Detection of Combined Faults in Squirrel Cage Induction Motors
Yıl 2018,
, 9 - 16, 20.03.2018
Mohamed Yazid Kaikaa
,
Loubna Boudjlida
Öz
The
aim of this paper is to analyze theoretically and experimentally the stator
current of an induction machine operating with mixed faults: broken rotor bars
and dynamic eccentricity (DE). An analytical explanation of the generation
mechanism of all frequencies related to the simultaneous presence of these two
defects is given. It is demonstrated that DE diagnosis is very difficult if
only stator current analysis is used. Experimental results have been presented
to validate the analytical and simulation results.
Kaynakça
- Kliman G.B. and Stein J., (1992) "Method of current signature analysis," Electric Machines and Power Systems, vol. 20, no. 5 pp. 463-474.
- Kliman G.B. , Koegl R.A. and J. Stein and M.W. Madden,(1988) “Noninvasive detection of broken rotor bars in operating induction motors”, IEEE Transactions on Energy Conversion, vol. EC-3, no. 4,pp.873-879.
- Benbouzid M. E. H. (2000) "A review of induction motors signature analysis as a medium for faults detection," IEEE Transactions on Industrial Electronics, vol. 47, pp. 984-993.
- FilliPPetti F., Franceschini G., Tassoni C. and Vas P.,( 1996) “AI thechnique in induction machine diagnosis including the speed ripple effect”, IEEE-IAS, California, , vol. 1, pp. 655 – 662.
- Faiz J., Ebrahimi B.M., Akin B. and Toliyat H.A., (2009) “Comprehensive Eccentricity Fault Diagnosis in Induction Motors Using Finite Element Method “IEEE Transactions on Magnetics, vol. 45 , no. 3, pp. 1764-1767.
- Cameron R., Thomson W.T. and Dow A.B Vibration and current monitoring for detecting airgap eccentricity in large induction motors”, IEE Proceedings-B May 1986, vol. 133, no. 3 , pp. 155-163.
- Nandi S., Ahmed S., and Toliyat H.A.,(2001) “Detection of Rotor Slot and Other Eccentricity Related Harmonics in a Three Phase Induction Motor with Different Rotor Cages,” IEEE Transactions on Energy Conversion, vol. 16, no. 3, pp. 253-260.
- [8] Joksimovic G., (2005) “Dynamic simulation of cage induction machine with air gap eccentricity, IEE Proc. Electr. Power Appl. 152 (4), pp. 803–810.
- Kaikaa M. , Hadjami M. , and khezzar A. , (2014) "Effects of the Simultaneous Presence of Static Eccentricity and Broken Rotor Bars on the Stator Current of Induction Machine," IEEE Trans. Industrial Electronics , vol. 61, n°: 5, pp 2452 – 2463.
- Kaikaa M.Y. (2014) “Effect of unbalanced supply on dynamic eccentricity fault diagnosis in induction motor,” International Journal of Applied Electromagnetics and Mechanics Volume 46, Number 4,Pages 793-808.
- Dorrell D.G.,. Thomson W.T and Roach S., (1997) "Analyse of air-gap flux, current, and vibration signals as function of combination static and dynamic air-gap eccentricity in 3-phase induction motors," IEEE Trans. Industry Applications, vol. 33, no. 1, pp. 24-34.
- Khezzar A., Hadjami M., Bessous N., Oumaamar, M.E.K. and Razik H., (2008) “Accurate Modelling of Cage Induction Machine with Analytical Evaluation of Inductances” 34th Annual Conference of the IEEE Industrial Electronics Society, IECON’08, Orlando, Floride, USA, 10-13 Nov. 2008, pp. 1112 - 1117.
Yıl 2018,
, 9 - 16, 20.03.2018
Mohamed Yazid Kaikaa
,
Loubna Boudjlida
Kaynakça
- Kliman G.B. and Stein J., (1992) "Method of current signature analysis," Electric Machines and Power Systems, vol. 20, no. 5 pp. 463-474.
- Kliman G.B. , Koegl R.A. and J. Stein and M.W. Madden,(1988) “Noninvasive detection of broken rotor bars in operating induction motors”, IEEE Transactions on Energy Conversion, vol. EC-3, no. 4,pp.873-879.
- Benbouzid M. E. H. (2000) "A review of induction motors signature analysis as a medium for faults detection," IEEE Transactions on Industrial Electronics, vol. 47, pp. 984-993.
- FilliPPetti F., Franceschini G., Tassoni C. and Vas P.,( 1996) “AI thechnique in induction machine diagnosis including the speed ripple effect”, IEEE-IAS, California, , vol. 1, pp. 655 – 662.
- Faiz J., Ebrahimi B.M., Akin B. and Toliyat H.A., (2009) “Comprehensive Eccentricity Fault Diagnosis in Induction Motors Using Finite Element Method “IEEE Transactions on Magnetics, vol. 45 , no. 3, pp. 1764-1767.
- Cameron R., Thomson W.T. and Dow A.B Vibration and current monitoring for detecting airgap eccentricity in large induction motors”, IEE Proceedings-B May 1986, vol. 133, no. 3 , pp. 155-163.
- Nandi S., Ahmed S., and Toliyat H.A.,(2001) “Detection of Rotor Slot and Other Eccentricity Related Harmonics in a Three Phase Induction Motor with Different Rotor Cages,” IEEE Transactions on Energy Conversion, vol. 16, no. 3, pp. 253-260.
- [8] Joksimovic G., (2005) “Dynamic simulation of cage induction machine with air gap eccentricity, IEE Proc. Electr. Power Appl. 152 (4), pp. 803–810.
- Kaikaa M. , Hadjami M. , and khezzar A. , (2014) "Effects of the Simultaneous Presence of Static Eccentricity and Broken Rotor Bars on the Stator Current of Induction Machine," IEEE Trans. Industrial Electronics , vol. 61, n°: 5, pp 2452 – 2463.
- Kaikaa M.Y. (2014) “Effect of unbalanced supply on dynamic eccentricity fault diagnosis in induction motor,” International Journal of Applied Electromagnetics and Mechanics Volume 46, Number 4,Pages 793-808.
- Dorrell D.G.,. Thomson W.T and Roach S., (1997) "Analyse of air-gap flux, current, and vibration signals as function of combination static and dynamic air-gap eccentricity in 3-phase induction motors," IEEE Trans. Industry Applications, vol. 33, no. 1, pp. 24-34.
- Khezzar A., Hadjami M., Bessous N., Oumaamar, M.E.K. and Razik H., (2008) “Accurate Modelling of Cage Induction Machine with Analytical Evaluation of Inductances” 34th Annual Conference of the IEEE Industrial Electronics Society, IECON’08, Orlando, Floride, USA, 10-13 Nov. 2008, pp. 1112 - 1117.