Exhaust emissions of diesel engine with CuNO3 nano additive and butanol-diesel blends

Year 2018, Volume: 2 Issue: 3, 106 - 110, 20.09.2018

İbrahim Aslan Reşitoğlu , Abdulkadir Yaşar , Ali Keskin

https://doi.org/10.26701/ems.384443

Cited By: 1

Abstract

This experimental study was focused on use of CuNO₃
as a fuel additive with butanol-diesel blends in diesel engine and its effects
on fuel specifications and emission characteristics. With this purpose, CuNO₃
nano additive was mixed with diesel-butanol and each test fuel was analyzed to
determine fuel specifications (density, viscosity, Cetane number, heating
values and copper strip corrosion). A four stroke, four cylinder direct
injection diesel engine was conducted to perform the test fuels. In
conclusions, CuNO₃ nano additive with diesel-butanol blends improved
the fuel specifications and exhaust emission characteristics of diesel engine.  

Keywords

CuNO3 nano additive , diesel engine , butanol

References

• Mwangi, J.K., Lee, W.-J., Chang, Y.-C., Chen, C.-Y., Wang, L.-C., (2015). An overview: Energy saving and pollution reduction by using green fuel blends in diesel engines. Applied Energy 159: 214–36, Doi: 10.1016/j.apenergy.2015.08.084.
• Reşitoğlu, İ.A., Altinişik, K., Keskin, A., (2015). The pollutant emissions from diesel-engine vehicles and exhaust aftertreatment systems. Clean Technologies and Environmental Policy 17(1): 15–27, Doi: 10.1007/s10098-014-0793-9.
• Çelik, M., Solmaz, H., Serdar Yücesu, H., (2015). Examination of the effects of organic based manganese fuel additive on combustion and engine performance. Fuel Processing Technology 139: 100–7, Doi: 10.1016/j.fuproc.2015.08.002.
• Shaafi, T., Velraj, R., (2015). Influence of alumina nanoparticles, ethanol and isopropanol blend as additive with diesel–soybean biodiesel blend fuel: Combustion, engine performance and emissions. Renewable Energy 80: 655–63, Doi: 10.1016/j.renene.2015.02.042.
• Keskin, A., Gürü, M., Altıparmak, D., (2011). Influence of metallic based fuel additives on performance and exhaust emissions of diesel engine. Energy Conversion and Management 52(1): 60–5, Doi: 10.1016/j.enconman.2010.06.039.
• Ghanbari, M., Najafi, G., Ghobadian, B., Yusaf, T., Carlucci, A.P., Kiani Deh Kiani, M., (2017). Performance and emission characteristics of a CI engine using nano particles additives in biodiesel-diesel blends and modeling with GP approach. Fuel 202: 699–716, Doi: 10.1016/j.fuel.2017.04.117.
• Venu, H., Madhavan, V., (2017). Effect of diethyl ether and Al2O3 nano additives in diesel-biodiesel-ethanol blends: Performance, combustion and emission characteristics. Journal of Mechanical Science and Technology 31(1): 409–20, Doi: 10.1007/s12206-016-1243-x.
• Keskin, A., Ocakoglu, K., Resitoglu, İ.A., Avsar, G., Emen, F.M., Buldum, B., (2015). Using Pd(II) and Ni(II) complexes with N , N -dimethyl- N-2-chlorobenzoylthiourea ligand as fuel additives in diesel engine. Fuel 162: 202–6, Doi: 10.1016/j.fuel.2015.09.023.
• Babu, D., Anand, R., (2017). Effect of biodiesel-diesel- n -pentanol and biodiesel-diesel- n -hexanol blends on diesel engine emission and combustion characteristics. Energy 133: 761–76, Doi: 10.1016/j.energy.2017.05.103.
• Jiang, L., Wang, Y.D., Roskilly, A.P., Xie, X.L., Zhang, Z.C., Wang, R.Z., (2018). Investigation on thermal properties of a novel fuel blend and its diesel engine performance. Energy Conversion and Management 171: 1540–8, Doi: 10.1016/j.enconman.2018.06.085.
• Nayyar, A., Sharma, D., Soni, S.L., Mathur, A., (2017). Characterization of n-butanol diesel blends on a small size variable compression ratio diesel engine: Modeling and experimental investigation. Energy Conversion and Management 150: 242–58, Doi: 10.1016/j.enconman.2017.08.031.
• Jiaqiang E., Zhang, Z., Chen, J., Pham, M., Zhao, X., Peng, Q., et al., (2018). Performance and emission evaluation of a marine diesel engine fueled by water biodiesel-diesel emulsion blends with a fuel additive of a cerium oxide nanoparticle. Energy Conversion and Management 169: 194–205, Doi: 10.1016/j.enconman.2018.05.073.
• Keskin, A., Yaşar, A., Yıldızhan, Ş., Uludamar, E., Emen, F.M., Külcü, N., (2018). Evaluation of diesel fuel-biodiesel blends with palladium and acetylferrocene based additives in a diesel engine. Fuel 216: 349–55, Doi: 10.1016/j.fuel.2017.11.154.