A Study on Radiation Shielding Abilities of Some Compounds of 3d Transition Elements by Using Phy-X/PSD Code

Year 2023, , 898 - 907, 01.06.2023

Zeynep Aygun , Murat Aygün

https://doi.org/10.35378/gujs.984496

Cited By: 1

Abstract

In the present study, it was aimed to calculate the radiation-matter interaction parameters of some compounds of 3d transition elements. The radiation attenuation parameters, which are important to have knowledge about the radiation shielding potentials, were calculated by using Phy-X/PSD code in the energy range of 0.01-15 MeV. The calculated mass attenuation coefficient and effective atomic number results were compared with the experimental data which were measured at 19.63 and 22.10 keV previously and, a good agreement was achieved. In order to evaluate the shielding properties of the compounds, we also compared the mass attenuation coefficients of the compounds with ordinary concrete, steel-scrap, ilmenite-limonite and basalt-magnetite, which are widely used as radiation protective materials. According to the obtained results, it is concluded that the studied compounds have radiation shielding potentials.

Keywords

Radiation attenuation parameters, Radiation shielding, 3d transition elements

References

• [1] Mann, K.S., Kaur, B., Sidhu, G.S., Kumar, A., “Investigations of some building materials for g-rays shielding effectiveness”, Radiation Physics and Chemistry, 87: 16-25, (2013).
• [2] Issa, S.A.M., Mostafa, A.M.A., “Effect of Bi2O3 in borate-tellurite-silicate glass system for development of gamma-rays shielding materials”, Journal of Alloys and Compounds, 695: 302-310, (2017).
• [3] Zhang, L., Jia, M., Gong, J., Xia. W., “Comparison study of photon attenuation characteristics of Lead-Boron Polyethylene by MCNP code, XCOM and experimental data”, Radiation Effects and Defects in Solids, 172: 643–649, (2017).
• [4] Al-Buriahi, M.S., Tonguc, B.T., “Mass attenuation coefficients, effective atomic numbers and electron densities of some contrast agents for computed tomography”, Radiation Physics and Chemistry, 166: 1-6, (2020).
• [5] Alım, B., “Determination of Radiation Protection Features of the Ag2O Doped Boro-Tellurite Glasses Using Phy-X / PSD Software”, Journal of The Institute of Science and Technology, 10(1): 202-213, (2020).
• [6] Berger, M.J., Hubbell, J.H., XCOM: Photon Cross Sections Database, Web Version 1.2. National Institute of Standards and Technology, Gaithersburg, MD 20899, USA, (1987). available at: http://physics.nist.gov/xcom
• [7] Gerward, L., Guilbert, N., Jensen, K.B., Levring, H., “X-ray absorption in matter. Reengineering XCOM”, Radiation Physics and Chemistry, 60: 23–24, (2001).
• [8] Gerward, L., Guilbert, N., Jensen, K.B., Levring, H., “WinXCom—a program for calculating X-ray attenuation coefficients”, Radiation Physics and Chemistry, 71: 653–654, (2004).
• [9] Nowotny, R. “XMuDat: Photon attenuation data on PC”, IAEA Report IAEA-NDS 195, (1998).
• [10] Şakar, E., Özpolat, Ö.F., Alım, B., Sayyed, M.I., Kurudirek, M., “Phy-X / PSD: Development of a user friendly online software for calculation of parameters relevant to radiation shielding and dosimetry”, Radiation Physics and Chemistry, 166: 1-12, (2020).
• [11] Mann, K.S., Mann, S.S., “Py-MLBUF: Development of an online-platform for gamma-ray shielding calculations and investigations”, Annals of Nuclear Energy, 150: 107845, (2021).
• [12] Hila, F.C., Astronomo, A.A., Dingle, C.A.M., Jecong, J.F.M., Javier-Hila, A.M.V., Gili, M.B.Z., Balderasa, C.V., Lopeza, G.E.P., Guillermoa, N.R.D., Amorsolo, A.V., “EpiXS: A Windows-based program for photon attenuation, dosimetry and shielding based on EPICS2017 (ENDF/B-VIII) and EPDL97 (ENDF/B-VI.8)”, Radiation Physics and Chemistry, 182: 109331, (2021).
• [13] Agostinelli, S., Allison, J., Amako, K., Apostolakis, J., Araujo, H., Arce, P., Asai, M., Axen, D., Banerjee, S., Barrand, G., Behner, F., Bellagamba L., Boudreau, J., Broglia, L., Brunengo, A., Burkhardt, H., Chauvie, S., Chuma, J., Zschiesche, D., “Geant4—a simulation toolkit”, Nuclear Instrumentation and Methods A, 506: 250-303, (2003).
• [14] Aygun Z., Yarbasi N., Aygun M., “Spectroscopic and radiation shielding features of Nemrut, Pasinler, Sarıkamıs and Ikizdere Obsidians in Turkey: Experimental and theoretical study”, Ceramics International, 47(24): 34207-34217, (2021).
• [15] Aygun, Z., Aygun, M., “A study on usability of Ahlat ignimbrites and pumice as radiation shielding materials, by using EpiXS code”, International Journal of Environmental Science and Technology, (in press), (2021). https://doi.org/10.1007/s13762-021-03530-9
• [16] Lacomme, E., Sayyed, M.I., Sidek, H.A.A., Matori, K.A., Zaid, M.H.M., “Effect of bismuth and lithium substitution on radiation shielding properties of zinc borate glass system using Phy-X/PSD simulation”, Results in Physics, 20: 103768, (2021).
• [17] Mansour, A., Sayyed, M.I., Mahmoud, K.A., Şakar, E., Kovaleva, E.G., “Modified halloysite minerals for radiation shielding purposes”, Journal of Radiation Research and Applied Sciences, 13(1): 94-101, (2020).
• [18] Aksoy, C., “The X-Ray fluorescence parameters and radiation shielding efficiency of silver doped superconducting alloys”, Radiation Physics and Chemistry, 186: 109543, (2021).
• [19] Han, I., Demir, L., “Studies on effective atomic numbers, electron densities and mass attenuation coefficients in Au alloys”, Journal of X-ray Science and Technology, 18: 39–46, (2010).
• [20] Han, I., Demir, L., “Determination of mass attenuation coefficients, effective atomic and electron numbers for Cr, Fe and Ni alloys at different energies”, Nuclear Instrumentation and Methods B, 267: 3–8, (2009).
• [21] Han, I., Demir, L., “Studies on effective atomic numbers, electron densities from mass attenuation coefficients in TixCo1-x and CoxCu1-x alloys”, Nuclear Instrumentation and Methods B, 267: 3505–3510, (2009).
• [22] Han, I., Aygun, M., Demir, L., Sahin, Y., “Determination of effective atomic numbers for 3d transition metal alloys with a new semi-empirical approach”, Annals of Nuclear Energy, 39: 56–61, (2012).
• [23] Yılmaz, D., Boydaş, E., Cömert, E., “Determination of mass attenuation coefficients and effective atomic numbers for compounds of the 3d transition elements”, Radiation Physics and Chemistry, 125: 65–68, (2016).
• [24] Jackson, D.F., Hawkes, D.J., “X-ray attenuation coefficients of elements and mixtures”, Physics Reports 70: 169–233, (1981).
• [25] Manjunatha, H.C., “A study of gamma attenuation parameters in poly methyl methacrylate and Kapton”, Radiation Physics and Chemistry, 137: 254–259, (2017).
• [26] Wood, J., “Computational Methods in Reactor Shielding”, Elsevier, (2013).
• [27] Sakar, E., “Determination of photon-shielding features and build-up factors of nickel–silver alloys”, Radiation Physics and Chemistry, 172: 108778, (2020).
• [28] Bashter, I.I., “Calculation of radiation attenuation coefficients for shielding concretes”, Annals of Nuclear Energy, 24: 1389-1401, (1997).