Alkali-Activated Mortars Incorporating Construction and Demolition Waste and Industrial By-products: A Fresh and Hardened State Evaluation

Abstract

This study examines the potential of alkali-activated composites to produce sustainable building materials by recycling construction and demolition waste (CDW). Various waste materials such as ground granulated blast furnace slag (GGBS), class F and C fly ash (FA), recycled waste clay brick powder (RWBP), and waste concrete powder (WCP) were used to produce different alkali-activated composites along with recycled concrete aggregate. The prepared mixtures were analyzed for their fresh-state properties, as well as their physical and mechanical characteristics, including workability, strength, ultrasonic pulse velocity (UPV), and resistance to high temperatures. The findings indicate that mixtures with class C fly ash achieved higher compressive strength, whereas F class fly ash positively affected workability and high-temperature resistance. Slag effectively enhanced the compressive strength of the alkali-activated composites. In particular, the B3 mixture (20% class F fly ash, 40% slag) exhibited a balanced set of properties in terms of workability, compressive strength, and high-temperature performance. This study provides a valuable resource for producing alkali-activated composites from CDW and industrial waste, with the potential to reduce the environmental impact of the construction sector.

Keywords

• Alkali-activated composites
• Ground granulated blast furnace slag
• Fly ash
• Recycled waste clay brick powder
• Recycled waste concrete powder and aggregate

References

1. [1] Golafshani, E. M., Kashani, A., Behnood, A., Kim, T., “Modeling the chloride migration of recycled aggregate concrete using ensemble learners for sustainable building construction”, Journal of Cleaner Production, 407, 136968, (2023). DOI: https://doi.org/10.1016/j.jclepro.2023.136968
2. [2] Ding, L., Zhang, J., Du, Q., Zhou, C., “Leaching characteristic and migration simulation of hazardous elements in recycled aggregates as subgrade scenario”, Journal of Cleaner Production, 420, 138270, (2023). DOI: https://doi.org/10.1016/j.jclepro.2023.138270
3. [3] Feng, Y., Li, J., Zhang, B., Fu, H., Chen, W., Xue, Z. Xie, J., “Concrete improvement incorporating recycled powder and aggregates treated via a combination of calcination and carbonation: The impact behaviors”, Journal of Cleaner Production, 418, 138069, (2023). DOI: https://doi.org/10.1016/j.jclepro.2023.138069
4. [4] Alahverdi, A., NajafiKani, E., “Construction wastes as raw materials for geopolymer binders”, International Journal of Civil Engineerng, 7(3), (2009).
5. [5] Ge, P., Huang, W., Zhang, J., Quan, W., Guo, Y., “Microstructural analysis of recycled brick aggregate concrete modified by silane”, Structural Concrete, 23(4): 2352-2364, (2022). DOI: https://doi.org/10.1002/suco.202100144
6. [6] Sharmin, S., Sarker, P. K., Biswas, W. K., Abousnina, R. M., & Javed, U., “Characterization of waste clay brick powder and its effect on the mechanical properties and microstructure of geopolymer mortar”, Construction and Building Materials, 412, 134848, (2024). DOI: https://doi.org/10.1016/j.conbuildmat.2023.134848
7. [7] Ahmed, J. K., N. Atmaca, and, Atmaca, N., Khoshnaw, G. J., “Building a sustainable future: An experimental study on recycled brick waste powder in engineered geopolymer composites”, Case Studies in Construction Materials, 20, e02863, (2024). DOI: https://doi.org/10.1016/j.cscm.2024.e02863
8. [8] Li, Y., Huang, L., Gao, C., Mao, Z., Qin, M., “Workability and mechanical properties of GGBS-RFBP-FA ternary composite geopolymer concrete with recycled aggregates containing recycled fireclay brick aggregates”, Construction and Building Materials, 392, 131450, (2023). DOI: https://doi.org/10.1016/j.conbuildmat.2023.131450

9. [9] Mahmoodi, O., Siad, H., Lachemi, M., Dadsetan, S., Şahmaran, M., “Optimized application of ternary brick, ceramic and concrete wastes in sustainable high strength geopolymers”, Journal of cleaner production, 338, 130650, (2022). DOI: https://doi.org/10.1016/j.jclepro.2022.130650
10. [10] Alhawat, M., Yildirim, G., Ashour, A., Ozcelikci, E., Aldemir, A., and Sahmaran, M., “A study on the influencing parameters in developing construction and demolition waste-based geopolymer concretes and their sustainability assessment”, Construction and Building Materials, 426, 136143, (2024). DOI: https://doi.org/10.1016/j.conbuildmat.2024.136143
11. [11] Roy, A., & Islam, G. S., “Geopolymer using different size fractions of recycled brick-based mixed demolition waste”, Cleaner Materials, 11, 100224, (2024). DOI: https://doi.org/10.1016/j.clema.2024.100224
12. [12] Nisa, A. U., and Singh, P., “An alkali activated geopolymer concrete brick incorporated with devri stone quarry dust”, Materials Today: Proceedings. (2023). DOI: https://doi.org/10.1016/j.matpr.2023.03.085
13. [13] Kaze, R. C., Naghizadeh, A., Tchadjie, L., Cengiz, Ö., Kamseu, E., and Chinje, F. U., “Formulation of geopolymer binder based on volcanic-scoria and clay brick wastes using rice husk ash-NaOH activator: Fresh and hardened properties”, Sustainable Chemistry and Pharmacy, 40, 101627, (2024). DOI: https://doi.org/10.1016/j.scp.2024.101627
14. [14] Kırgız, M.S., et al. “Waste marble sludge and calcined clay brick powders in conventional cement farina production for cleaner built environment”, Scientific Reports, 15(1), 3467, (2025). DOI: https://doi.org/10.1038/s41598-024-83163-3
15. [15] Yildirim, I.Z., Prezzi, M., "Use of steel slag in subgrade applications", Final Report, INDOT Office of Research and Development, FHWA/IN/JTRP-2009/32-SPR3129, Indiana, (2009). DOI: https://doi.org/10.5703/1288284314275
16. [16] Hernández-Figueirido, D., Reig, L., Melchor-Eixea, A., Roig-Flores, M., Albero, V., Piquer, A., & Pitarch, A. M., “Spalling phenomenon and fire resistance of ultrahigh-performance concrete”, Construction and Building Materials, 443, (2024). DOI: https://doi.org/10.1016/j.conbuildmat.2024.137695
17. [17] Kong, D. L., & Sanjayan, J. G., “Damage behavior of geopolymer composites exposed to elevated temperatures”, Cement and Concrete Composites, 30(10): 986-991, (2008). DOI: https://doi.org/10.1016/j.cemconcomp.2008.08.001
18. [18] Kong, D. L., Sanjayan, J. G., & Sagoe-Crentsil, K., “Factors affecting the performance of metakaolin geopolymers exposed to elevated temperatures”, Journal of Materials Science, 43, 824-831, (2008). DOI: https://doi.org/10.1007/s10853-007-2205-6