Occurrence of a Swirling Vortex without an Intake

Year 2021, Volume: 34 Issue: 1, 54 - 61, 01.03.2021

Kerem Taştan , Nevzat Yıldırım

https://doi.org/10.35378/gujs.704657

Cited By: 1

Abstract

In this study, mechanisms that cause the occurrence of a swirling vortex without an intake are explained. There are more than one different reasons which may cause the occurrence of an air-core vortex or a swirling-vortex flow filament within an ambient fluid. An air-core vortex or a swirling vortex flow filament can also occur in an ambient fluid media without an intake provided that the coaxial subsurface depressions and thereby the imaginary subsurface spherical sink surface sectors are hydraulically developed by any means (such as rotation of the fluid mass of spherical sector-form, impinging or penetrating jet flow, continuously entering solid body or string etc.). Although studies related to occurrence of a swirling vortex in case of an intake can be found in available literature, there are currently no studies which explains the occurrence mechanisms of a swirling vortex without an intake in detail. In this study, it is showed that the causes for the occurrence of the air-core vortex or the swirling vortex filament can be different but the main mechanism of development of the air-core vortex or the swirling vortex filament is identical for all cases. 

Keywords

Air-core vortex, Dust devil, Swirling vortex, Tornado

References

• [1] Taştan, K., Yıldırım, N., “Effects of intake geometry on the occurrence of a free-surface vortex”, Journal of Hydraulic Engineering, 144(4): 04018009, (2018).
• [2] Yıldırım, N., Eroğlu, N., Taştan, K., “Occurrences of vortices at an intake of point sink character”, Teknik Dergi, 23(1): 5799-5812, (2012).
• [3] Taştan, K., Yıldırım, N., “Flow rate along the length of the swirling vortex axis at an intake”, Teknik Dergi, https://doi.org/10.18400/tekderg.593595, (2020). (in press)
• [4] Denny, D.F., “An experimental study of air-entraining vortices in pump sumps”, Proceedings of the Institution of Mechanical Engineers, 170(2): 106-116, (1956).
• [5] Anwar, H.O.,Weller, J.A., Amphlett, M.B., “Similarity of free vortex at horizontal intake”, Journal of Hydraulic Research, 16(2): 95-106, (1978).
• [6] Jain, A.K., Ranga Raju, K.G., Garde, R.J., “Vortex formation at vertical pipe intake”, Journal of the Hydraulics Division, 104(10): 1429-1448, (1978).
• [7] Gulliver, S.J., Rindels, A.J., “Weak vortices at vertical intakes”, Journal of Hydraulic Engineering, 113(9):1101-1116, (1987).
• [8] Yıldırım, N., Kocabaş, F., “Critical submergence for intakes in open channel flow”, Journal of Hydraulic Engineering, 121(12): 900-905, (1995).
• [9] Kocabaş, F., Yıldırım, N., “Effect of circulation on critical submergence of an intake pipe”, Journal of Hydraulic Research, 40(6): 741752, (2002).
• [10] Yıldırım, N., Akay, H., Taştan, K., “Critical submergence for multiple pipe intakes by the potential flow solution”, Journal of Hydraulic Research, 49(1): 117-121, (2011).
• [11] Taştan, K., Yıldırım, N., “Effects of dimensionless parameters on air-entraining vortices”, Journal of Hydraulic Research, 48(1): 57- 64, (2010).
• [12] Sarkardeh, H., Zarrati, A.R., Roshan, R., “Effect of the intake head wall and trash rack on vortices”, Journal of Hydraulic Research, 48(1): 108-112, (2010).
• [13] Naderi, V., Farsadizadeh, D., Dalir, A. H., Arvanaghi, H., “Effect of using vertical plates on vertical intake on discharge coefficient”, Arabian Journal for Science and Engineering, 39(12): 8627- 8633, (2014).
• [14] Suerich-Gulick, F., Gaskin, S., Villeneuve, M., Parkinson, E., “Free surface intake vortices: Theoretical model and measurements”, Journal of Hydraulic Research, 52(4): 502-512, (2014).
• [15] Taştan, K., “Critical submergence for a horizontal pipe intake”, Ain Shams Engineering Journal, https://doi.org/10.1016/j.asej.2020.02.010, (2020). (in press)
• [16] Levi, E., “Vortices in hydraulic”, Journal of Hydraulic Engineering, 117(4): 399-413, (1991).