The purpose of this study is to apply olive pomace ash Prina ash , which is the remaining pulp after the pressing of olives, to a plastic material. Prina particles transformed into the ash were mixed in Polypropylene PP polymer with a weight ratio of 0%, 1% and 3% and then molded in the injection machine. Tensile-Stress Test, impact test, SEM images and color change measurements were carried out with produced samples. The effects of prina ash ratio on the color change and mechanical properties were investigated for the availability of Prina. As a result, it was determined that an increase in prina ash ratio caused an increase in both color change and mechanical properties of the material.
Polypropylene Polymer Prina Ash Impact Test Color Change SEM.
Birincil Dil | İngilizce |
---|---|
Bölüm | Research Article |
Yazarlar | |
Yayımlanma Tarihi | 31 Aralık 2018 |
Yayımlandığı Sayı | Yıl 2018 Cilt: 5 Sayı: 4 |
Hittite Journal of Science and Engineering Creative Commons Atıf-GayriTicari 4.0 Uluslararası Lisansı (CC BY NC) ile lisanslanmıştır.