Electrical Performance Analysis of Thermoelectric Generating System with INC-MPPT Algorithm.

Year 2020, Volume: 33 Issue: 1, 74 - 88, 01.03.2020

Mohamed Elzalik , Hegazy Rezk Ramadan Mostafa Jean Thomas Emad Gameil Shehata

https://doi.org/10.35378/gujs.552480

Abstract

Thermoelectric Generator (TEG) is a new trend in renewable energy issues that utilize heat energy to produce electricity from various waste energy sources. These sources are available from natural sources like geothermal and solar heat and recovering from many industrial processes. In this paper, the electrical performance of a TEG system has been analyzed when the Incremental Conductance - maximum power point tracker (INC-MPPT) control algorithm has been applied to maximize the energy conversion efficiency. The TEG system has been simulated, implemented and tested at different values of temperature difference. Simulation and experimental results show that, the proposed control algorithm can be operated at the maximum power point (MPP) of the TEG module at any operating condition with good accuracy and low fluctuation around this point. Also, the experimental results show that, the harvested power has been duplicated by more than six times by applying the INC-MPPT algorithm (11.9W) in comparing with connection without MPPT (1.9W) at the same resistive load (16Ω), the same applied temperature and the same operating conditions.  

Keywords

Thermoelectric Generators;, DC-DC boost converter;, waste heat recovery, Incremental Conductance; MPPT, Energy Efficiency, Energy Efficiency

References

• Aranguren, P., D. Astrain, and A. Martínez. 2014. “Study of Complete Thermoelectric Generator Behavior Including Water-to-Ambient Heat Dissipation on the Cold Side.” Journal of Electronic Materials 43(6): 2320–30.Champier, Daniel. 2017. “Thermoelectric Generators: A Review of Applications.” Energy Conversion and Management 140: 167–81.Cristina, Sónia, and Azevedo Vale. 2015. “Thermoelectric Generator from Space to Automotive Sector- Model and Design for Commercial and Heavy Duty Vehicles.” (November).Danandeh, M. A., and S. M. Mousavi G. 2018. “Comparative and Comprehensive Review of Maximum Power Point Tracking Methods for PV Cells.” Renewable and Sustainable Energy Reviews 82(July 2017): 2743–67. https://doi.org/10.1016/j.rser.2017.10.009.Elzalik, M et al. 2018. “Thermoelectric Power Generation System- Simulation and Experimental Investigation.” IEEE Twentieth International Middle East Power Systems Conference (MEPCON) 978-1–5386: 320–225.Gao, H. B. et al. 2016. “Development of Stove-Powered Thermoelectric Generators: A Review.” Applied Thermal Engineering 96: 297–310.Hauke, Brigitte. 2015. “Basic Calculation of a Boost Converter’s Power Stage.” Texas Instruments (August): 1–7.He, Wei et al. 2015. “Recent Development and Application of Thermoelectric Generator and Cooler.” Applied Energy 143: 1–25. http://dx.doi.org/10.1016/j.apenergy.2014.12.075.Jiang, Lian L., R. Srivatsan, and Douglas L. Maskell. 2018. “Computational Intelligence Techniques for Maximum Power Point Tracking in PV Systems: A Review.” Renewable and Sustainable Energy Reviews 85(December 2017): 14–45.Karana, Dhruv Raj, and Rashmi Rekha Sahoo. 2018. “Effect on TEG Performance for Waste Heat Recovery of Automobiles Using MgO and ZnO Nanofluid Coolants.” Case Studies in Thermal Engineering 12(May): 358–64.Kwan, Trevor Hocksun, and Xiaofeng Wu. 2017. “The Lock-On Mechanism MPPT Algorithm as Applied to the Hybrid Photovoltaic Cell and Thermoelectric Generator System.” Applied Energy. http://dx.doi.org/10.1016/j.apenergy.2017.03.036.Lv, Song et al. 2018. “Study of Different Heat Exchange Technologies Influence on the Performance of Thermoelectric Generators.” Energy Conversion and Management 156(November 2017): 167–77.Mamur, Hayati, and Rasit Ahiska. 2015. “Application of a DC-DC Boost Converter with Maximum Power Point Tracking for Low Power Thermoelectric Generators.” Energy Conversion and Management 97: 265–72. http://dx.doi.org/10.1016/j.enconman.2015.03.068.Manikandan, S., and S. C. Kaushik. 2015. “Thermodynamic Studies and Maximum Power Point Tracking in Thermoelectric Generator-Thermoelectric Cooler Combined System.” Cryogenics 67: 52–62. http://dx.doi.org/10.1016/j.cryogenics.2015.01.008.Montecucco, Andrea, and Andrew R. Knox. 2014. “Accurate Simulation of Thermoelectric Power Generating Systems.” Applied Energy 118: 166–72. http://dx.doi.org/10.1016/j.apenergy.2013.12.028.Nithyanandam, K., and R. L. Mahajan. 2018. “Evaluation of Metal Foam Based Thermoelectric Generators for Automobile Waste Heat Recovery.” International Journal of Heat and Mass Transfer 122: 877–83. https://doi.org/10.1016/j.ijheatmasstransfer.2018.02.029.Now, U P T O, and General Description. 1962. “Experimental 5-Kw Thermoelectric Generator.” Energy 2: 275–79.Patil, Dipak S, Rachayya R Arakerimath, and Pramod V Walke. 2018. “Thermoelectric Materials and Heat Exchangers for Power Generation – A Review.” Renewable and Sustainable Energy Reviews 95(October 2017): 1–22. https://doi.org/10.1016/j.rser.2018.07.003.Qiu, Zhaoxin et al. 2015. “A High Efficiency Cascaded Thermoelectric Generation System with Power Balancing Mechanism.” Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC 2015–May(May): 647–53.Quan, Rui, Wei Zhou, Guangyou Yang, and Shuhai Quan. 2017. “A Hybrid Maximum Power Point Tracking Method for Automobile Exhaust Thermoelectric Generator.” Journal of Electronic Materials 46(5): 2676–83.Shanmugam, S., M. Eswaramoorthy, and A. R. Veerappan. 2014. “Modeling and Analysis of a Solar Parabolic Dish Thermoelectric Generator.” Energy Sources, Part A: Recovery, Utilization and Environmental Effects 36(14): 1531–39.Shanmugam, S., A. R. Veerappan, and M. Eswaramoorthy. 2014. “An Experimental Evaluation of Energy and Exergy Efficiency of a Solar Parabolic Dish Thermoelectric Power Generator.” Energy Sources, Part A: Recovery, Utilization and Environmental Effects 36(17): 1865–70.Siddique, Abu Raihan Mohammad, Shohel Mahmud, and Bill Van Heyst. 2017. “A Review of the State of the Science on Wearable Thermoelectric Power Generators (TEGs) and Their Existing Challenges.” Renewable and Sustainable Energy Reviews 73(December 2016): 730–44. http://dx.doi.org/10.1016/j.rser.2017.01.177.Stobart, Richard, M. A. Wijewardane, and Zhijia Yang. 2017. “Comprehensive Analysis of Thermoelectric Generation Systems for Automotive Applications.” Applied Thermal Engineering 112: 1433–44. http://dx.doi.org/10.1016/j.applthermaleng.2016.09.121.Sundarraj, Pradeepkumar, Susanta Sinha Roy, Robert A. Taylor, and Dipak Maity. 2016. “Performance Analysis of a Hybrid Solar Thermoelectric Generator.” Energy Sources, Part A: Recovery, Utilization and Environmental Effects 38(20): 2977–84. http://dx.doi.org/10.1080/15567036.2016.1180331.Technology, Inc., Hi-Z. “Hi-Z 14W HV Thermoelectric Generator.” Hi-Z Technology, Inc. 2(http://hi-com/wp-content/uploads/2017/05/Data-Sheet-HZ-14HV.pdf).Twaha, Ssennoga, Jie Zhu, Yuying Yan, and Bo Li. 2016. “A Comprehensive Review of Thermoelectric Technology : Materials , Applications , Modelling and Performance Improvement.” 65: 698–726.Tzeng, Sheng Chung, Tzer Ming Jeng, and Yi Liang Lin. 2014. “Parametric Study of Heat-Transfer Design on the Thermoelectric Generator System.” International Communications in Heat and Mass Transfer 52: 97–105. http://dx.doi.org/10.1016/j.icheatmasstransfer.2014.01.021.Yin, Yinong, Bharati Tudu, and Ashutosh Tiwari. 2017. “Recent Advances in Oxide Thermoelectric Materials and Modules.” Vaccum 146: 356–74. https://doi.org/10.1016/j.vacuum.2017.04.015.Yu, Chuang, and K. T. Chau. 2009. “Thermoelectric Automotive Waste Heat Energy Recovery Using Maximum Power Point Tracking.” Energy Conversion and Management 50(6): 1506–12. http://dx.doi.org/10.1016/j.enconman.2009.02.015.Zybała, Rafał et al. 2016. “Method and Apparatus for Determining Operational Parameters of Thermoelectric Modules.” Journal of Electronic Materials 45(10): 5223–31.