Green design or multiple re-useable product packaging as regards solid waste in selected areas in Awka Metropolis, Nigeria

Year 2023, Volume: 6 Issue: 3, 266 - 278, 30.09.2023

Ayorinde Oluyemi , Azuka Ogbogu-nzoiwu

https://doi.org/10.35208/ert.1285944

Cited By: 2

Abstract

This study enumerates how product packaging amount to solid wastes among other Awka MSW constituents with the view to unfold green design or multiple re-useable product packaging as achievable means of minimizing solid waste in Awka Metropolis, Nigeria. Perhaps, there are locations with well managed or minimized packaging waste; accordingly, this study includes the review of some literatures on Awka MSW so as to note the extent of studies that have been published and made available in trendy media. Thus, the study is descriptive, literature-based and naturalistic observation -based in terms of estimated counting during the visitation to the selected areas. The findings reveal that studies on solid waste characterization, health, perception, behaviour of the populace in relation to solid waste and sustainability are ubiquitous. Still, the aspect of product packaging waste in the Awka metropolis has not been extensively studied; thus, present study fills this gap by aiming at unfolding green design or multiple re-useable product packaging as achievable means of minimizing solid waste in Awka Metropolis, Nigeria. However, this study in concord with prior studies shows that the product package among other solid waste occurs in a similar way in residential locations except other locations such as markets, schools, hospitals, municipal and industrial areas which have more of the litters of non-green packaging materials. Example is the plastic package with the largest quantity of generated solid waste within selected location in relation to other solid waste. Thus, the policy approach under which producers are given significant responsibility for waste prevention/diversion of post-consumer products should be ongoing through Private - Public Sector Partnerships (PPP) harmonized with EPR. This can be done by enhancing the concern of everybody (manufactures, consumers, organizations and other entrepreneurs including waste pickers/scavengers). Situation where by producers persuade the consumers through gainful or attractive means to return used product packages can be encouraged. Thus, the present study unfolds green design or multiple reuses of product packages as a means of attaining zero waste in Awka metropolis.

Keywords

Awka Metropolis, green design, multiple reuse, product packaging, solid waste, zero waste

References

• Q. Yuan, and L. Y. Tang, “The principles in green design,” E3S Web of Conferences, Vol. 02002(259), pp. 1–6. 2021. [CrossRef]
• M.-L. Tseng, A. S. F. Chiu, R. R. Tan, and A. B. Siriban-Manalang, “Sustainable consumption and production for Asia : sustainability through green design and practice,” Journal of Cleaner Production, Vol. 40, pp. 1–5, 2013. [CrossRef]
• H. Barmaki, “The role of design in sustainable consumption: A study on sustainable food packaging,” [Master Thesis]. Istanbul Technical University, 2012.
• I. D. Paul, G. P. Bhole, and J. R. Chaudhari, “A review on Green Manufacturing : It’s important, methodology and its application,” Procedia Materials Science, Vol. 6, pp. 1644–1649, 2014. [CrossRef]
• M. Y. M. Taib, Z. M. Udin, and A. H. A. Ghani, “The collaboration of green design & technology towards buisness sustainability in Malaysian manufacturing industry,” Procedia - Social and Behavioral Sciences, Vol. 211(2), pp. 237–242, 2015. [CrossRef]
• A. S. Oluyemi, and E. B. Oladumiye, “General appraisal of the nomenclature of non-alcoholic beverages (NAB) brands,” Scholedge International Journal of Multidisciplinary & Allied Studies, Vol. 7(1), pp. 1–13, 2020.
• World Health Organization,“Our planet, our health report of the Commission on Health and Environment, World Health Organization, 1992.
• I. A. Ikhuoria, “Analysis of the special Attributes and chemical methods of solid waste management in Nigeria,” Environmental Reviews, Vol. 4(1), 2002.
• United States Environmental Protection Agency, “Disposal of municipal solid waste,” United States Environmental Protection agency, 2008.
• S. N. Uchegbu, “Issues and strategies in environmental planning and management in Nigeria Enugu,” (1st ed.), Spotlite Publishers, 2002.
• O. B. Ezeudu, C. G. Ozoegwu, and C. N. Madu, “A statistical regression method for characterization of household solid waste : A case study of awka municipality in Nigeria,” MDPI Recycling, Vol. 4(1), pp. 1–17, 2019. [CrossRef]
• S. Onwuka, and U. Ajator, “Evaluation of people’s perception on plastic waste management, a study of Nnamdi Azikiwe University in Awka Anambra State,” International Journal of Environment and Pollution Research, Vol. 6(2), pp. 54–69, 2018.
• M. L. Ozoemene, E. A. Obienusi, and E. E. Ezenwaji, “Evaluation of domestic solid waste disposal in two selected housing estates in Awka, Anambra State (case study of Udoka and Real Estates),” Journal of Environmental Earth Sciences Vol. 4(16), pp. 102–109, 2014.
• V. A. Obi, J. I. Orga, and A. E. Ogadimma, “Effect of solid waste management on sustainability of clean environment that promotes healthy living in Nigeria : A Study of (ASWAMA) Awka, Anambra State of Nigeria,” The NG-Journal of Social Development, Vol. 7(1), pp. 27–48, 2018. [CrossRef]
• U. S. Bill, N. I. Chidi, A. Christopher, and U. Ewuzie, “Survey of waste disposal methods in Awka metropolisJournal of Applied Sciences and Environmental Management, Vol. 19(2), pp. 311–316, 2015. [CrossRef]
• S. Okeke, and C. Anukwonke, “Developing an effective urban waste management system for sustainable environment: A case of Awka Capital territory, Anambra State,” Journal of Environmental Management and Safety, Vol. 7(1), pp. 42–57, 2016.
• A. U. Egbu, H. C. Umunakwe, and C. E. Ogbonna, “Behavioural and household characteristics ınfluencing solid waste generation in Awka, Anambra State, Nigeria,” Journal of Environmental Management and Safety, Vol. 6(1), pp. 1–14, 2015.
• C. Onwuekwe, and A. C. Okoye, “Solid waste management in Awka Metropolis and Public awareness : Sensitizing the populace through the use of social cartoons,” Journal of Environment Pollution and Human Health, Vol. 1(2), pp. 15–23, 2014. [CrossRef]
• E. Güneş, K. G. Bayindir, N. Aydin, and D. I. Çifçi, “Characterisation study of solid wastes : A case of districts in Tekirdağ,” Environmental Research and Technology, Vol. 5(2), pp. 148–154, 2022. [CrossRef]
• E. Görgün, K. A. Adsal, E. V. Aydın, Ç. E. Ergün, N. Keskin, A. Acar, and Ş. Ergenekon, “Deposit refund system for beverage containers as a best practice example for recycling maximization,” Environmental Research and Technology, Vol. 4(3), pp. 199–205, 2021. [CrossRef]
• P. Kamugisha, J. Ludete, and S. Mhanga, “Public private partnerships for successful solid waste management and prospects for reducing public health risks in Kinondoni Municipality-Dar es Salaam, Tanzania,” Environmental Research and Technology, Vol. 2(3), pp. 141–157, 2019. [CrossRef]
• E. B. Oladumiye, A. S. Oluyemi, and O. S. Adelabu, “The visual typicality of non-alcoholic beverage (NAB) package forms in Akure, Nigeria,” Arts and Design Studies, Vol. 66, pp. 615, 2018.