The Prediction Of Heat Transfer And Fluid Characteristics For Equilateral Triangular Bodies In Tandem Arrangement By Artificial Neural Networks

Year 2012, Volume: 25 Issue: 2 , 505 - 517 , 16.04.2012

Eyüphan Manay , Omer Comaklı Sibel Gunes Esra Akcadırcı Veysel Ozceyhan Ugur Cakır

https://izlik.org/JA59HP66AA

Abstract

The objective of this study is to investigate the effect of the spacing between equilateral dual triangular bodies symmetrically placed into the channel axis under steady state conditions on heat transfer and fluid characteristics by using artificial neural networks (ANN). The Back Propagation (BP) training algorithm was applied to train the model. The successful application proved that ANN model can be used for predicting the Nusselt number and skin friction coefficient as a convenient and effective method. The distribution of local Nusselt number, skin friction coefficient along the channel wall and overall enhancement ratio of all investigated cases are presented

Keywords

Heat transfer enhancement , tandem arrangement; triangular body; artificial neural network

References

• Eimsa-ard, S. and Promvonge P., “Experimental investigation of heat transfer and friction characteristics in a circular tube fitted with V- nozzle Communications in Heat and Mass Transfer, 33, 591-600, (2006). International
• Khaled, RA., “Heat transfer enhancement in hairy Engineering, 27:250-257 (2007). Applied Thermal
• Shoji, Y., Sato, K. and Oliver, D.R., “Heat transfer enhancement in round tube using wire coil influence of length and segmentation”, Heat Transfer-Asian Research, 32 (2): 99-107 (2003).
• Sahu, A.K., Chhabra, R.P. and Eswaran, V., “Effects of Reynolds and Prandtl numbers on heat transfer from a square cylinder in the unsteady flow regime”, International Journal of Heat and Mass Transfer, 52, 839–850 (2009).
• Turki, S., Abbassi, H. and Ben Nasrallah, S., “Two-dimensional laminar fluid flow and heat transfer in a channel with a built-in heated square cylinder”, International Journal of Thermal Sciences, 42: 1105–1113 (2003).
• Biswas, G., Laschefski, H., Mitra, N. K. and Fiebig, M., “Numerical investigations of mixed convection heat transfer in a horizontal channel with a built-in square cylinder”, Numerical Heat Transfer, Part A, 18, 173-188, (1990).
• Bharti, R.P., Chhabra, R.P. and Eswaran, V., “A numerical study of the steady forced convection heat transfer from an unconfined circular cylinder”, Heat Mass Transfer, 41, 824–833, (2005).
• 8 .Juncu, G., “A numerical study of momentum and forced convection heat transfer around two tandem circular cylinders at low Reynolds numbers”, Part II Forced convection heat transfer, International Journal of Heat Mass Transfer, 50, 3799–3808, (2007).
• Chang, B.H. and Mills, A.F., “Effect of aspect ratio on forced convection heat transfer from cylinders”, International Journal of Heat and Mass Transfer, 47:1289–1296 (2004).
• Bhattacharyya, S. and Dhinakaran, S., “Vortex shedding in shear flow past tandem square cylinders in the vicinity of a plane wall”, Journal of Fluids and Structures, 24:400–417 (2008).
• Mahir, N. and Altaç, Z., “Numerical investigation of convective heat transfer in unsteady flow past two International Journal of Heat and Fluid Flow, 29:1309–1318, (2008). arrangements”,
• Tatsutani, R.K., Devarakonda, R. and Humphrey, J.A.C., “Unsteady flow and heat transfer for cylinder pairs in a channel”, International Journal of Heat and Mass Transfer, 36:3311– 3328 (1993).
• Rosales, J.L., Ortega, A. and Humphrey, J.A.C., “A numerical simulation of the convective heat transfer in confined channel flow past square cylinders: comparison of inline and offset tandem pairs”, International Journal of Heat and Mass Transfer, 44:587–603 (2001).
• Abbassi, H., Turki, S. and Ben Nasrallah, S., “Mixed convection in a plane channel with a built-in triangular prism”, Numerical Heat Transfer, Part A, 39, 307-320 (2001).
• Chattopadhyay, H., “Augmentation of Heat Transfer in a Channel using Triangular Prism”, International Journal of Thermal Sciences, 46, 501-505 (2007).
• Kalogirou, S.A., “Applications of artificial neural- networks for energy systems”, Applied Energy, 67, 17-35 (2000).
• Li, H., Sumner, D., “Vortex shedding from two finite configuration”, Journal of Fluids and Structures, 25, 479–505, (2009). in a staggered
• Yen, S.C., San, K.C., Chuang, T.H., “Interactions of tandem square cylinders at low Reynolds numbers”, Experimental Thermal and Fluid Science, 32, 927–938 (2008). [19] Fluent 6.1.22., “User’s Guide”, Fluent Incorporated, Cavendish Court, Lebanon, NH 03766, USA, (2001). Resource Park, 10
• Menter, F.R., “Two-equation eddy-viscosity turbulence models for engineering applications”, AIAA J, 32 (8) 1598–605 (1994).
• Eiamsa-ard, S. and Promvonge, P., “Numerical study on heat transfer of turbulent channel flow over Communications in Heat and Mass Transfer, 35: 844-852 (2008). International
• Lu, B. and Jiang, P., “Experimental and numerical investigation of convection heat transfer in a rectangular Experimental Thermal and Fluid Science, 30, 513–521, (2006). angled ribs”,
• Kim, H. and Kim, K., “Shape optimization of three-dimensional channel roughened by angled ribs with RANS analysis of turbulent heat transfer”, International Journal of Heat and Mass Transfer, 49, 4013–4022, (2006).
• Kamali, R. and Binesh, A.R., “The importance of rib shape effects on the local heat transfer and flow friction characteristics of square ducts with ribbed Communications in Heat and Mass Transfer, 35 (8):1032-1040 (2008). International
• Nasiruddin and Kamran Siddiqui, M.H., “Heat transfer augmentation in a heat exchanger tube using a baffle”, International Journal of Heat and Fluid Flow, 28, 318–328. (2007).
• Ozceyhan, V., Gunes, S., Buyukalaca, O. and Altuntop, N., “Heat transfer enhancement in a tube using circular cross sectional rings separated from wall”, Applied Energy, 85 (10):988-1001 (2008).