The Optimization of Welding Tool Material and Welding Parameters in Friction Stir Spot Welding of Plastics Using Taguchi Experimental Design

Yıl 2018, Cilt: 2 Sayı: 2, 47 - 53, 30.06.2018

Ahmet İrfan Yükler Mustafa Kemal Bılıcı Memduh Kurtulmus Alim Kastan

Öz

Abstract- In recent years, friction stir spot welding (FSSW) is widely used as
a joining method espically in the automotive industry. This method has been
found of use in joining of plastics. The welding parameters and the tool
material have very significant effects in FSSW joining. Welding tool material
is very important in FSSW because the tool generates heat in welding and
cooling rate in the solidification period. In this study, the dependence of the
lap shear fracture load on the FSSW welding parameters (tool rotational speed,
tool plunge depth, tool dwell time) and different heat transfer coefficient of
the welding tool have been investigated. “The highest -the better” quality
control characteristic using the Analysis of Variance (ANOVA) method was used
to find the optimum welding parameters. The experiments were arranged by using
Taguchi‟s L16 orthogonal array. The results have been analyzed by the graphical
methods and numarical data. The most spectucular result of this study was the
effect of tool material on the weld strength. The welding tool heat transfer
coefficient and the tool rotation speed were observed very effective and
important on FSSW weld strength of high density polyethylene sheets, Finally,
the improvement in the weld strength from the initial welding parameters to the
optimal welding parameters was found about 22%. 

Anahtar Kelimeler

Thermoplastics FSSW, Taguchi method, FSSW tool

Kaynakça

• [1] Wang Y, Shi J, Han L, Xiang F., Crystallization and mechanical properties of T ZnOw/ HDPE composites, Mater Sci Eng A, 2009, Vol. 220, 501-510[2] Yang CW, Hung FY, Lui TS, Chen LH, Juo JY., Weibull Statistics for Evaluating Failure Behaviors and Joining Reliability of Friction Stir Spot Welded 5052 Aluminum Alloy, Mater Trans, 2009, Vol. 50, 145-151[3] Aslanlar S, Ogur A, Ozsarac U, Ilhan E., Welding time effect on mechanical properties of automotive sheets in electrical resistance spot welding, Mater Des, 2008, Vol. 29, 1427-1431[4] Goodarzi M, Marashi SPH, Pouranvari M., Dependence of overload performance on weld attributes for resistance spot welded galvanized low carbon steel, J Mater Process Technol 2009, 209, 4379-4384[5] Cole GS, Sherman AM., Light weight materials for automotive applications, Mater Charact 1995, 35, 3-9[6] Hancock R. Friction welding of aluminium cuts energy cost by 99%, Weld J, 2004, Vol. 83(4), 40-43[7] Sun Y.F., Fujii H., Takaki N., Okitsu Y., Microstructure and mechanical properties of mild steel joints prepared by a flat friction stir spot welding technique, Mater. Des, 2012, Vol. 37, 384-392[8] Lin P. C., Pan J., Pan T., Failure modes and fatigue life estimations of spot friction welds in lap-shear specimens of aluminium 6111-T4 sheets. Part 2: Welds made by a flat tool, Inter J Fatigue, 2008, Vol. 30, 90-105[9] Mishra, R. S., Ma Z. Y., Friction stir welding and processing, Mater Sci Eng., 2005, Vol. 50, 1–78.[10] Bilici M.K., Yükler A.İ., Fidaner O., Termoplastiklerin sürtünme karıştırma nokta kaynak birleştirilmesinde kaynak parametrelerinin etkileri, Ulusal Tasarım İmalat ve Analiz Kongresi 29-30 Kasım 2012, Balıkesir, 355-365 [11] Armagan, A., Senol, M., Friction stir spot welding of polypropylene, J Reinf Plast Compos, 2008, Vol. 27, 2001-2004[12] Cevik, B., Effect of stirring time on weldability of termoplastic polymer with FSSW method, J Advan Technol Sci., 2014, Vol. 3 (2), 69-74[13] Dashatan, S H., Azdast, T., Ahmadi, S R., Bagheri, A. Friction stir spot welding of dissimilar polymethyl methacrylate and acrylonitrile butadiene styrene sheets, Mater Des, 2013, Vol. 45, 135–141.[14] Bilici, MK, Yukler, A I., Effects of welding parameters on friction stir spot welding of high density polyethylene sheets, J Mater Des., 2012, Vol. 33, 545–550.[15] Paoletti A., Lambiase F., Di Ilio A., Optimization of friction stir welding of thermoplastics , Procedia CIRP, 2015, Vol. 33, 562–567[16] Amancio-Filho S.T., Bueno C., dos Santos J.F., Huber N., Hage E., On the feasibility of friction spot joining in magnesium/fiber-reinforced polymer composite hybrid structures, Mater Sci Eng A., 2011, Vol. 528, 3841–3848[17] Chavan A., Shete M.T., Optimization of Friction Stir Spot Welding Process using Artificial Neural Network, International Journal of Science Technology & Engineering, 2015, Vol. 10, 253-358 [18] Goushegir S.M., Dos Santos J.F., Amancio-Filho S.T, Influence of process parameters on mechanical performance and bonding area of AA2024/carbon-fiber-reinforced poly(phenylene sulfide) friction spot single lap joints, Mater Des., 2015, Vol. 83, 431-442[19] Mazundar, SK, Hoa SV., Application of Taguchi method for process enhancement of on line consolidation technique., Comp., 1995, Vol. 26, 669-763[20] Ross, P J. Taguchi techniques for quality engineering. Mc-Graw Hill, New York, 1988.[21] Peace, G S. Taguchi Methods. Addison-Wesley, New York, 1993.[22] Li, W., Li, J., Zhang, Z., Gao, D., Wang, W., Dong, C. Improving mechanical properties of pinless friction stir spot welded joints by eliminating hook defect, Materials & Design, 2014, Vol. 62, 247-254[23] Minitab User Manual (Release 17). Making data analysis easier. MINITAB Inc. State College, PA: USA. (2014)[24] Tutar, M., Aydın, H., Yüce, C., Yavuz, N., Bayram, A. The optimisation of process parameters for friction stir spot-welded AA3003-H12 aluminium alloy using a Taguchi orthogonal array, Materials & Design, 2014, Vol. 63, 789-797.[25] Bozkurt, Y. The optimization of friction stir welding process parameters to achieve maximum tensile strength in polyethylene sheets, Mater Des, 2012, Vol. 35, 440-445