Research Article
BibTex RIS Cite

An Investigation of Sintering Parameters of Ti-6Al-7Nb Fabricated by Powder Injection Molding

Year 2017, Volume: 30 Issue: 4, 502 - 512, 11.12.2017

Abstract

In this study, the optimized sintering parameters for a feedstock obtained by mixing the powder of Ti-6Al-7Nb and 31wt% binder system (comprised of high-density polyethylene, Polypropylene, PEG 20000, paraffin wax and stearic acid), were determined. In order to produce a component, Taguchi method was applied to obtain the optimum conditions. As a result of ANOVA, sintering temperature was proven to be the most effective one. It was also proven that for feedstock comprised of 69wt% Ti-6Al-7Nb powder, the suitable set of sintering parameters were as follows: sintering temperature of 1250 °C, dwell time of 60 min, heating rate of 1 °C/min, gas flow rate of 5 L/min.

References

  • [1] Lee, W.-S. and Chen, C.-W., "Dynamic mechanical properties and microstructure of Ti–6Al–7Nb biomedical alloy as function of strain rate", Materials Science and Technology, 29(9), 1055-1064, (2013).
Year 2017, Volume: 30 Issue: 4, 502 - 512, 11.12.2017

Abstract

References

  • [1] Lee, W.-S. and Chen, C.-W., "Dynamic mechanical properties and microstructure of Ti–6Al–7Nb biomedical alloy as function of strain rate", Materials Science and Technology, 29(9), 1055-1064, (2013).
There are 1 citations in total.

Details

Journal Section Mechanical Engineering
Authors

Mehmet Subaşı

Publication Date December 11, 2017
Published in Issue Year 2017 Volume: 30 Issue: 4

Cite

APA Subaşı, M. (2017). An Investigation of Sintering Parameters of Ti-6Al-7Nb Fabricated by Powder Injection Molding. Gazi University Journal of Science, 30(4), 502-512.
AMA Subaşı M. An Investigation of Sintering Parameters of Ti-6Al-7Nb Fabricated by Powder Injection Molding. Gazi University Journal of Science. December 2017;30(4):502-512.
Chicago Subaşı, Mehmet. “An Investigation of Sintering Parameters of Ti-6Al-7Nb Fabricated by Powder Injection Molding”. Gazi University Journal of Science 30, no. 4 (December 2017): 502-12.
EndNote Subaşı M (December 1, 2017) An Investigation of Sintering Parameters of Ti-6Al-7Nb Fabricated by Powder Injection Molding. Gazi University Journal of Science 30 4 502–512.
IEEE M. Subaşı, “An Investigation of Sintering Parameters of Ti-6Al-7Nb Fabricated by Powder Injection Molding”, Gazi University Journal of Science, vol. 30, no. 4, pp. 502–512, 2017.
ISNAD Subaşı, Mehmet. “An Investigation of Sintering Parameters of Ti-6Al-7Nb Fabricated by Powder Injection Molding”. Gazi University Journal of Science 30/4 (December 2017), 502-512.
JAMA Subaşı M. An Investigation of Sintering Parameters of Ti-6Al-7Nb Fabricated by Powder Injection Molding. Gazi University Journal of Science. 2017;30:502–512.
MLA Subaşı, Mehmet. “An Investigation of Sintering Parameters of Ti-6Al-7Nb Fabricated by Powder Injection Molding”. Gazi University Journal of Science, vol. 30, no. 4, 2017, pp. 502-1.
Vancouver Subaşı M. An Investigation of Sintering Parameters of Ti-6Al-7Nb Fabricated by Powder Injection Molding. Gazi University Journal of Science. 2017;30(4):502-1.