Productivity Analysis of Tree-Length Harvesting using Farm Tractor in a Nordmann Fir Stand in Turkey

Yıl 2020, Cilt: 6 Sayı: 2, 78 - 86, 30.12.2020

Sadik Caglar

https://doi.org/10.33904/ejfe.843964

Öz

Because of the low investment costs, the winch equipped farm tractors usage is the most common logging technique for the primer transportation of wood-based forest products in Turkey. During the logging operations, farm tractors are commonly used for cable winching at a steep terrain while they are used for skidding operation on relatively flat terrain conditions in forest stands. The aim of this study was to evaluate the working conditions and determine the productivity of uphill winching using a farm tractor during tree length harvesting operation in a Nordmann fir stand (Abies nordmanniana). The study was conducted in Western Black Sea Region of Turkey. The average diameter and length of the forest products which were hauled from stump-site to landing areas were 17 cm and 28 m, respectively. The winching distances were ranged from 10 m to 70 m. Time analysis and field measurements related to independent variables (including winching distance, tree diameter, length and volume) were conducted while the farm tractor was winching the harvested forest products. For the farm tractor, the productivity was estimated and the cycle time prediction model was developed using the multiple regression method. It was found that the average hourly and daily productivity were 5.80 m3/hour and 46.42 m3/day for 8 hours, respectively. The most time consuming work element was winching (49.2%), followed with delay time (20.1%).

Anahtar Kelimeler

Forest harvesting, Farm tractor, Winching, Productivity

Kaynakça

• Abeli, W., 1996. Comparing productivity and costs of three subgrading machines. International Journal of Forest Engineering, 5(1):33–39.
• Akay, A., 2005. Using Farm Tractors in Small-Scale Forest Harvesting Operations, Journal of Applied Sciences Research, 1(2): 196-199.
• Aykut, T., 1985. Mechanization and its productivity in transportation of forest products, In: Proceedings of The Conference on I. National Symposium of Mechanization and its efficiency in Forestry. 8-12 July, Bolu, Turkey.
• Berendt F, Hoffmann S, Jaeger D, Prettin S, Schweier J., 2020. Application of spiroergometry to determine work metabolism related strain in the course of cable work with a mini forestry crawler. International Journal of Forest Engineering, 31(2):114-125.
• Çağlar, S., 2016. Productivity of the MB Trac 900 tractor at the mixed conifer stands: an example of Artvin forest in Turkey, In: Proceedings of The Conference on International Forestry Symposium (IFS 2016). 07-10 December, Kastamonu/Turkey.
• Eker, M., Çoban, H. O., ve Acar, H. H., 2011. Time study and productivity analysis of chainsaw mounted log debarker in southern pine forests of Turkey. African Journal of Agricultural Research, 6(10): 2146-2156.
• Ghaffariyan, M. R., 2020. General productivity predicting model for skidder working in eucalypt plantations. Eur J Forest Eng, 6(1): 1-6.
• Gülci, N., Akay, A.E., Erdaş, O., 2017. Productivity assessment of alternative timber debarking methods, Šumarski list, 9–10 (2017): 469–476.
• Gülci, S., Büyüksakallı, H., Taş, İ., Akay, A. E., 2018. Productivity analysis of timber skidding operation with farm tractor. Eur J Forest Eng, 4(1): 26-32.
• Gülci, S., 2020. Productivity of a farm tractor with single drum winch during whole-tree timber extraction, Šumarski list 1–2 (2020): 35–43.
• Gullberg, T., 1995. Evaluating Operator machine interactions in comparative time studies. J. For. Eng. 7(1): 51-61.
• Karaman A., 1997. Determination the effect of working difficulties on the production and the study on these factors relating the logging operations on the working conditions in Eastern Black Sea Forest Region [PhD dissertation]. Karadeniz Technical University, Trabzon, Turkey.
• Koutsianitis, D., Tsioras, P., 2017. Time consumption and production costs of two small-scale wood harvesting systems in Northern Greece, Small-scale Forestry, 16:19–35.
• Magagnotti, N., Aalmo, G. O., Brown, M., Spinelli, R., 2016. A New Device for Reducing Winching Cost and Worker Effort in Steep Terrain Operations, Scandinavian Journal of Forest Research, 31(6): 602-610.
• Özdamar, K., 2002. Statistical data analysis with package programs-1. (in Turkish), Kaan Publication, ISBN:975-6787-00-7, Eskişehir, Turkey.
• Öztürk, T., 2010a. Productivity of MB Trac 900 tractor at beech stands on mountainous areas in blacksea region. African Journal of Agricultural Research, 5(1): 28-33.
• Öztürk T., 2010b. Productivity of New Holland farm tractor at beech stands on mountainous areas in black sea region. Forestry Ideas, 16(1): 52-57.
• Pulkki, R., 2019. Cut-to-length, tree-length or full tree harvesting? http://flash.lakeheadu.ca/~repulkki/ctl_ft.html, (Accessed: 15 May 2020).
• Spinelli, R., Ottaviani Aalmo, G., Magagnotti, N., 2014. The effect of a slack-pulling device in reducing operator physiological workload during log winching operations. Ergonomics, 58(5):781-790.
• Türk, Y., and Gümüş S., 2010. Log skidding with farm tractors, In: Proceedings of the FORMEC 2010, Forest Engineering: Meeting the Needs of the Society and the Environment. July 11 – 14, Padova, Italy.
• Zecic, Z., Krpan, A.B.P., Vukusic, S., 2005. Productivity of C Holder 870 F tractor with double drum winch Igland 4002 in thinning beech stands. Croatian Journal of Forest Engineering, 26(2): 49–57.