Investigation of Manufacturing of a Pelton Turbine Runner of Composite Material on a 3D Printer

Year 2021, Volume: 8 Issue: 1, 24 - 34, 29.03.2021

Akil Murad Güllüoğlu , Oğuzhan Bendeş , Buğra Yılmaz , Adem Yıldız

Abstract

Nowadays, different methods are used in manufacturing sector. One of these is the production technique on 3D printers, which is also described as additive manufacturing. In this study, Pelton turbine bucket was produced from composite material (carbon + thermoplastic) on a 3D printer and tested. Analytically, the special pelton turbine bucket designed at TEMSAN has a special form structure. Through additive manufacturing, the turbine runner was manufactured faster and more cost-effectively compared to production out of steel material. Tests were carried out in TEMSAN Hydraulic Test Laboratory at 5-7.5 bar pressure range and 26 l/s and 46 l/s flow rates. The highest breaking strength value was determined as 1775 N.

Keywords

Pelton Turbine, Additive Manufacturing, Composite Turbine Runner

References

• Adhikary, P., Roy, K. P., & Mazumdar, A. (2013). Selection of hydro-turbine blade material: Application of fuzzy logic (MCDA). International Journal of Engineering Research and Applications (IJERA), 3, 426-430.
• Albertani, R. (2013) Design and Manufacturing Study of Hydroelectric Turbines Using Recycled and Natural Fibre Composites” MSc Thesis, Oregon State University, Oregon.
• Ali, S. F., Malik, F. M., Kececi, E. F., & Bal, B. (2019). Optimization of Additive Manufacturing for Layer Sticking and Dimensional Accuracy. In: Kumar, K., Zindani, D., & Davim, J. P. (Eds.), Additive Manufacturing Technologies From an Optimization Perspective (pp. 185-198). IGI Global. doi:10.4018/978-1-5225-9167-2.ch009
• Blok, L. G., Longana, M. L., Yu, H., & Woods, B. K. S. (2018). An investigation into 3D printing of fibre reinforced thermoplastic composites. Additive Manufacturing, 22, 176-186. doi:10.1016/j.addma.2018.04.039
• Caminero, M. A., Chacón, J. M., García-Moreno, I., & Rodríguez, G. P. (2018). Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling. Composites Part B: Engineering, 148, 93-103. doi:10.1016/j.compositesb.2018.04.054
• Chouhan, K, S., Kisheorey, G. R., & Shah, M. (2017). Modelling, fabrication and analysis of pelton turbine for different head and materials. International Journal of Computational Engineering Research (IJCER), 7(2), 2250-3005.
• Cousin, P., Hassan, M., Vijay, P., Robert, M., & Benmokrane, B. (2019). Chemical resistance of carbon, basalt, and glass fibres used in FRP reinforcing bars. Journal of Composite Materials, 53(26-27), 3651-3670. (2019). doi:10.1177/0021998319844306
• Dickson, A. N., Barry, J. N., McDonnell, K. A., & Dowling, D. P. (2017). Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing. Additive Manufacturing, 16, 146-152. doi:10.1016/j.addma.2017.06.004
• Dronesrate (2021). Drone Infographics : How 3D Printers Work. (Accessed:17/03/2021) dronesrate.com/drones-infographic/drone-infographics-drone-infographics-how-3d-printers-work-infographic-maybe-something-for-3d-p
• Gummer, H. J. (2009). Combating Silt Erosion in Hydraulic Turbines. (Accessed:17/03/2021) https://www.renewableenergyworld.com/2009/03/01/combating-silt-erosion-in-hydraulic-turbines
• Kussmaul, R., Zogg, M., Weiss, L., Relea, E., Jacomet, R., & Ermanni, P. (2017). Carbon Fiber Reinforced Polymers for High-dynamic Testing Machines. Procedia CIRP, 66, 10-15. doi:10.1016/j.procir.2017.03.300
• Neopane, H. P., Dahlhaug O. G., & Cervantes, M. (2011). Sediment erosion in hydraulic turbines. Global Journal of Researches in Engineering (Mechanical and Mechanics Engineering), 11(6), 17-26.
• Peng, Y., Wu Y., & Wang, K. (2018). Synergistic reinforcement of polyamide-based composites by combination of short and continuous carbon fibres via fused filament fabrication, structures. Composite Structures, 207, 232-239. doi:10.1016/j.compstruct.2018.09.014
• Shirisha, A., Vinod Kumar, V., Santosh Kumar, S., Varun, K., & Bhavana, A. (2014). Advanced composite micro-hydro turbine runner design and study its performance for power generation. Advanced Materials Manufacturing & Characterization, 4(1), 57-61. doi:10.11127/ijammc.2014.03.09
• SubsTech (2021). Flexural strength tests of ceramics, 3-point Flexure Test - Ceramics. (Accessed:17/03/2021) www.substech.com/dokuwiki/doku.php?id=flexural_strength_tests_of_ceramics
• Takagi, M., Watanabe, Y., Ikematsu, S., Hayashi, T., Fujimoto, T., & Shimatani, Y. (2014). 3D printed pelton turbine: how to produce effective technology linked with global knowledge. Energy Procedia, 61, 1593-1596. doi:10.1016/j.egypro.2014.12.179
• Thake, J. (2000). Micro-Hydro Pelton Turbine Manual: Design, Manufacture and Installation for Small-scale Hydro-power. ITDG. ISBN-13: 9781853394607
• ISO (2007). Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites. TS EN ISO 527-4
• ISO (2010). Fibre-reinforced plastic composites - Determination of flexural properties. TS EN ISO 14125
• Zhao, H., Liu, X., Zhao, W., Wang, G., & Liu, B. (2019). An Overview of Research on FDM 3D Printing Process of Continuous Fiber Reinforced Composites. Journal of Physics: Conference Series, 1213(5), 052037. doi:10.1088/1742-6596/1213/5/052037