Investigation of Laser Polishing on the Surface of the Parts Produced Using Powder Bed Fusion

Yıl 2022, Cilt: 35 Sayı: 2, 695 - 699, 01.06.2022

Safak Nesli Oğuzhan Yılmaz

https://doi.org/10.35378/gujs.833781

Cited By: 1

Öz

Additive manufacturing (AM) offers high design flexibilities and challenging approaches to produce highly complicated and intricate parts, which could not be possible to be produced with traditional manufacturing methods. However, one of the significant drawbacks of AM processes is, certainly, poor surface qualities, which are not acceptable for end products. Laser polishing (LP) offers an innovative surface-finishing technique that could be used to reduce the surface roughness. This research presents the fundamentals of the LP process, experiments on the additive manufactured part surfaces and the roughness reduction. An INCONEL 625 part produced by selective laser melting (SLM) was selected as the sample for the LP experiments. The results showed that laser polishing is able to enhance the surface finish and the reduction in surface roughness can become from Ra = 10.91 µm to Ra = 2.347 µm.  

Anahtar Kelimeler

Additive manufacturing, Laser polishing, Surface roughness reduction

Kaynakça

• [1] Gora, W.S., Tian, Y.T., Cabo, A.P., Ardron, M., Maier, R.R.J., Prangnell, P., Weston, N.J., Hand, D.P., “Enhancing surface finish of additively manufactured titanium and cobalt chrome elements using laser based finishing”, Physics Procedia, 83: 258-263, (2016).
• [2] Qian, M., Xu, W., Brandt, M., Tang, H.P., “Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties”, MRS Bulletin, 41(10): 775-783, (2016).
• [3] Tian, Y., Gora, W.S., Cabo, A.P., Parimi, L.L., Hand, D.P., Tammas-Williams, S., Prangnell, P.B., “Material interactions in laser polishing powder bed additive manufactured Ti6Al4V components”, Additive Manufacturing, 20: 11-22, (2017).
• [4] Mohajerani, S., Miller, J.D., Tutunea-Fatan, O.R., Bordatchev, E.V., “Thermo-Physical Modelling of Track Width During Laser Polishing of H13 Tool Steel”, Procedia Manufacturing, 10: 708-719, (2017).
• [5] Marimuthu, S., Triantaphyllou, A., Antar, M., Wimpenny, D., Morton, H., Beard, M., “Laser polishing of selective laser melted components”, International Journal of Machine Tools and Manufacture, 95: 97-104, (2015).
• [6] Lamikiz, A., Sánchez, J.A., López de Lacalle, L.N., Arana, J.L., “Laser polishing of parts built up by selective laser sintering”, International Journal of Machine Tools and Manufacture, 47(12-13): 2040-2050, (2007).
• [7] Mai, T.A., Lim, G.C., “Micromelting and its effects on surface topography and properties in laser polishing of stainless steel”, Journal of Laser Applications, 16(4): 221-228, (2004).
• [8] Bures, M., Zetek, M., “Application of Laser Surface Polishing on Additive Manufactured Parts of Inconel 718 Nickel-Based Superalloy”, Mm Science Journal, 2020(1): 3873-3877, (2020).
• [9] Zhihao, F., Libin, L., Longfei, C., Yingchun, G., “Laser Polishing of Additive Manufactured Superalloy”, 4th CIRP Conference on Surface Integrity, 71: 150-154, (2018).
• [10] Nesli, S., Yilmaz, O., “Surface characteristics of laser polished Ti-6Al-4V parts produced by electron beam melting additive manufacturing process”, International Journal of Advanced Manufacturing Technology, 114(1): 271-289, (2021).
• [11] Witkin, D., Helvajian, H., Steffeney, L., Hansen, W., “Laser Post-Processing of Inconel 625 Made by Selective Laser Melting”, Laser 3D Manufacturing III, 9738, (2016).