliano, D., Restuccia, L., and Gugliandolo, E., “A simple optimized foam generator and a study on peculiar aspects concerning foams and foamed concrete”. Construction and Building Materials, vol. 268, pp.1-16, 2021.
39. [39] He, J., Liu, G., Sang, G., He, J., and Wu, Y., “Investigation on foam stability of multi-component composite foaming agent,” Construction and Building Materials, vol. 391, pp. 1-15, 2023.
40. [40] She, W., Du, Y., Miao, C., Liu, J., Zhao, G., Jiang, J., and Zhang, Y., “Application of organic-and nanoparticle-modified foams in foamed concrete: Reinforcement and stabilization mechanisms,” Cement and Concrete Research, vol. 106, pp. 12-22, 2018.
41. [41] Xiong, Y., Zhu, Y., Chen, C., and Zhang, Y., “Effect of nano-alumina modified foaming agents on properties of foamed concrete,” Construction and Building Materials, vol. 267, pp. 1-13, 2021.
42. [42] Song, N., Li, Z., Yi, W., and Wang, S., “Properties of foam concrete with hydrophobic starch nanoparticles as foam stabilizer,” Journal of Building Engineering, vol. 56, pp. 1-12, 2022.
43. [43] Sahu, S. S., Ranjani Gandhi, I. S., Kumar, A., and Garg, S., “Evaluation of suitability of carboxymethyl cellulose in performance improvement of sodium lauryl sulfate foam and compressive strength of foam concrete,” Advances in Civil Engineering Materials, vol. 10, no. 1, pp. 74-92, 2021.
44. [44] Jiang, L., Wang, Z., Gao, X., Cui, M., Yang, Q., and Qin, J., “Effect of nanoparticles and surfactants on properties and microstructures of foam and foamed concrete,” Construction and Building Materials, vol. 411, pp.1-12, 2024.
45. [45] Zhu, H., Chen, L., Xu, J., and Han, Q., “Experimental study on performance improvement of anionic surfactant foaming agent by xanthan gum,” Construction and Building Materials, vol. 230, pp. 1-8, 2020.
46. [46] Wagh, C. D., and Gandhi, I. S. R., “Investigations on the performance of xanthan gum as a foam stabilizer and assessment of economic and environmental impacts of foam concrete production,” Journal of Building Engineering, vol. 82, pp. 1-23, 2024.
47. [47] Khwairakpam, S., Gandhi, I. S. R., and Wagh, C., “Investigations on Optimization of Extraction Process of Surfactant from Hingot Fruit (Balanites aegyptiaca) and Sesame Seed (Sesamum indicum) and Its Suitability in Foam Concrete Production,” Arabian Journal for Science and Engineering, vol. 48, no. 10, pp. 14119-14152, 2023.
48. [48] Maglad, A. M., Mydin, M. A. O., Datta, S. D., Abbood, I. S., and Tayeh, B. A., “Impact of anionic surfactant-based foaming agents on the properties of lightweight foamed concrete,” Construction and Building Materials, vol. 438, pp. 1-16, 2024.
49. [49] Xiao, M., Li, F., Yang, P., Li, B., Wei, J., and Yu, Q. “Influence of slurry characteristics on the bubble stability in foamed concrete,” Journal of Building Engineering, vol. 71, pp. 1-12, 2023.
50. [50] Yuanliang, X., Baoliang, L., Chun, C., and Yamei, Z., “Properties of foamed concrete with Ca (OH)2 as foam stabilizer”. Cement and Concrete Composites, vol. 118, pp. 1-11, 2021.
51. [51] Montayev, S. A., Shakeshev, B. T., Ryskaliyev, M. Z., Adilova, N. B., Narikov, K. A., “Collagen agent technology for foam concrete production,” ARPN J. Eng. Appl. Sci, vol. 12, no. 5, pp. 1674-1678, 2017.
52. [52] Cai, J., Zhang, G., Xie, Z., Zhu, Y. “Preparation of foaming agent from photosynthetic bacteria liquid by direct thermal alkaline treatment,” Construction and Building Materials, vol. 238, pp. 1-8, 2020.
53. [53] Masoule, M. S. T., Baffoe, E., and Ghahremaninezhad, A., “On the physicochemical properties and foaming characteristics of proteins in cement environment,” Construction and Building Materials, vol. 366, pp. 1-17, 2023.
54. [54] Kim, J. M., Kwak, E. G., Oh, K. C., Kang, C.,“Properties of bubble according to types and concentrations of concrete foaming agent,” Journal of the Korea concrete institute, vol. 232, pp. 151-158, 2011.
55. [55] Sang, G., Zhu, Y., Yang, G., Zhang, H., “Preparation and characterization of high porosity cement-based foam materia,” Construction and Building Materials, vol. 91, pp. 133-137, 2015.
56. [56] Sun, C., Zhu, Y., Guo, J., Zhang, Y., Sun, G., “Effects of foaming agent type on the workability, drying shrinkage, frost resistance and pore distribution of foamed concrete,” Construction and Building Materials, vol. 186, pp. 833-839, 2018.
57. [57] Zhang, M., Li, J., Bian, P., Gao, P., Guo, B., Zhan, B., and Yu, Q., “Investigation of the evolutionary behavior and stabilization mechanism of foams with different properties in cement paste,” Construction and Building Materials, vol. 426, pp. 1-13, 2024.
58. [58] Kashani, A., Ngo, T. D., Nguyen, T. N., Hajimohammadi, A., Sinaie, S., and Mendis, P., “The effects of surfactants on properties of lightweight concrete foam,” Magazine of concrete research, vol. 72, no. 4, pp.163-172, 2020.
59. [59] Xiong, Y., Hu, Z., Jia, Z., Liu, C., Ma, L., and Liu, Z., “Effect of formic acid as an accelerator on foam-stability, compressive strength, and pore size distribution of foam concrete,” Journal of Building Engineering, vol. 66, pp. 1-11, 2023.
60. [60] Bie, Y., Ba, S., and Chen, S., “Studies on foamed concrete micropores and their effects on stress distribution and heat conduction,” Journal of Building Engineering, vol. 87, pp. 1-11, 2024.
61. [61] Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam, ASTM C796/C796M, 2019.
62. [62] Hamad, A. J., “Materials, production, properties and application of aerated lightweight concrete,” International journal of materials science and engineering, vol.2, no. 2, pp. 152-157, 2014.
63. [63] M. Krzan, “Rheology of the wet surfactant foams and biofoams-a review,” Tech. Trans. Chem. 1-Ch, pp. 9–27, 2013.
64. [64] Amran, Y., Farzadnia, N., Ali, A., “Properties and applications of foamed concrete; a review,” Constr. Build. Mater. vol. 101, pp. 990–1005, 2015.
65. [65] Brady, K. C., Watts, G. R. A., and Jones, M. R., “Specification for foamed concrete,” Crowthorne, UK: TRL Limited, 2001, pp. 1-78.
66. [66] Yang, Q., Zhu, P., Wu, X., Huang, S., “Properties of concrete with a new type of saponin air-entraining agent,” Cement and Concrete Research, vol. 308, pp. 1313-1317, 2000.
67. [67] Aydos Chemical Industry and Trade Inc. (Jul. 10, 2023), Köpük Ajanı [Online]. Available: https://www.aydos.com.tr/tr/urunler/kopuk-ajani.
68. [68] Draco. (Jul. 10, 2023). Foam Concrete, [Online]. Available: https://www.draco.com.tr/ FOAMCRETE-i354.
69. [69] Iksa Constructıon Addıtıves Industry and Trade Inc. (2022). Accessed: Oct. 03, 2022 [Online]. Available: http://www.iksa.com.tr/pdf/bkk1.pdf.
70. [70] Milonga Inc. (2022) Accessed: Oct. 03, 2022 [Online]. Available: https://milohafifbeton.com/ ?gclid=EAIaIQobChMIvMnpzN7gIVESwYCh3glQjeEAAYASAAEgKhdvD_BwE.
71. [71] Biosaponeks. (Jun. 10, 2024), Uygulamalar. [Online]. Available: https://biosaponeks.com.tr /tr/ uygulamalar.html.
72. [72] Nanohb. (Mar. 05, 2024) Köpük Ajanı. [Online].https://www.nanohbt.com/kopuk-ajani.html.
73. [73] Artra Construction. Landscape Plastic Inc. (Oct. 10, 2022) [Online]. Available: http://www.artrainsaat.com.
74. [74] Fatsa Chemical Industry and Trade Inc. (Oct. 10, 2022). Hafif Köpük Beton Ajanı [Online]. Available: https://www.fatsakimya.com/kategori/hafif-kopuk-beton-ajani/
75. [75] Emami, H., Ayatizadeh Tanha, A., Khaksar Manshad, A., and Mohammadi, A. H., “Experimental investigation of foam flooding using anionic and nonionic surfactants: A screening scenario to assess the effects of salinity and ph on foam stability and foam height,” ACS omega, vol. 7, no. 17, pp. 14832-14847, 2022.
76. [76] Esmaily, H., Nuranian, H., “Non-autoclaved high strength cellular concrete from alkali activated slag,” Construction and Building Materials, vol. 26, no. 1, pp. 200-206, 2012.
77. [77] Falliano, D., De Domenico, D., Ricciardi, G., Gugliandolo, E., “Key factors affecting the compressive strength of foamed concrete,” In IOP Conference Series: Materials Science and Engineering, vol. 431, no. 6, pp. 1-8, 2018.
78. [78] Falliano, D., De Domenico, D., Ricciardi, G., Gugliandolo, E., “Experimental investigation on the compressive strength of foamed concrete: Effect of curing conditions, cement type, foaming agent and dry density,” Construction and Building Materials, vol. 165, pp. 735-749, 2018.
79. [79] Wang, X., Huang, J., Dai, S., Ma, B., Jiang, Q., “Investigation of silica fume as foam cell stabilizer for foamed concrete,” Construction and Building Materials, vol. 237, pp. 1-12, 2020.
80. [80] Stencel, J. M., Song, H., Cangialosi, F., “Automated foam index test: Quantifying air entraining agent addition and interactions with fly ash–cement admixtures,” Cement and Concrete Research, vol. 39, no. 4, pp. 362-370, 2009.
81. [81] Pan, Z., Li, H., Liu, W., “Preparation and characterization of super low density foamed concrete from Portland cement and admixtures,” Construction and Building Materials, vol. 72, pp. 256-261, 2014.
82. [82] Kim, J. M., Jeong, J. Y., Hwang, E. H., Shin, S. C., “Properties of foamed concrete according to types and concentrations of foam agent,” Journal of the Korea concrete institute, vol. 24, no. 1, pp. 61-70, 2012.
83. [83] Kudyakov, A. I., Kopanitsa, N. O., Sarkisov, J. S., Kasatkina, A. V., Prischepa, I. A., “Foam concrete of increased strength with the thermomodified peat additives,” In IOP Conference Series: Materials Science and Engineering, vol. 71, no. 1, pp. 1-7, 2015.
84. [84] Liu, R., Ouyang, P., Yang, Y., Qi, W., “Relationship Between FreezeThaw Resistance and AirVoid Characteristics of Foam Concrete with Hydrogen Peroxide as Foaming Agent,” Journal of The Chinese Ceramic Society, vol. 428, no. 8, pp. 1055-1063, 2014.
85. [85] Łach, M., Korniejenko, K., Mikuła, J., “Thermal insulation and thermally resistant materials made of geopolymer foams,” Procedia Eng, vol. 151, pp. 410-416, 2016.
86. [86] Samson, G., Cyr, M., “Porous structure optimisation of flash-calcined metakaolin/fly ash geopolymer foam concrete,” European Journal of Environmental and Civil Engineering, vol. 22, no. 12, pp.1482-1498, 2018.
87. [87] Steshenko, A., Kudyakov, A., Konusheva, V., Syrkin, O., “Structure formation control of foam concrete,” In AIP Conference Proceedings vol. 1800, no. 1, pp. 1-8, 2017.
88. [88] Batool, F., Bindiganavile, V., “Fresh properties of fiber reinforced cement-based foam with Pozzolans,” Iranian Journal of Science and Technology, Transactions of Civil Engineering, vol. 44, pp 253-264, 2020.
89. [89] Othuman, M. A., Wang, Y. C., “Elevated-temperature thermal properties of lightweight foamed concrete,” Construction and Building Materials, vol. 25, no. 2, pp. 705-716, 2011.
90. [90] Awang, H., Mydin, M. A. O., Roslan, A. F., “Effect of additives on mechanical and thermal properties of lightweight foamed concrete,” Advances in applied science research, vol. 3, no. 5, pp. 3326-3338, 2012.
91. [91] Awang, H., Mydin, M. A. O., Roslan, A. F., ”Mıcrostructural ınvestıgatıon of lıghtweıght foamed concrete ıncorporatıng varıous addıtıves,” International Journal of Academic Research, vol. 4, no. 2, pp. 196-200, 2012.
92. [92] Mydin, M. A. O., Wang, Y. C., “Mechanical properties of foamed concrete exposed to high temperatures,” Construction and Building Materials, vol. 26, no. 1, pp. 638-654, 2012.
93. [93] Roslan, A. F., Awang, H., Mydin, M. A. O., ” Effects of various additives on drying shrinkage, compressive and flexural strength of lightweight foamed concrete LFC,” In Advanced Materials Research, vol. 626, pp. 594-604. 2013.
94. [94] Krämer, C., Schauerte, M., Kowald, T. L., Trettin, R. H., “Three-phase-foams for foam concrete application,” Materials Characterization, vol. 102, pp. 173-179, 2015.
95. [95] Waheed, A., Arshid, M. U., Mehboob, S., Ahmed, A., Sultan, T., “Preparation of Low-Cost Foam Concrete Using Detergent,” Technical Journal, vol. 24, no. 4, pp. 1-7, 2019.
96. [96] Hilal, A. A., Thom, N. H., Dawson, A. R., “On void structure and strength of foamed concrete made without/with additives,” Construction and Building Materials, vol. 85, pp. 157-164, 2015.
97. [97] Hilal, A. A., Thom, N. H., Dawson, A. R., “On entrained pore size distribution of foamed concrete,” Construction and Building Materials, vol. 75, pp. 227-233, 2015.
98. [98] Van, L. T., Kim, D. V., Xuan, H. N., Tho, V. D., Bulgakov, B. I., Alexandrova, O. V., “Modelling of the effect of the water-cement ratios on properties foam concrete,” In Journal of Physics: Conference Series Vol. 1425, No. 1, pp. 1-9, 2019.
99. [99] Harith, I. K., ” Study on polyurethane foamed concrete for use in structural applications,” Case studies in construction materials, vol. 8, pp. 79-86, 2018.
100. [100] Long, W. W., Wang, J. S., “Study on compressive strength and moisture content of different grades density of foam concrete,” In 2015 International Conference on Material Science and Applications (ICMSA-15), 2014, pp. 167-172 .
101. [101] Bing, C., Zhen, W., Ning, L., “Experimental research on properties of high-strength foamed concrete,” Journal of materials in civil engineering, vol. 24, no. 1, pp. 113-118, 2012.
102. [102] Wei, S., Yiqiang, C., Yunsheng, Z., Jones, M. R., “Characterization and simulation of microstructure and thermal properties of foamed concrete,” Construction and building materials, vol. 47, pp. 1278-1291, 2013.
103. [103] Remadnia, A., Dheilly, R. M., Laidoudi, B., Quéneudec, M., “Use of animal proteins as foaming agent in cementitious concrete composites manufactured with recycled PET aggregates,” Construction and Building Materials, vol. 23, no. 10, pp. 3118-3123, 2009.
104. [104] Yang, K. H., Lee, K. H., Song, J. K., Gong, M. H., “Properties and sustainability of alkali-activated slag foamed concrete,” Journal of Cleaner Production, vol. 68, pp. 226-233, 2014.
105. [105] Kilincarslan, Ş., Davraz, M., Akça, M., “The effect of pumice as aggregate on the mechanical and thermal properties of foam concrete”, Arabian Journal of Geosciences, vol. 11, no. 289, 2018.
106. [106] Nambiar, E. K., Ramamurthy, K., “Shrinkage behavior of foam concrete,” Journal of materials in civil engineering, vol. 21, no. 11, pp. 631-636. 2009.
107. [107] Dayalan, J., “Experimental Study on Properties of Light Weight Foam Concrete,” International Research Journal of Engineering and Technology IRJET, vol.06, no. 5, 2019.
108. [108] Varghese, S., Ashok, A. M., Joseph, A. K., Emmanuel, S., Swathylekshmi, O. V., “A study on properties of foamed concrete with natural and synthetic foaming agent,”International Research Journal of Engineering and Technology, vol. 4, no. 3, pp. 2009-2011, 2017.
109. [109] Akthar, F. K., Evans, J. R. G., ” High porosity (> 90%) cementitious foams”, Cement and Concrete Research, vol. 40, no. 2, pp. 352-358, 2010.