Agricultural Tractor Cabin Safety Analysis and Test Correlation

Year 2020, Volume: 4 Issue: 1, 1 - 9, 31.03.2020

Selen Sağsöz Karakulak , Emre Yetkin

https://doi.org/10.30939/ijastech..641569

Cited By: 2

Abstract

Tractors are important vehicles for agricultural fields and they are widely
used. Even if they do not be in the traffic due to their intended use, safety
of the driver is important if the tractor is rollover. In tractor, the impact
energy is provided by cabin or protective profile structure during rollover.
Safety test conditions have been established by Organization for Economic
Co-operation and Development (OECD) by determining the loads that may occur in
case of rollover. According to the standard which developed by OECD, the
effects of the energy to be generated during rollover or impact on the
structure are examined by performing tests under the specified loads. In this
study, static loading test of tractor cabins is simulated by finite element method
according to the ISO 3471 standart. Tractor cabin finite element models have
been prepared with HyperMesh and HyperCrash software. Nonlinear explicit
analysis of the model was performed under the loads applied during the test. .
The analysis were carried out using RADIOSS software, based on the operating
principle of the load carrying mechanism in order to simulate the test loads. The
finite element model is limited to the frame connection points and the
deformations are examined for three loading conditions. According to the
results which are obtained from the test, the finite element analysis of the
designed cabin was also validated.

Keywords

OECD , ROPS , Agricultural Tractors , Cabin Strength , ISO 3471

References

• Murphy, D. J., (2002). Summary of Fatal Farm Incidents, 34 Incidents, Pennsylvania State University, Department of Ag-ricultural and Biological Engineering.
• Shende R., Kshirsagar V.P. Shelke.(2016). Design and Op-timization of Tractor Roll Over Protective Structure, IJDER, 4(3), 933-939.
• Oecd Code 4, (2005), Standard Code for the Official Testing of Protective Structures on Agricultural and Forestry Trac-tors. Organization for Economic Co-operation and Devel-opment.
• Lenain R., Hugo E., Langle T., (2010). Sensitivity of the Absorbed Energy into a ROPS During a Rollover Situation: Comparison to the Security Level Proposed into OECD Code 4. International Conference on Agricultural Engineer-ing.
• Blanco D., Martin C., Ortalde A., (2016). Virtual ROPS and FOPS Testing on Agricultural Tractors According to OECD Standard Code 4 and 10. 14th International LS-DYNA Users Conference.
• Bargetti S., Robolotti F., Rota F., (2015). Development of a Model for the Simulation of ROPS Tests on Agricultural Tractors Cabin: Numerical Models and Experimental Verifi-cation. Int. Journal of Engineering Research and Applica-tions, 5(9), 76-86.
• Molari G., Badodi M., Guarnieri A., (2010). FEM Analy-sis of ROPS for Agricultural Self-Moving Machines. Inter-national Conference Ragusa.
• Myers, M. L., (2000). Prevention Effectiveness of Rollover Protective Structures, Journal of Agricultural Safety and Health, 6(1): 29-40.
• Silleli H., Taşbaş H., Çay İ.C., (2009). Tarım ve Orman Traktörlerinde Ön Sert Bölgenin Değerlendirilmesi Üzerine Bir Araştırma, Tarım Bilimleri Dergisi, 15(2), 166-172
• ISO 3471, (2008). Earth-moving machinery – Roll-over protective structures – Labrotary tests and per-formance requirements. International Standard.
• ISO 3164, (1995). Earth-moving machinery – La-boratory evaluations of protective structures- Specifi-cations for deflection limiting volume. International Standard.
• Wang, S., Huang, Y., Xiao, Z., Liu, Y., Liu, H., (2017). A Modified Johnson-Cook Model for Hot Deformation Behavior of 35CrMo Steel. Metals, 7(9), 337.